Ubuntu Servers :: CUPS Very Long Delay Between Sending Jobs And Printing?
Feb 17, 2011
I've set up a cups printing server using ubuntu 10.04.1 LTS. The printer's a HP Laser Jet 1018 I can connect to it over vpn using openvpn from my netbook which is also running ubuntu 10.04.1. I can connect to the printer all right and test page prints without a problem. But if I try to print anything else, it take at least 5 minutes before the job is successfully send and printed out.
Also, on the client side, for example, the file size would like 500k, and when it finally prints out, the file size on the server side is less than 10k. The file is a black and white document, and from what I can tell, the printed page is not missing any information.
View 3 Replies
ADVERTISEMENT
Nov 16, 2009
Since my last server upgrade, last Thursday, cups is having a strange behavior: I have 3 text-only printers, and an application that prints to them. The application, to print 5 lines, it sends 5 jobs to the printer. Before the upgrade, all the jobs where printed sequentially, without any delay. After the upgrade, cups makes a small delay (5s or more) between every one...Its very annoying for the users...
View 1 Replies
View Related
Aug 26, 2010
Not sure if this is hardware or software so I am raising the question here. I have an Ithaca 280 printer that worked great on fedora 8 with cups 1.3.3. When I upgraded my server and installed Fedora 12 with cups 1.4.2 i noticed a 5 second delay between sending a print job to the printer and it actually printing. This issue doesnt happen with laser printers, just the ithaca thermal printer. I have tested this with 10 other ithaca 280 printers and all of them have the same result. I am using a raw driver, and it is an IP based printer setup for Jetdirect in cups. The setup is identical on a Fedora 8 server as it is on this Fedora 12 server. I have even taken the steps to upgrade to cups 1.4.4 just to see if it was corrected in a newer version, but the issue is still there. I have a utility that writes the raw text directly to the printer which i used to test that it wasnt an issue with the printer or its internal print server. That utility allows the document to print immediately.
what is causing this delay and how to correct it? If not, does anyone know how to print directly to the printer using cups instead of letting it go to the queue first like cups normally does for print jobs?
View 2 Replies
View Related
Jan 17, 2010
I connect my laptop to several different networks and need to print in each of them when I am connected there. In the past (ie 12.2 and earlier) I solved this by running a cups server on the laptop and having it poll the appropriate cups servers in each network.
I was thinking that perhaps in 13.0 I could bypass having the cups server on the laptop and that KDE would "see" the various cups servers available. However this does not seem to work...
View 5 Replies
View Related
Mar 22, 2010
I recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies
View Related
Apr 1, 2011
What you do if the job takes a long time to finish and you don't want to wait.Say, I ssh to a remote server from my laptop and start a long-running job. Then few hours later I ssh again and inspect how did job run, its uotput and etc.
View 2 Replies
View Related
Jun 13, 2011
i want to recieve mails to my emial id for the cron jobs i have assigned in linux command line..
View 1 Replies
View Related
Apr 30, 2011
I have a problem with cups dropping print jobs. The machine fedora 13 installation using cups 1.4.4-10
The dropped jobs happen only rarely happen and therefore is difficult to debug the problem since it doesn't happen 99% of the time. This morning (while in the shower) I wondered if the lost jobs are lost because they are timing out, perhaps because of slow input from a user. I can test this more later in the week..
The print jobs are initiated from within a COBOL program. COBOL opens the print file as output and at this stage a job appears in the print queue with a status in the print queue of "held".
The user types in various bits of information and when complete the program executes the final write to the output print file. The job is somehow released and then is physically printed by CUPS. I suspect that if the user is slow the "held" job times out and then the job is lost.
There are a number of timeout directives in cups.conf but I am unsure which might be appropriate in this case. Or perhaps there is some other timeout thing happening.
