My Ipod got stolen a few days ago and I am trying to figure out its mac address so that i can track it. I have sshed into it several times and i found some logs for some of the sessions but I cant find its mac address anywhere. I am wondering is there a way i can figure it out with my ssh logs or some of my other logs?
View 1 RepliesI'm setting up a static IP address & I need to know the mac address of my 2 unbuntu machines? [8.04 & 9.10].
View 3 Replies View Relatedi want to know mac address of a particular ip but the problem is that i am unable to ping that ip but that ip is being used by someone in my local network that i know from my proxy logs. i want to know the mac address of that ip,
View 5 Replies View RelatedIm an academic (university networks and security lecturer) studying/teaching network and operating system security, and inspired by the work of Hovav Shacham set about testing ASLR on linux. Principley I did this by performing a brute force buffer overflow attack on Fedora 10 and Ubuntu 9. I did this by writting a little concurrent server daemon which accidently on purpose didnt do bounds checking.
I then wrote a client to send it a malicious string brute forcing guessed addresses which caused a return-to-libc to the function usleep with a parameter of 16m causing a delay of 16 seconds as laid out in [URL] Once I hit the delay I new I had found the function and could calculate delta_mmap allowing me to create a standard chained ret-to-libc attack. All of that works fine. However .... To complete my understanding I am trying establish where I can find the standard base address for ubuntu 9 (and other distros) for the following, taken from Shacham:-
Quote:
[code]....
/proc/uid/maps gives me some information but not the base address ldd also gives me the randomised starting address for sections in the user address space but neither gives me the base address. Intrestingly ... when a run ldd with aslr on for over (about) 100 times and checked the start point of libc I determined that the last 3 (least significant) hex digits were always 0's and the fist 4 (most significant) where between 0xB7D7 and 0xB7F9. To me this indicated that bits 22-31 were fixed and bits 12-21 were randomized with bits 11-0 fixed. Although even that doesnt define the boundaries observed correctly.
Note: I am replicating the attack to provide signatures to detect it using IDS, and for teaching purposes. I am NOT a hacker and if needed to could reply from my .ac.uk email address as verification.
Please let me know:1. What LDAP logs are typically available2. How to find them3. How to Parse them
View 3 Replies View RelatedWhere can I find Empathy logs of MSN multiple conversations?
View 1 Replies View RelatedI'm looking for a way to get my IP address using the command prompt in Linux. I know when you type "ifconfig" you can get your local IP address (i.e. 192.168.0.103), but I'm looking for my IP address that I get from my ISP. How can I get this from Linux without having to visit some website?
View 3 Replies View Relatedwhen i send any packet to anu destination and want to see he mac address of source and destination i am using the command tcpdump -qec1 but rather then getting the mac address of source and destination each time i am getting mac address of the system which is broadcasting. will anybody tell me how can i get source and destination mac address even if any other packet is also being broadcast to my network.
View 1 Replies View RelatedHow can i find out what mac address had been configured by factory default. I changed my mac address with
Code:
ip link set addrs 00:01:02:03:04:05
and now want to have the original one back. I'm having some trouble with a gigabit LAN PCI Express card. Namely the 89156 from delock. Output of dmesg
Code:
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.137225] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.137268] r8169 0000:02:00.0: setting latency timer to 64
[ 4.137346] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[code]....
So the card was recognized by the kernel. The driver was loaded and everything fine.... should be! But after assigning an ip addr and setting the nic up with
Code:
ip addr add 192.168.1.1/24 dev eth1
ip link set dev eth1 up
the kernel complained about something like that
Code:
?SISTEM? Can't assign address Also I could not find anything useful on the net finally the readme gave me some. So i changed the MAC address and everything was fine. The nic came up and got an ip through dhclient.i want to know why the old/original mac address didn't work. But even after reboot the new mac address remains. All I know the old one begun with 7b. how to get the original mac of a nic?
