General :: FOG: Cant Register Host's On The FOG Server
Jul 8, 2011
Im going to registrate a Host on the fog server database.
i have done this befor on a working system befor, so i kinda know how to do it.
Im booting from the network, and im finding the server, and chose Quick host registation ( i have tryed the full host registration, but it dose not work there either)
after the Quick host registration and loading, this show's up:
Loading fog/kernel/bzimage......
decompressing linux .... Parsing ELF......Done
Booting the kernel.init.gz....
pci 0000:23:00.1: BAR 6: no parent found for of device [0xffff8000-0xffffffff]
unable to query synaptics hardware.
[Code]....
View 1 Replies
ADVERTISEMENT
Jul 29, 2011
My organization is running a VMware vSphere based platform. On top of that we have a Sun Gridengine cluster consists of a number of ubuntu VMs.At the moment, we deploy new cluster nodes from the VM template. Although it already saves us lots of time, we still need to configure the network, host name, register DNS record manually.In a near future, we will need to add 100+ more hosts to the cluster. So we are seeking a automated deployment so that a VM does the following during its first boot:
1)configure the network for the correct IP with DHCP or manual.
2)request a designate host name (maybe from a pre-defined datasource?) and configure host name.
3)register itself to our DNS servers.
We don't really have experiences for running big cluster. So welcome to share your opinions and experiences.Specially I'd very keen to find out if there is any well-proven solution right there or I will need to implement from the scratch.
View 7 Replies
View Related
Sep 8, 2009
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
View 2 Replies
View Related
Aug 23, 2010
I'm a newbie to Linux and need some help in DHCP client configuration.
I'm trying to find a way to set hostname at the start up and get the DHCP client to register itself after it received an IP address.
View 2 Replies
View Related
Feb 12, 2010
This is my quest: i need to install a box with a proxy server where useres can login, register what those users have been doing on-line and generate a dailly activaty report... I have been googleing for days and so far a tried out zeroshell (no reports) and untangle (no login)...
View 6 Replies
View Related
Aug 23, 2010
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
View 6 Replies
View Related
Aug 10, 2009
I would like to register the Vmware ESX server in Redhat Network.
Is this possible? Because there are no commands like rhn_register to proceed further for the registration process?
View 1 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
Jul 10, 2010
I've been struggling this morning trying to associate an application with a custom protocol, namely emacsclient and org-protocol.
I'm calling this protocol from a webbrowser bookmarklet, and I get the following behaviour :
In chromium, the "Launch Application" dialog comes up, and calls xdg-open org-protocol://... which ends up firing a new chromium frame.
In firefox, I've tried setting network.protocol-handler.app.org-protocol to an empty string or my emacsclient path, anyhow I get the following error message : "Firefox doesn't know how to open this address, because the protocol (org-protocol) isn't associated with any program" without even showing any external application selection dialog.
I'm not using any desktop environment, so I need to make this work strictly with xdg, however, despite reading the shared mime info spec etc, I still can't fathom a working configuration.
View 2 Replies
View Related
Apr 19, 2011
How i will register to RHN so that all of my softwares will be updated by it
View 2 Replies
View Related
Oct 31, 2010
I can now read, write and format a floppy disk. Score! [It only takes three separate command line instruction to unmount the drive, format, remount specifying the filing system but what the heck I can do it Now I need USB flash drive to be accessible in Slackware. Otherwise I cant get apps and multi-media data across (without great grief anyway) to test the functionality of KDE.
Gads this is hard work! There is no difference in the operation of Linux than UNIX at university in 1989! Now I see why Im seeing all these adverts for work out east saying Experience in Linux installation essential. Linux requires a wad more work than Windows, MacOS, DOS or even CP/M! You really *can* make a living out of this!
View 5 Replies
View Related
Jan 13, 2010
I have a FTP server (vsftpd) setuped on a Linux box (Ubuntu server). When I try to connect with a computer on the same network everything works fine as expected.But as soon the IP is external it won't connect..I first assumed the port was blocked, but then:localserver:$ sudo tail -f /var/log/vsftpd.logWed Jan 13 14:21:17 2010 [pid 2407] CONNECT: Client "xxx.xxx.107.4"remotemachine:$ netcat svn-motion.no-ip.biz 21220 FTP ServerAnd it hangs there. Do any ports other than 21 need to be open?
View 2 Replies
View Related
Oct 14, 2010
I'm new to using a BIND DNS server. I currently have one set as a master zone on my LAN. My question is how can I add a record for my local lan that will resolve without typing in the FQDN? For example I want to be able to type "server" instead of "server.domain.com".
View 6 Replies
View Related
May 13, 2011
Im setting up my initial server on rackspace hosting and im not sure which server to pick.I plan to run a wordpress driven image blog.Mainly what i would like to know is which server is best for my application & why.
View 12 Replies
View Related
Oct 20, 2010
I have two servers, one has an empty / and the other has a subdirectory with a large number (4 gig) with many, many files. I need a way to transfer the files en masse from the server with the large number of files to the one that is essentially blank.I don't have space on the used host to simply gzip all the files. I've googled this and see that there may be some combination of tar and/or gzip that will let me do this with some sort of redirection.
