I'm having some issues with getting compiz to work properly. I've installed it from the software center, but i dont think its loading right, because compositing / transparency is turned off, now my windows have little black lines and corners where there would typically be transparency. how to get this working again, whenever i open the ccsm thing, the title bars go away.
View 9 RepliesI have extra visual effects enabled on Ubuntu and whenever I start programs they always open in the top-right corner of my screen. Is there any way to change this?
View 2 Replies View RelatedI've just installed Kubuntu 11.04, switched on wobbly windows effect. It runs very smooth on my Nvidia GeForce 7600 GS with dual screen twinview turned on. However, I get these lines when I drag/move the window upwards - see screenshot:
View 6 Replies View Relatedwhenever I open system monitor, I just get a loada black and white lines, I have no idea what this is, this never comes for any other application/program and it stops me from being able to kill non-responding processes.
View 6 Replies View Relatedi have an dedll inspiron 8600 laptop. i just installed the new ubuntu, 11.0.4 i think. i installed from a usb. in the installation i wiped the whole drive with no partitions. i booted it while connected to the Internet and it loaded updates as it went. as far i know, everything went just as it was supposed to. the new os seems to be behaving just as it should.
however, (always a catch, right?) now, the right third of my screen appears to have thin black Phoenician blinds from top to bottom.
i can still partially see the icons in the top right corner, but not well enough to use them really, but they are active. i tried rebooting, but it didn't help.
i promised my girlfriend that this would make our dog poo machine run great and we could get more work done faster. i really hope i didn't make a mistake. the dog house gets me claustrophobic.
Trying to enable transparency in konsole theme , and its warning me I have no such support for such things atm, and wondering how I enable this ?
View 2 Replies View RelatedIf possible I'd like to have the translucent/transparent windows that Windows 7 has, on CentOS. Is this possible and if so, how?
View 6 Replies View RelatedOperating System: Ubuntu 9.04
Printer: LaserJet CM1312 MFP
I have an intermittent printing issue that results in part of a printed page containing a horizontal line that spans over two lines. The line is mostly black, with the occasional small break where there seem to be printed multiple characters printed over each other.
Sometimes I print and I do not get this issue. Other times I can print 60+ pages and it happens, while sometimes I get it on a single page being printed.
I'm not sure if this is a driver, printer or cable issue. We've used it through CUPS and we've used a print hub to convert the USB to a network accessible printer to see if that made any difference but it did not.
I have a feeling this has something to do with the print job data corruption.
I wanted to get rid of ubuntu splash screen, and edited the line GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash text". Now it won't load at all. It nust shows the same purple background without ubuntu logo, then turns black and shows few lines of text. After displaying "Checking battery state... [OK]", it freezes and does not move further. I can't even.start a recovery mode because I have no dual boot and do not get this opfion at the start.
View 7 Replies View Relatedi just installed slackware 13.37 which worked fine but when i boot it up it runs a number of lines and then the screen just goes black... i can login as root blindly and start x (i THINK, judging from hdd led)... but screen stays black... its a laptop and closing/opening the lid doesnt work either...
i am dualbooting with slack 13.1 which runs fine... it switches screen res at some point during boot (font is smaller) and i would say that is the point where the screen goes black in 13.37...
I don't seem to have an "xorg.conf" file.
Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.
I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)
EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288
Mandriva 2010.0 / HP Color LaserJet CP 1515nUsing HP's own Linux drivers over CUPS or HPLIP.Whenever I print, black lines occur whenever there's a line break. This doesn't occur with the test page, but with any document printed (text, OpenOffice, webpage, Thunderbird email).Here are scans (600px high JPEG) of three recent printouts:EmailWebsiteText documentTest PageHere's the CUPS config:
Description:HP_Color_LaserJet_CP1515n
Location:
Driver:HP Color LaserJet cp1515n pcl3, hpcups 3.9.12 (color)
[code]....
