I'd like to host my own email accounts. I have a Fedora 12 build that I like to use for doing this.
Only this is I don't know what all I need even get started. The book I have on RHEL talks about different email protocols and all but doesn't explain how to "do" anything.
Debian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies View RelatedMy domain [URL]... has recently been moved to a new server. Since then, I have not been able to download email. Email sent to the domain can be seen in /var/spool/mail/akwebsoft, just as on the previous server. However when I go to download the email, I get the following error message (in part) in my fetchmail logfile:
[code]...
I have 2 clients (one IP 200.x.y.52 and another 200.x.y.47) in ADSL conection and a same gateway (200.x.y.1).
When the server send an email, the error "No route to host" appear. I used TELNET 200.x.y.52 25 (110 soo) and the error occurr in both servers and both directions. The Firewall was disabled .
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
Have someone used Linux heartbeat to send email when the Slave server becomes the Master? I've read I can configure the MailTo under.
But I really don't know how to do it. I basically need my primary server to send an email when it becomes inactive and all the activities are manage by the secondary node.
I was not sure if Desktop meant 'Desktop vs Server', or Desktop as in relation to Windows Managers.
I want to move a domain from one web host to another. I also want to preserve my email. Does anyone have a recommendation for software which will allow me to:
(1) Copy current web host email locally
(2) Switch web hosts
(3) Populate new web host with local copy
I've looked at imapcopy and imapsync. Unfortunately, both want Server -> Server. I briefly looked at setting up a local IMAP server (dovecot-imap), but it is clear that this is more ISP-grade. I did not see a quick example of user management in [URL], and I don't really want to spend days working on the configuration.
Any recommendations for software that allows me to 'backup' and 'restore' to/from a local file store?
I have nagios running fine on Linux. I would like my nagios system to forward all the emails to our internal SMTP gateway. How can I configure this? Is it necessary to run sendmail on linux to achieve this?
View 5 Replies View RelatedI'm attempting to send email with a PHP application I got from a textbook. Do I need to start an email server in order to get the application to work?Using SuSE 11.2
View 5 Replies View Relatedis there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies View RelatedIs there a way of allowing only certain domain to send e-mails to certain specific e-mail address. I am using Sendmail, and I have an alias which translate to certain members of staff within my organization. I don't expect e-mails from outside our domain to be sent to this alias e-mail address.
View 1 Replies View RelatedI have recently setup a new mail server and have simulated sending and receiving on the new email server. The new email server will replace the primary one.I would like to setup the new email server in parallel with the existing one.This way i can observe issues that might occur and be aware of what could go wrong. I want to received mail to be delivered to both mail servers at the same time.I would like to use postfix, exim i find a bit to difficult to understand.I have thought of using transport maps, the only problem is that you can only forward mail to one server at a time using transport maps.I think recipient_bcc_maps and sender_bcc_maps could work, i would just like ideas of how i can do this.
View 5 Replies View RelatedI just downloaded Ubuntu for my OS and am trying to setup my email.First it asks me for my password. How do i find the password for my email on host pop3.live.com ? Would it be the same as the one for my email account at hotmail? i don't get it. I don't remember setting up one for email on Evolution.Also when i try to send a message it says " Unable to connect to pop server pop3.live.com: No support for requested authentication mechanism.
View 9 Replies View RelatedI have a user who was getting constantly spammed so I deleted their email account but it's still coming in and trying to get delivered, how do drop all email for a specific email address?
View 4 Replies View Relateddammit... all that typing and I hit the wrong "submit" button. *sigh*
Ok, I have a couple of SMTP servers for our infrastructure. They are running Postfix. I have them configured so that specific email addresses such as support@mydomain.com and billing@mydomain.com all go to a new support server that I am building with osTicket. Lets call that server SUPP1.
SUPP1 runs sendmail from the default install of CentOS 5 i386. At this point everything runs great. New emails get added into the osTicket system via a pipe in sendmail. Here's where the problem comes in. In order to accept mail, sendmail has to have the domain listed in local-host-names and the addresses in virtusertable. That works just dandy. But in doing so, sendmail believes it is the destination SMTP server for "mydomain.com". That means that I can't send mail from that server back into my normal SMTP servers. So things like the LogWatch, cron jobs, etc can't send notifications. Is there a way to work around that? For sendmail to ignore local-host-names for outbound email or something?
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies View RelatedI am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedI have installed the Apache, PHP and MYSQL in the rackspace cloud server environment. Can anyone please guide me How can I configure email server in that with postfix or some other with multiple domain.
View 3 Replies View RelatedI am having problem to collecting email from remote POP3 (all the emails for a domain is stored here) and distribute it after collecting to several users defined to Linux server. I have install postfix in Linux server for email distribution.
View 3 Replies View Relatedi need to configure postfix on centos to relay email from the internet to the Exchange Server and i also need that emails sent from the exchange within the same domain be sent to postfix then resent to exchange because i have spamassassin and clamav installed on centos to filter all incoming and outgoing mails ...
View 1 Replies View RelatedAfter installing postfix on my server , all emails sent by a PHP class that i built , are received to spam folder , no matter what i do .am not an expert , except in PHP , the class i built works fine everywhere else except on this server , so i think the problem might be from the server it self ?some told me wrong configuration/software on my server , others told me wrong DNS stuff . actually i don't understand the DNS stuff , and am not an expert in linux softwares and services but i cann install/configure them , so could anyone please check the DNS for problems ?
View 3 Replies View RelatedI have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
One of our client having issue with the qmail. The issue is if any one send email to abc@ourdomain.com (abc@ourdomain.com the email address which is not exist) it should send failure notification i.e."email does not exist" to the sender. The qmail server is not notifying that email address does not exist.
View 1 Replies View RelatedLooking for some advice and guidance please? Which free Instant Messaging server & Email server is best for SUSE 11.4?I have an office with a mix of approx 20+ Windows 7, Macs desktops, and we want to bring our email and instant messaging services/solution in house.Im technical, so am not afraid to dive in feet first, but being relatively new to Linux can anyone advise a good free product(s) which would work in this kind of setup bearing in mind the windows and mac desktops need compatible clients?
View 1 Replies View RelatedHave anyone try the latest Debian 5 iso CD? I got installation problem. It is the select and install software stage. If I select only
Code:
[*]Desktop Environment[*]Standard
I want to select web server, email server, the installation fail.
i have setup mailrelay using postfix and relay email to exchange server. The problem is how can i relay email to multiple exchange server. For example: -
domain aa.bb.com relay to exchange server 10.10.10.10
domain 123.test.com relay to exchange server 192.168.10.5
I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
We are using axigen with redhat
linux how to check if email server machine doing spamming.
Wanting to join my CentOS5.3 to a windows 2003 active directory. Configured kerberos and samba.
Code:
[libdefaults]
default_realm = domain
dns_lookup_realm = false
[code].....