I have installed Kubuntu Lucid x86 10.4 LTS for the first time. Has anyone got a link that explains how KPackageKit gets the IP address of the repositories? I can install packages using sudo apt-get install xxx OK . KpackageKit tells me I have updates from the repositories. I can select them all and apply , but I get an error that it can't find the repository under a 192.168.100.129:8080 address . Which is not a surprise . I am using mirror.optus.net as a repository and can ping it fine on the command line. So is there somewhere else that KPackageKit maps IP addreses ? I have tried another mirror mirror.aarnet.edu.au and got similar results. My local sub-net is not 192.168.100 and have tried setting fixed IP on the local sub-net and different DHCP addresses and still the same error.
View 5 Replies View RelatedI am trying to find IP address. In a socket programming tutorial, I found :
Code:
$ nslookup localhost
command. It gives me a address. However, one colleague told me :
Code:
$ ifconfig
It also returns me inet_addr. But both are different. Kindly tell me the correct method to find IP address? I have also checked the /etc/hosts file but it says "localhost"
I would like, from a C program, find the hardware MAC address of the default route path. With BASH I can do a 'route' find 'default and then an ifconfig and grep for 'HWaddr'. Are there C calls to do the same??
View 12 Replies View Relatedcreating a mailing list I need a software that can do that. Other formats like txt or rtf would be great too, as I can easily convert.
View 4 Replies View RelatedWriting a program that finds the IP address of a host name. Sorry forgot to include the line numbers, but where the $$$ is where the syntax error is. The errors are syntax error before "{" token and syntax error before "if". I've looked throught the code for a couple hours and can't figure out what's causing it. The code is attached below.
#define WIN
#include <stdio.h>
#include <stdlib.h>
[code]....
If i have a shell script to run on a Linux unit, which has a command to Reset(or say upgrade) the unit in between the script.Is it possible to find out the memory address of the next waiting command so that i can store the address to any environment variable in flash , then after Reset will continue Run from the stored address.
View 3 Replies View RelatedIs there an application that will take the data from an Open Office spread sheet and locate and mark each address on a map?I've got a long list that I need to sort and locate by zip codes.
View 9 Replies View RelatedCurrently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies View RelatedI am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies View RelatedI have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies View RelatedIn my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies View RelatedI dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
how to assign a address to my ethernet card all the options available
View 1 Replies View RelatedI am trying to connect my 2nd Gen Ipod to Xubuntu and import my music collection onto the Ipod. I am having real problems with this. Rhythm Box does not recognise the Ipod with the plug-in, I have tried Amarok, but each time I tried to open it, it just crashed, tried sending a bug report but that did not want to work. I have also tried Exaile with the Ipod plug-in but when you go to the device manager you can click on the Ipod but nothing happens. I have tried looking at the Exaile forums but this seems to be a problem for others as well. The Ipod mounts ok, now a bit stuck.
View 1 Replies View RelatedIts a dell e510 with about a gig of ram. I'm struggling to get my ipod touch working with the gtkpod ipod manager. At this point my ipod shows on my desktop when i connect it via usb. I cannot set up the repository for it in gtkpod because i dont know the location its mounting to. if its mounting at all. so my question is. how can i tell where my ipod is being mounted? I dont have a clue what to look for in the terminal results for "df -a"
But this is what i get:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 152357444 65577992 79040140 46% /
proc 0 0 0 - /proc
none 0 0 0 - /sys
[Code]...
Edit : Itouch = first generation 8gb Edit 2: I would like to create a sticky thread that helps new users answer questions about ipods. Will a moderator please let me know what i should include in their opinion? ex. using wine to run itunes, gtkpod and how to set it up, using mm players like banshee and songbird... what version of ubuntu works best with the ipods.
I've been trying to get my iPod touch (8GB, jailbroken) to connect with gtkpod iPod manager. But whenever I try to load the iPod I get this message.
Quote:
iPod Database Import Failed: 'illegal seek offset 0 (length 4) in file '/media/ipod/test/iPod_Control/iTunes/iTunesDB'.'
tranferring Ipod audiobooks (m4b) files to my Ipod. I can't get them to transfer with GTKpod or Rhythmbox. I did manage to get a file copied, but it didn't show up on the Ipod.
View 2 Replies View Related