I really need and example line of how this can be accomplished. If my explanation seems rather sparse, I can supply more details.
View 3 Replies
View Related
Mar 9, 2011
I'm trying to ssh from my laptop to my desktop (both fedora 14) over a local network. I can ping my desktop and get responses, but if I ssh to it, I receive
ssh: connect to host 192.168.100.xxx port 22: No route to host
I can ssh from the desktop to itself.
View 4 Replies
View Related
Oct 20, 2010
HOW TO GET THE IP ADDRESS OF HOST IN LINUX WITH USING OF HOST AND NSLOOKUP COMMAND and after getting the ip address how to assign it in the variable
View 4 Replies
View Related
Jul 27, 2011
Will there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
View 2 Replies
View Related
May 23, 2011
I am trying to monitorize an OpenWRT (Backfire 10.03, r23115) router from an Ubuntu server, but I am having some problems. I have installed Nrpe (2.12) on the remote host (OpenWRT), I have executed the program as a deamon (/usr/sbin/nrpe -d) but when I start the NRPE deamon, I don't get anything about NRPE executing netstat -at or ps -ef.I would need to install check_nrpe on OpenWRT to find out if NRPE is working, but I can't find any ipk package with it. Now, once in the monitoring host when I try to reach the remote host from the server:
/usr/local/nagios/libexec/check_nrpe -H ip_remote_host
I get: Connection refused by host
Even, trying with localhost:
/usr/local/nagios/libexec/check_nrpe -H localhost
I get the same error: Connection refused by host
I have installed Nagios Plugins and the check_nrpe plugin. I have edited the /etc/nrpe.cfg file:
allowed_hosts=127.0.0.1 ip_server
I don't exactly know if it is remote host's fault, monitoring host's fault or both.
View 14 Replies
View Related
Nov 15, 2010
command to show the luns mapped to redhat enterprise server 6.1 host. And how do i known the WWNN for the FC HBA attach to the host.
View 6 Replies
View Related
Aug 5, 2009
What do host.allow and host.deny do exactly? what are they??
View 3 Replies
View Related
Oct 15, 2009
Wanting to join my CentOS5.3 to a windows 2003 active directory. Configured kerberos and samba.
Code:
[libdefaults]
default_realm = domain
dns_lookup_realm = false
[code].....
View 5 Replies
View Related
Jun 9, 2011
I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
View 3 Replies
View Related
Jul 19, 2009
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
View 1 Replies
View Related
Apr 17, 2010
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
View 10 Replies
View Related
Jun 10, 2011
Has anyone had any experience on using SUA(Services for UNIX Applications) rsync to "pull" files down to the Win2k3R2 server from a linux rsync host?I was trying to use cygwin rsync before until I found out from cygwin that the cygwin port of rsync was "flakey" and would fail intermittently for no apparent reason. cygwin suggested I use SUA or SFU for rsync services.
I've looked for/ am looking for any experience using SUA rsync to copy files down from a linux rsync host to the Windows host via rsync on the Windows host. Also, if you have done this successfully, do you have any pointers/caveats you can share on how you got it working? What I am basically looking to do is copy files and subdirectories of files from a linux host using rsync to some static location on a Windows server on a scheduled basis so that I can backup the windows server to tape using Symantec's Backup Exec application.
I'm doing it this way to avoid deploying the Remote Agents for either linux or Windows on the target hosts. As an alternative I've seen reference to a product called DeltaCopy that uses a native Windows rsync port with the native linux port of rsync to do what I need also.I realize this is not a strictly linux question, but more of a hybrid as I'm moving data to and from Windows and linux hosts. So, if this is too Windows-y a question, please say so and I'll withdraw my question.
View 2 Replies
View Related
Jan 15, 2011
When I try to connect to my SUSE server from other one this appears: Remote host identification has changed. I deleted entry in know_hosts but it still working wrong, showing me this message. What could be the cause of this problem??
View 1 Replies
View Related
Jan 9, 2010
If I start Ubuntu One from Application->Internet, the icon appears in my panel with a red-background X. I tried typing 'u1sync --authorize' from a terminal, but it just hangs and nothing happens with my web browser (Firefox). I've created the LaunchPad account, but I've never been offered an 'add this computer' button in the browser. So it's impossible for me to authorize this computer
View 1 Replies
View Related
Mar 18, 2010
I try to register in kubuntuforums.net but I can't. It make makesme questions and still I answered it said me that I was wrong.I don't know how to answer. Maybe is letter in place of numbers,maybe...Well, it's the first time that I can not register in a forum andit's sad because I have booth desktop Ubuntu and Kubuntu.
View 6 Replies
View Related
Jun 11, 2010
So I've created my pgp key and attempted to load it to the keyserver only to get the error as shown. This is the situation for 2 days now. Is there a workaround or fix?
View 1 Replies
View Related