View 3 Replies
View Related
Jan 7, 2011
I'm running ubuntu on a macbook5,4, and I get a 30-second long pause during the boot sequence. (I have quiet turned off.) This shows up in dmesg as:
Code:
[ 1.847208] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.000059] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.239138] hub 4-1:1.0: USB hub found
[ 2.242107] hub 4-1:1.0: 3 ports detected
[ 2.590102] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 2.672282] scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
[ 2.672863] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.674243] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.160035] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 3.492058] usb 4-1.1: new full speed USB device using ohci_hcd and address 3
[34.373586] udev[417]: starting version 163
[34.422599] lp: driver loaded but no devices found
[34.503755] lib80211: common routines for IEEE802.11 drivers
[34.503759] lib80211_crypt: registered algorithm 'NULL'
[34.508256] wl: module license 'MIXED/Proprietary' taints kernel.
[34.508260] Disabling lock debugging due to kernel taint
Details:
Linux jagadai 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux
Grub.
Dual boot with OS X 10.6.4 using rEFIt. It shouldn't be at all relevant, but I'm using E17 on top of kdm.
View 3 Replies
View Related
May 22, 2011
I'm running Natty with Unity 3D. I had a long black screen with no Plymouth Ubuntu logo boot. After the black screen, Natty loaded straight into desktop.
Then I installed this [url] Which now gives my Grub2, about 10 seconds of black screen, Plymouth Ubuntu Text boot and then desktop.
Any way to remove that long delay?
HP Pavilion dv7 Notebook PC
Ubuntu 11.04 amd64.
NVIDIA Driver Version: 270.41.06 (Recommended driver)
1440x900-24 Resolution
View 3 Replies
View Related
May 12, 2011
I've setup two printers through a system running Ubuntu server that are shared with 30-40 users on our school network.
If the printers run out of ink or paper, they stop printing. The lazier members of staff don't proceed to recharge the ink or paper so when somebody does, hours later, the old jobs start printing again which the teachers no longer need or want.
I'd like to automatically have my system purge print jobs older than 1 hour. I'm running CUPS and sharing the printers through SAMBA. How do I do this?
View 1 Replies
View Related
Aug 22, 2011
I just installed Fedora on my desktop (previously Ubuntu)
The root and boot partitions are on a OCZ RevoDrive, which is seen as 2 separate drives and used software raid0 for speed.
Here is a link to my bootchart, which shows a 17sec delay before anything starts.
[url]
md0 and md1 are on the RevoDrive, the boot is a raid1 partition (as i was unable to boot from a raid0 partition) and the root partition is a raid 0 partition
Code:
Any one know away to get rid of the delay at the start of the boot chart?
View 3 Replies
View Related
Jul 1, 2011
I need to check if I've printed a document. For what I've been reading, going on [URL] and clicking on "Show completed job" should do what I need to do, but it says "No jobs".
View 1 Replies
View Related
Aug 9, 2010
My problem is that every time I use the Ethernet connection (I don't have wireless card) there is a delay of around 30s, even though my download speed is not affected at all once the connection is "established" , no matter what application I use (Synaptic, ssh, firefox, google chrome,wget, update manager, etc.). A weird thing is that my ethernet connection always appears as active.
I'm sure I'm not the only one who has experienced this issue, since I've read the same problem on other forums, but no one has come up with a solution. I hope that there will be a solution at last by this time.
I've been around with this problem for about 1 month, I've tried all sorts of tweaks that involve disabling ipv6 and nothing happens. I don't really know what triggered off this issue because it all started all of a sudden and I don't remember having installed any important update by the time this happened (I did a clean installation of Ubuntu 10.04 32bits on the release date).
View 3 Replies
View Related
Dec 25, 2010
I'm having a problem where almost every audio player creates a 2-3 second delay after playing any audio.
I'm working on some text-to-speech using espeak and festival. Festival would provide much better speech quality, but it created a 2-3 second delay after any speech before the application exited, which prevents using it. When I started investigating the issue, it turned out that many other programs display the same behavior.
