I want to turn my Suse into a Router. I already turn the forwarding to 1 but what else needs to be done? I am certified as CCNA for CISCO so are the commands on the Linux in a simulated environment similar? The perfect solution for me would be commands similar to the cisco ones.
View 4 RepliesWhat i need to do is to do ssh to router and do command shutdown before the apccontrol turn off the system, i've been now working to do that on python with twisted module but not finished yet, is there any way to do like that just using bash script?
And this is the first time i used apcupsd and i'm just do the basic like manual said and it's work good, is there any configuration than default that i must to do in apcupsd.
I have an old hp that i installed ubuntu on and I was wondering how I can turn it into a real router. By real router I don't just mean broadcast the internet but use security software, configurations, and all the stuff normally found on a real router. What are the steps i need to take? I dont have 2 NIC's in it just one but I do have a wireless usb that I can just stick into it.
View 1 Replies View RelatedI have Suse 11.1 and am running a customized server on it that will take care of mounting/unmounting media (DVD, USB key, etc) on its own ..How can I get Suse to stop mounting the media automatically when I insert a dvd into the drive or plug in a USB key? I already got it to stop opening a window showing the contents, now need to get it to stop mounting automatically ..
View 5 Replies View RelatedLast friday I went home from work and just turned off my monitor, as a program I had written needed to run a durability test over the weekend. Unfortunately it seems that the moment I turned off my monitor, Linux just froze, quite evidently as it said this morning that the time was still Friday 17:13.
From the syslog I got the following on that time:
What this means and what I can do? It's not the first time it crashes as soon as I turn my monitor off.
I just build a couple production SLES 11 machines and I'm using an ssh client to connect. However the ssh client forces me to use keyboard interactive login. How can I turn this off so I can use the normal username / password?
View 1 Replies View RelatedI took a video of a tall object with the camera turned 90 deg. I now wish to edit the video to turn the picture to the horizontal. Is there a Linux application that will do this that runs in Suse?
View 4 Replies View RelatedBecause of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedI'm using ZyXEL 660HW T2 router for my internet connection. The router is already set up.., my connection is working on winXP(just plug the cable and that's it). How to connect my suse 11.2 to internet? I tried to setup in YaST --> Network Settings
********************************** Code: OUTPUT OF "lspci":
linux-1c1l:~ # lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
[Code].....
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I'm building a new router for my home. I have a pci-x motherboard with two network connections on the motherboard, SUSE 11. I intended to use one network connection for the external zone and the other for the Internal zone, (the internal port going to a four port switch). Recently, a friend gave me an "Intel PRO 1000 MT PCI-X Quad-Port Adapter C32199" which will plug into my motherboard, presumably giving me a total of 6 (4+2) network connections. 1) Can it be as simple as setting one network connection to "external zone" and the other five to "Internal zone", and plug my other computers into the internal zone connectors, eliminating the need for a switch?
2) There seem to be a lot of these QUAD server adapters on Ebay; how where they originally used?
3) Can I dedicate one internal net-port for some exclusive traffic (e.g. all mail, going to network connector 3, connected to the mail server)? IPtable rules?
These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
I've moved a linuxbox from being my gateway (nat, etc) to behind a new gateway (a DD-wrt router). For transparency purposes, I'd like to continue using the old box services, and just have the gateway in front of it.
Here's what I did:
The newgateway is setup for class C, 192.168.0.0
This configuration works, but sometimes it doesn't and I haven't figured out why yet.
At sometimes, clients on the LAN get throughput rates with very little speed loss (using speakeasy speed test). They will run at 33M on the LAN, running through both the newgateway, and the oldbox, and get about 35M with directly connected to the cable modem.
Other times, it seems nothing can talk with anyone, and I am not sure why.
I know what I have done is a little unconventional, but it's a transitional thing, and I am not sure it is the cause of the problem, although it was the last things changed.
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedI want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies View RelatedI moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedI am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
View 2 Replies View RelatedI have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
This is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
How do I make a router by Linux?In other words you want your Linux to work as a router.
View 10 Replies View RelatedWi-fi adapter is switched-off only in Windows or BIOS, and there is nothing built-in NetworkManager not able to do, put the different eee applets - not a solution either. It is worth Netbook Remix 10.10, asus eee 1001ha. All other shortcuts work fine (sorry for my english)
View 1 Replies View Relatedswitched from 4 years Ubuntu use due to Unity, and thus also new to this forum but I hope that you can help me, so I later on can give back to the community.My problem is that the Wireless in Network Manager refuse to go to "on", or to be more correct it goes to "on" for about a second and then back to "off". My computer which uses F15, a Lenovo B560 laptop, have a BCM4313 and the apparent reason is that after that I installed the broadcom-wl and run "su -c 'modprobe wl'" so did I get the response "FATAL: Driver not found". However, the earlier non-existing wireless button in the network manager appeard after the installation, id est the broadcom-wl must have been in plase.
View 2 Replies View RelatedIwlist wlan0 power:
wlan0 Current mode:off
iwconfig wlan0 power on: This does not work
ifconfig wlan0 up: does not work
[code]...
I have access to a server via ssh. I'm allowed to install things in my userspace. Furthermore, I'm allowed to use the bandwidth. I paid for access to this server, so they're pretty much ok with me doing things with my space. They told me not to store over 20 GBs of data, and I've kept to that rule.
Basically, I want to be able to turn it into a proxy. So, in a way, I want to redirect all of my traffic to that server. If I have a request, it goes to the server, and any replies come directly to my box.
So, this would be a proxy, right? I only have SSH access, I think. Maybe I have some other forms of access, but I can't remember.
How would I go about doing this?
Here's what I have in mind:
(my box) ----request---> (the server) ---> {internet}
(my box) <----reply/incomingdata---- (the server) <---- {internet}
I have this old PC that I want to turn into a File Server. I want to use my laptop as the MAIN computer that will access the File Server (Old PC).
View 9 Replies View Relatedi have an hp zv 6000 laptop. I cant get the wifi button to turn on. It sees the card has drivers loaded but because the quicklaunch will not function i cant get the thing to turn on. is there a way to force the hardware on by bypassing the buttons. Some of the button do work though. the music button brings up the media player.
My system is a dual boot with xp. buttons work with xp. wlan on in bios. if windows is not running i cant make the button work. just so you know i am kinda a noob at ubuntu. used to run redhat back in compsci days. been a while.
[Code]...