Downloaded the F10 live CD. Booted to it, got past the white, blue, and dark blue loading bar then my screen would be covered in black and white lines. No sign of the GUI except for a mouse cursor. ctrl+alt+backspace would cause the display to blink off and then come back on to the same thing. ctrl+alt+f2 would bring me to a terminal, logged in as root, but from there I couldn't do anything. startx would tell me I had x running on another screen.
hitting tab when booting the livecd and adding "xdriver=vesa" and "nomodeset" to the boot line. That works. I get to the desktop at native res with desktop effects. Killer. I tried to install; install went flawless, rebooted to my HDD and the same issue, black and white bars. When booted to my HDD, however, ctrl+alt+f2 doesn't bring me to a terminal, it causes my monitor to go into sleep mode and my computer becomes unresponsive so I can't do anything from the command line.
Here's what I'm getting at : how do I get my installed version of F10 to do the "xdriver=vesa" and "nomodeset" args that the livecd can do?
My machine is a home built machine I bought off of a friend. P4 2.4 ghz, GB RAM, 2 80GB HDDs, Radeon x1600.
I have an HP Printer which prints black horizontal lines after each line or colors an entire blank line black, so a blank page will come out all black. Others who have access to the Printer are able to print well, without any problem.
View 1 Replies View RelatedEver since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
View 2 Replies View RelatedIt is bothersome, how do I fix this?
View 5 Replies View Relatedjust can't find the answer for this one (after Google and these forums) So I want to configure my Synaptics touchpad in this fashion:
Code:
synclient RTCornerButton=8 RBCornerButton=10 LTCornerButton=11 LBCornerButton=12 FastTaps=1 This line of code does what it's intended of it. However, the changes made don't really stick after a system reboot.I'll explain:
So, the "FastTaps" part works flawlessly (as intended). However, the corners bit doesn't work after system reboot!...and weird enough, if I set up a start up script with that bit of code on it it'll only remap the last two corners (LT and LB), because RT and RB always get automatically set to "2" and "3". It's obvious then that those corners are getting remaped somewhere I haven't found yet. I've already tried ppa:yurivkhan/ppa and adding new options to "usr/lib/X11/xorg.conf.d/10-synaptics.conf" to no avail either. how to make the remap of touchpad corners permanent? P.S. - I'm using Ubuntu 10.04 LTS with Macbuntu.
I have a pull-down corner on both of my gnome-panels. If I hover my mouse over it, i even get the resize cursor, but you can't actually resize the panel. I'm also seeing them on my screenlets. See the shot below:
The pull-down corners are in the red boxes. It's very clear in the top box on the gnome-panel; it's a little harder to see in the bottom one on the weather screenlet, but it's there. I have a bottom gnome-panel, too, and it's on that one, as well. I just recently noticed them, but I'm not sure where they came from. Does anyone know how to get rid of them? It's not really causing any problems. It just bothers me because I'm a bit of a perfectionist. I've tried searching the web and the forums for a solution but I'm having a hard time finding anything because I don't know the official name for that design element.
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
Pressing left, middle and right button of mouse at bottom and right edges or bottom left, top right and bottom right corners of the screen does not work with fittstool-2.0 on openbox in debian jessie with dual monitor.
Pressing left, middle and right button of mouse at top and left edges and top-left corner on the screen works correctly.
I use openbox on debian jessie. I do not install any desktop environment explicitly.
In the jessie, I installed gcc, make, libglib2.0-0, pkg-config, libcairo2-dev and libxcb1-dev.
I downloaded [URL] .... and confirmed that the sha1sum value of the downloaded file matches sha1sum value given at [URL] ....
I expanded the downloaded file by
Code: Select alltar -xvf fittstool-2.0.tar.gz
into fittstool-2.0 directory.
I executed with an ordinary (non-root) user:
Code: Select allcd fittstool-2.0
make
I executed with root privilege on the fittstool-2.0 directory
Code: Select allmake install
I executed the following with the ordinary user:
Code: Select allfittstool
and ~/.config/fittstool/fittstoolrc was generated.