For example, if I play a 1-second WAV of silence using "play", it displays "Done" very soon and then waits for 2-3 seconds before exiting. mplayer does the same. mpg123 does the same. mpg321 does the same. ogg123 does the same.
When playing multiple files mpg123 and ogg123 do not generate the pause between the files, but mplayer does. I'm wondering can there be a bug that causes programs to hang when closing the audio device?
That's so many programs it must be some kind of problem in the system, not the individual programs. However not every program displays this behavior; espeak exits immediately after the speech has ended. (Might it for instance exit without closing the audio device properly?)
I haven't noticed anything similar before I upgraded to 10.10. I'm running XUbuntu on a Thinkpad T60. The laptop has an Intel HD Audio with AD1981HD codec [url].
View 3 Replies
View Related
Jan 26, 2016
Im experiencing a long delay before the gdm login screen appears in debian jessie with kernel 4.4 and also with the distro kernel 3.16
there in the Xorg.log
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 22.516] X Protocol Version 11, Revision 0
[ 22.516] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
they claim to have fixed the issue after kernel 3.4 so i must have some missconfiguration causing this loop.
View 2 Replies
View Related
Feb 21, 2010
I'm trying to track down a longggg delay during OpenSUSE 11.2 boot. It's 1 to 2 minutes long.
1. I upgraded the kernel to "vmlinux-2.6.31.12-0.1-desktop.gz" a while back, and I'm "kind of" thinking this is when it began. It seems in previous versions (I came from 10.3) that the grub menu always contained the previous version. That doesn't seem to be true in 11.2. Is there any way to tell OpenSUSE YaST/zypper to keep the previous version and leave the entry in grub?
2. What does this message mean: "BIOS EDD facility v0.16 2004-Jun-25, 2 devices found"?
I haven't pinpointed the error, and there is nothing really obvious in /var/log/messages. The drives are there, and the network is up. I'm sort of leaning towards the new kernel. What processes wait 60 seconds? If I watch the console closely for the message before the delay, it can vary.
View 6 Replies
View Related
Apr 26, 2010
I am having a problem with internet browsing. Whenever I type the address of any webiste like Google
or URL...or any other, the firefox gives message at "Status Bar" that "Looking up google.com" or "Looking up yahoo.com" etc for every website for about 20-25 seconds and than launches the website successfully. Why this is happening and how can I correct it?I also tried this in Opera and Google Chrome and same problem occurs in them.Moreover, if I ping any domain inside terminal, it instantly starts pinging (with ttl 51) and recieving data from that domain resulting that the problem is with browsers.
View 1 Replies
View Related
Apr 23, 2010
I have a 5,2 macbook pro, and I use refit to boot my ubuntu partition. I do not have an OSX partition on the local drive at all. The only partitions that are on the drive are the EFI, ubuntu and swap. Refit lives on the EFI dos partition.I am experiencing a very long delay on power-on before the system will load refit (probably 20-30 seconds) Once it loads everything is normal.
View 1 Replies
View Related
Mar 28, 2011
After I boot up into 11.4, the desktop/icons appear but then there is a delay of about 20 - 30 seconds before the bottom-right task bar items appear. During that time, I can't start any applications. This happens on both desktop PC's, very frustrating and not present with 11.3.
View 9 Replies
View Related
Feb 7, 2011
I have a 11.3 machine as a print server sharing out a printer Then I have two clients using that printer. One 11.3 and one 11.4 6 of 6. When I print from LibreOffice on either machines every other print job disappears. I'm a bit puzzled ! It's not random it's exactly every other that doesn't show up at the server. It's not in the server job log.
