I have 2 clients (one IP 200.x.y.52 and another 200.x.y.47) in ADSL conection and a same gateway (200.x.y.1).
When the server send an email, the error "No route to host" appear. I used TELNET 200.x.y.52 25 (110 soo) and the error occurr in both servers and both directions. The Firewall was disabled .
My domain [URL]... has recently been moved to a new server. Since then, I have not been able to download email. Email sent to the domain can be seen in /var/spool/mail/akwebsoft, just as on the previous server. However when I go to download the email, I get the following error message (in part) in my fetchmail logfile:
[code]...
Debian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies View RelatedI cant send mail outs. I'm receiving
Quote:
When try send mails from pop3/imap or directly "root]#mail some@domain.com" but I CAN send mails to domains created in the server.
I stopped Iptables and still the error. The server is a common WHM/Cpanel installation with Centos 5.
Connection closed.
I installed ntop on our server, after installing it, i ran ntop as a daemon. shortly after we lost the ability to ssh into the server.tried restarting ssh, but it didn't work, so had to restart the entire server.Where should we look to find why ssh suddenly stopped?
the error ssh gave when we try to connect was like: ssh: no route to host what log files should i look at and what should i look for to find the cause of the error?
I am using Fedora-10 on 64-bit quad-core xeon processors. I ran ssh-keygen and established passwordless connection between host-client and created a host file named lamhosts as follows:
172.16.122.11 cpu=4
172.16.122.21 cpu=4
where 11 is the host server and 21 is one of the nodes. When I executed 'lamboot -v lamhosts', it failed to boot nodes ssi:boot:base:linear: Failed to boot n1 (172.16.122.21). By googling, I found the error but couldn't yet find a solution.
I am trying to share directories between two F12 machines on a local network with a router box doing DHCP because not all machines on all the time. Web access is fine and local ping and ssh works but telnet doesn't. I have never succeeded doing mounts. So I have been searching for things to fix the above and have just tried rpcinfo. If I do this :
rpcinfo -p 192.168.2.2 it gives rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host. Does that suggest that actually there is an installation problem? So I tried "yum provides portmapper" and that gives "No Matches found".
Ok so I just installed Ubuntu 10.10 Server Edition. On the very first boot, everything seems to run perfectly. I can SSH into it from any remote computer with no problems. However, the installation of certain things calls for a system reboot, which 2 days ago never would have been a problem. But now for some reason, the SSH server only wants to work on the very first boot of a clean install. After I reboot it, I get the ssh: connect to host 192.168.0.180 port 22: No route to host error. The absurd part is sshd is running! I've even tried restarting sshd, restarting the server, and using both 64 and 32 bit installs. The only way I can get anything to connect to it is by using ssh localhost. It won't even let me connect using the IP on the local machine!
View 1 Replies View Relatedusing redhat on server machine and open suse on client machine.i have installed nfs server and and it is running properly but when i want to mount shares from my client machine it gives the following.
error. "mount.nfs: mount to NFS server '10.3.31.146:/share' failed: System Error: No route to host" both systems ping each other and firewall is also disabled. another problem is when i remotely access from my server machine to client machine it gives the following error ssh:connect to host 10.3.31.147 port 22:connection refused what can be the problem?
I'm setting up apache on centOS 5.5 and administering it from another host on my LAN(this web server has no Xorg). I can ping from the config host to the web server but not the other way. My network is quite a way from being set up so i'm just configuring the web server at the moment, the simplest way i can. It's just trying to get two LAN hosts both with 192.168.1.0/24 I.Ps to talk to each other using a router to connect them.
Here are the outputs of ifconfig and netstat -rn for the web server, the config host and the router:
The ifconfig -a and netstat -rn of the config host are:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
[code]....
All I want is to be able to access files on one Ubuntu computer from another Ubuntu computer via a home wireless network. I have been at this for a week now. Scouring the web for answers and so far I have come up with this: Port 22 is open. I have both computers IP addr's via right clicking on the network icon-> Connection Information. ssh is installed and running. Both computers are listening on port22. But when I try Places->Connect to server, I get "no route to host". I'm not a networking guru and I'm at a complete loss on this.
View 9 Replies View RelatedI am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try.
Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
The Fedora 12 machine has the NFS server running, and the corresponding entry in /etc/exports is
Code:
/mnt/dvd *(ro)
I thought this might be a firewall problem, but it persists even if I turn firewalls off on both machines (client as well as server.) Also, doing
Code:
ssh 192.168.0.105
is OK, so what is wrong with the route?
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try. Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
I now tried
Code:
mount 192.168.0.105:/mnt/dvd -t nfs4 /tmp/scaleo
and it seems the mount succeeded. So, instead of nfs, one must write nfs4?
Have someone used Linux heartbeat to send email when the Slave server becomes the Master? I've read I can configure the MailTo under.
But I really don't know how to do it. I basically need my primary server to send an email when it becomes inactive and all the activities are manage by the secondary node.
is there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies View RelatedI'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
I am using fedora 14..i wanna create webservice in fedora 14...i am able to create sevice in server machine...but the client not able to get service from the server.it shows an error an i/o error has occured.no route to host.....we checked the ip address and port...i am able to ping the server...its connecting ...but it shows this error...?
View 1 Replies View RelatedI'm trying to set up a basic smtp server on my local computer that I can send basic, unencrypted email through on port 25. I installed postfix, and I chose the following options:
Internet Site,
System Mail Name: localhost
Root and postmaster mail recipient: I left this blank
For other domains to accept mail, I entered : NONE, localhost
No force synchronous mail updates
Local networks: 127.0.0.0/8
[Code].....