I modified it as
Code: Select all[TopLeft]
LeftButton=gnome-terminal
MiddleButton=pcmanfm
RightButton=iceweasel
[Code] ....
gives:
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192
VGA1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 408mm x 306mm
1600x1200 60.00 +
1280x1024 75.02* 60.02
1280x960 75.04 60.00
1152x864 75.00
1024x768 85.00 75.08 70.07 60.00
832x624 74.55
800x600 85.06 72.19 75.00 60.32 56.25
640x480 85.01 75.00 72.81 66.67 60.00
720x400 70.08
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.02*+
1280x960 60.00
1152x864 75.00
1024x768 75.08 70.07 60.00
800x600 72.19 75.00 60.32
640x480 75.00 72.81 60.00
720x400 70.08
DP1 disconnected (normal left inverted right x axis y axis)
So I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
I have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:
[Code]...
How do you remove parts of strings using python? Such as, if I have something like:
Code:
erme1 sdifskenklsd
erme2 sdfjksliel
[code]....
I've come across an unusual requirement for a service in my Ubuntu system.Simply put, I need to find a way to search for all instances of a term in a file, delete lines containing containing that term, and delete four lines below each instance of that term. ither that, or copy the entirety of a file to a new file and skip over all lines containing the term plus four below it.This sounds kinda weird, I know. Without going too far into detail, I either have to change the logfile format for a server I'm running which is a huge pain in the butt, or I can just run a script to edit an HTML report generated from said logs. (Said report is really just for managers to peruse, and I like my log format, so I'm pursuing option 2.)
View 4 Replies View RelatedI m relatively new to Ubuntu and although I am very aducuate with computers it self (technology studie; modding, scripting and programming) I found a truly atrocious bug that ****s up Gnome (I assume). Here is a screenshot: [URL] The install is from one month ago, and since then i upgrades to 10.04. I never did any unusual stuff as far as I know. I added a few private repositoryś (playdeb, Virtualbox and some PPA?s) and configurated Compiz so it?s good to impress my class mates. This all is installed on a HP Pavilion DV6 with a Ati Graphics card and proprietary drivers.
it's some very simple thing that you can spell out for me cause I'm not in a great deal of time fixing this ****. Considering I nead this PC for school: it must work. Booting in windows would be a sign of weakness towards my classmates and it's no good advertising for linux in general.
Even though the windows look pretty good, I would love to put them back to regular white. I don't know why they are black, or how to fix them. The picture should show what i mean.
View 2 Replies View RelatedI quite haven't figured out exactly when this happens, but it seems it happens after I connect an external monitor after logging, instead of logging in with the monitor plugged in. What happens is that every new window including popups become black. It seems if I turn off the desktop effects it goes away. I'm using T500 with intel graphics, and tumbleweed with KDE 4.7
View 6 Replies View RelatedI recently decided to buy a new pc and install only one operating system: Debian.
The PC has an Intel Core 2 Duo, 4GB of RAM and installed Linux 3.16.0-4-amd64 with desktop KDE SC 4.14.2
I can use it for a while, but it always ends with the same problem: All the windows turn black, except the edge.
Furthermore, in the application launcher menu, the edge only appears, like when I make right click on the desktop.
They appear completely transparent. Only be solved by restarting the PC.
I am using OpenSuse 11.4 (64 bits) with KDE 4.6.0. My graphic card is nVidia Ge Force 6150 LE with the nVidia proprietary 2D driver (called "nVidia" on the system information page).
A strange graphic behaviour occurs until a few days: when an application (eg Firefox) is already running and when I try to open another application (eg Thunderbird or Dolphin), the associated window is completely black except the upper bar mentioning the name of the application. It seems that this problem occurs only when an application is already running with its window displayed. It is necessary to close this application in order to run correctly another one. It is impossible to run correctly more than one application.
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.