View 5 Replies
View Related
Jul 18, 2011
I have a Macbook 5,2, on which I'm triple booting OS X - Linux - Windows, using bootcamp and rEFIt.I had a variation of Ubuntu 10.04 called Uber Student as the linux installation.I installed Ubuntu 11.04 AMD64 instead, by choosing the EFI boot option.Now this gave me some problems. When I shot down, the Macbook gives me a troubling long beep sound.When I start up, I'm still able to boot up into rEFIt and Grub2, but there is a big delay with the screen being black for about 30 seconds and the little white light in the left corner of the Macbook is blinking feverishly. I read something about a guy which had a similar problem and the process seemed to mess up the firmware on his Macbook, so he had to have his MB changed.
What's up with the scary beep sound and the long boot up delay?Secondly, when I want to do an update of the Ubuntu system, the update manager asks me to do a partial upgrade, which includes removing the grub-EFI, resulting in a system that won't boot...
View 2 Replies
View Related
Jan 27, 2016
When I boot up, or come out of standby, etc, it takes about a minute for my Windows shares on Win 7 to show up under Network. Is there anything I can try that will make this initial connection faster? Either on Debian or the Win7 machine? I have the latest Debian vanilla. This is over wifi. My other devices list the shares right away.
View 1 Replies
View Related
Mar 12, 2010
Anyway im trying to do a simple thing pointed out in the thread title. Everything is set up, cups-pdf works, in dosemu.conf lpt1 command is "lpr" printer-timeout is 10... I "work" in an accounting agency that has a program written in clipper back in 1992. Apparently some prints from this program produce text/plain and some produce application/octet-stream. text/plain is printed. The later is always aborted. I have uncommented the lines in mime.types and mime.convs. Which are located in /usr/share/cups/mime.
View 2 Replies
View Related
Nov 30, 2010
I'm not looking to setup a print server. I want to print documents TO an existing network printer while I'm logged in via ssh to my Ubuntu Server 10.4 command line shell. Things like admin emails, pdf docs, etc.
All the clients on my LAN are able to print directly to the network printer without any help from the Ubuntu Server. I don't want to setup CUPS on the server unless that's the only way to print from the server itself to a networked printer.
Do I need CUPS or can I print from the command line in some other way?
View 4 Replies
View Related
Dec 19, 2010
I can't print to pdf through the "cups-pdf" print module. Here is my error logfile:
Code:
@ubuntu:/var/spool$ cat /var/log/cups/error_log
E [19/Dec/2010:20:52:44 -0600] [cups-driverd] Bad driver information file "/usr/share
[code]...
View 2 Replies
View Related
Apr 4, 2010
I'm doing work at a home office that uses all Ubuntu computers. They have wireless printing setup on a few computers using CUPS. One of the computer's wireless printing isn't working. could someone please help me with getting this set up? Is this something really basic that most people would understand how to do?
View 4 Replies
View Related
Mar 22, 2011
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
View 6 Replies
View Related
Apr 2, 2010
I am doing work at an office that only uses Linux Ubuntu 9.10 . They have wireless printing setup on all of the computers there, except one of them isn't working. I was not the one who setup the wireless printers so I'm not clear on how to do this.
View 2 Replies
View Related
Apr 22, 2010
I am facing a peculiar issue when printing Japanese text through CUPS (though I am not sure if this is the right forum).
I developed a Java application (that uses a graphical object to print to a PrinterJob class) that prints text (of Japanese characters) to a printer. When I login in en_US/en_UK locale, the Japanese characters get printed from my Java app just fine. However, when I login in ja_JP and give a print job through my Java app, no Japanese text is printed at all. I get characters from only within the ASCII subset printed instead. I am using Serif and Courier New fonts in my app. Relevant details are:
In ja_JP,
a@a:/usr/share/cups/charsets$ fc-match serif:lang=ja
ttf-japanese-mincho.ttf: "Sazanami Mincho" "Regular"
a@a:/usr/share/cups/charsets$ fc-match sans serif:lang=ja
ttf-japanese-gothic.ttf: "VL Gothic" "regular"
[Code]...
View 1 Replies
View Related