I use linux.
I have below error, no route to host.
At nfs client end unable to mount nfs server.
mount: mount to NFS server '10.7.70.178' failed: System Error: No route to host.
i wanaa to config tlenet server and did the steps to enable it
but when i try to connect to server this error show :
telnet : connect to address 10.0.0.100 : No route to host
telnet : Unable to connect to remote host : No route to host
[URL]
I have 3 computers on a local home network. Computer 1 is not receiving incoming anything from other computers on the network, and I don't know why. The regular internet works fine.
Computer 1 can ping and ssh into either 2 or 3. 2 can ping and ssh into 3 and vice versa. But nothing can ping OR ssh into 1. Trying to do so says "no route to host".
All computers are running Ubuntu Karmic.
I have a server that I can ping, and I can connect remotely with ssh to it. But when I try to connect to apache (port 80) I get "no route to host". But I can connect to localhost It's not just my client system that is having this problem but also systems that are on the same subnet There is no firewall running on the server route on the server
[Code]...
We have a Red Hat Linux server that sends email out daily. It points to and Exchange server for smtp. It works fine, however, at least once a day, an email will fail and in the maillog I see "No route to host". After a few minutes, everything is working fine. The Linux server and Exchange are on the same VLAN and IP subnet.
View 2 Replies View RelatedIt has been years since I had to mess with sendmail (I prefer using postfix) - but I inherited a server that someone else configured. This machine is a webserver - but is running sendmail for the various webforms, etc. I want to configure sendmail on this machine to route ALL outgoing messages to the main email server. This means local users too. I have read through sendmail configurations for the past 3 hours, but it's mostly greek. Here is my current sendmail.mc file - could some kind soul tell me what I need to change (and WHERE)?
[code]...
I have two system, an Intel Core2 Duo system running the 32-bit version of Fedora 12, and a MacBook Pro running the 64-bit version of Fedora 12. I'm using the Gnome desktop on each system. I have enabled all the services I believe are necessary to support NFS including nfs, rpcbind, rpcgssd, rpcidmapd, and rpcsvcgssd on each system. I have added an entry to my /etc/exports file to export my home on each system, and if I type this command:
$ showmount -e localhost
I get a result like this:
Export list for localhost:
/home/tron 192.168.200.101,192.168.200.100
However when I issue this type of command:
$ showmount -e <remote host name>
I get this kind of result: rpc mount export: RPC: Unable to receive; errno = No route to host Research on the Internet indicates this is usually due to a firewall problem. However, I use the Firewall Configuration application to the disable the firewall on both systems, and I continue to get the same result. What is needed so I can get this two machines to display their exported file shares remotely? It turns out I did not disable the firewall when I thought I had. Now that I'm certain the firewall is disabled on both systems, I'm able to get the showmount command to succeed.
I have 3 computers on a local home network. Computer 1 is not receiving incoming anything from other computers on the network, and I don't know why. The regular internet works fine. Computer 1 can ping and ssh into either 2 or 3. 2 can ping and ssh into 3 and vice versa. But nothing can ping OR ssh into 1. Trying to do so says "no route to host". All computers are running Ubuntu Karmic. I don't even know where to start figuring out what's causing this, but it's probably something simple. I'm using the IPs I found listed in my wireless router's web-based control panel.
View 9 Replies View RelatedI have two system, an Intel Core2 Duo system running the 32-bit version of Fedora 12, and a MacBook Pro running the 64-bit version of Fedora 12.
I'm using the Gnome desktop on each system. I have enabled all the services I believe are necessary to support NFS including nfs, rpcbind, rpcgssd, rpcidmapd, and rpcsvcgssd on each system.
I have added an entry to my /etc/exports file to export my home on each system, and if I type this command:
$ showmount -e localhost
I get a result like this: Export list for localhost: /home/tron 192.168.200.101,192.168.200.100
However when I issue this type of command: $ showmount -e <remote host name>
I get this kind of result: rpc mount export: RPC: Unable to receive; errno = No route to host
Research on the Internet indicates this is usually due to a firewall problem. However, I use the Firewall Configuration application to the disable the firewall on both systems, and I continue to get the same result.
What is needed so I can get this two machines to display their exported file shares remotely?
I am attempting to run apache on my linux router while connected to a VPN. My default route is set to the VPN endpoint and I cannot control port forwarding at that end. I cannot seem to connect to any service that i bind to the eth0 interface. I believe that my iptables rules and OpenVPN are the source of the problem.
/sbin/iptables -t nat -A POSTROUTING -o tun1 -j MASQUERADE
/sbin/iptables -A FORWARD -i tun1 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
/sbin/iptables -A FORWARD -i eth1 -o tun1 -j ACCEPT
I have recently set up two machines with F14 and on both, I am completely unable to make remote login via SSH work. openssh-server is installed and seems to work well:
I have already worked for hours on the problem now, using Google and trying numerous things, and still could not find any solution. On my other machine, which still uses F13, remote login works just fine. Is there any change in the default behaviour of the sshd I am not aware of? I would really appreciate your assistance!
I have a linux router with 2 physical ISPs and a VPN tunnel that all my traffic passes through. I would like to setup a rule to redirect all traffic from one internal IP address (10.0.0.x) through the physical link only. My current script is as follows.
iptables -F
iptables -X
echo 1 > /proc/sys/net/ipv4/ip_forward
[code]....
My goal is to do something similar to the mangle on the tor traffic, but for an entire host.