Ubuntu :: Windows 7 Not Detected By Grub?
Jan 25, 2011
I recently installed ubuntu in my dell inspiron n series, after installation only ubuntu is in grub configuration. Windows is not detected by grub. Here is what i get if i do fdisk -l
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 8 Replies
ADVERTISEMENT
Aug 20, 2010
I've got 2 HDDs. Ubuntu 10.04 is installed on the first and Windows on the second. But Windows is only on a small partition for special cases. Therefore I don't want that Windows to be included in GRUB whenever the kernel is updated or whenever I run update-grub. If I really want to start Windows, I am able to do so via a menu from BIOS.Is it possible to permanently exclude Windows from grub or disable GRUB's autosearching for other operating systems?
View 2 Replies
View Related
Jul 10, 2011
i'm currently using ubuntu10.10(/dev/sda10) and win 7 is installed on /dev/sda1.
during installation of ubuntu bootloader failed to install.so i had to do it manually later.but now the problem is that is does not recognise my win7 os.
i have tried many different suggestions given on this and many other forums but none worked.i even tried going back to grub(legacy) but that to didn't help.editing the menu.lst didn't work nor did the sudo update-grub did.
i also used the boot_info_script.it detects my win7 partition.if u want i'll attach it here.
View 8 Replies
View Related
Jul 18, 2011
I have installed Windows 98 and Debian together before. This time however I started to run into trouble from the start. There was a Win XP and Debian installation left-over, but I had made considerable changes to the hardware, so I decided to format and create new partitions (Parted). The Wind 98 installer didn't like that, and eventually, I cleared the disk with Parted and used Fdisk. When I installed Debian, it couldn't find my Win 98 installation, but I thought it would be easier to add it to Grub with a working Linux, than installing Grub via Win 98/DOS. Debian starts up fine. Windows partition visible, and I believe correct. I could use Win 98 before I installed LinuxInformation I've found so far:I think I need to add this (somewhere?):
Code:
menuentry "Windows" {
insmod chain
[code]...
View 10 Replies
View Related
Jul 6, 2010
I would like to dual boot Ubuntu 10.04 and Fedora 13. I have 20 GB set aside for Fedora and Ubuntu is already installed. I know that I need to not install the boot loader in Fedora (GRUB) and I have done that. Fedora is not detected in my grub from Ubuntu. How to I get Fedora to be detected by Grub. Do I need to reinstall Fedora? Also, I deleted Windows, but my grub still has Visa on the boot menu.
View 9 Replies
View Related
Aug 6, 2010
I'm a Linux noob, so please go easy on me! I've been desperate to get rid of my Windows install for a while now and have finally started to make the move over, but have a problem with my Ubuntu 10.04 install. I've scoured the help documentation and forum for days now without managing to resolve my problem, and have finally resorted to posting my problem. So I'm sorry if this has been covered elsewhere.
1 Installed Ubuntu on my laptop (Viglen Furtura S200) but the only way I have been able to get it to install and boot properly is edit the GRUB with the following acpi=off i915.modeset xforcevesa. I had to add these parameters even to boot the live CD as well. I think I'm right in assuming that this is forcing the use of a generic graphics driver, consequently leaving some visual features unavailable. I'm not really sure what turning acpi off is doing. Is it possible to resolve this? Is this the cause of problem number 2?
2 After install there is no sound. Sound preferences shows no hardware and ALSAmixer is empty when opened. I have followed the sound troubleshooting through and it looks like my sound card is actually being picked up on the board, but I fall at the point of checking the loaded ALSA Modules as my report shows that none are loaded?!
View 5 Replies
View Related
Dec 24, 2010
I have installed ubuntu and Centos 5 , but when i do sudo update-grub , the new centos 5 is not detected. Some days ago i did the same (i installed ubuntu , and then Centos 5) , but i had to format the hard disk because some problems i had. The thing is that in that first time update-grub worked , but now not , why? Shouldn't be detected this time too? I have to manually add the new entry to the grub no?
View 4 Replies
View Related
Dec 20, 2010
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
View 9 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Jun 1, 2010
So I have a Samsung monitor at work (model 2343BWX) that I use in addition to my laptop screen. My computer is a T500 think pad. When I boot into ubuntu 10.04 from previously shutting down the computer in ubuntu I can't detect the monitor. If I however boot first into windows (I don't even have to enter my password, I can just press shutdown on the menu instead of logging in, and then boot into ubuntu) and it auto detects the monitor.
I have tried going to System -> Preferences Monitors and clicking "Detect Monitors" it doesn't work. Anyone know how this could be?
View 2 Replies
View Related
May 27, 2011
When I try to install Ubuntu 11.04 ( Not using WUBI ).. My already present OS Windows 7 is not being detected. More over I get two options,
1)Erase the disk and install
2)Specify the partitions
When I try to specify the partitions, my hard disk is shown.. but my 4 partitions are not visible.
View 9 Replies
View Related
Jul 23, 2011
i had windows 7 pre-installed in my laptop. i installed ubuntu 11.04 by making a bootable disk and did the partitioning so that both windows and ubuntu boot options would come on startup. however , when i switch on the laptop . the options do not come and ubuntu boots as if it is the default. i thought this might be due to a problem with grub 2 so i re-installed it. yet there was no difference. i want to uninstall ubuntu now. but how do it? most guides require me to access windows and create a rescue disk and changing the MBR. but since i cant access my windows partition this isnt an option. so there are 2 options for me - to make grub detect windows during boot and then use windows to make the MBR rite or to delete the system files of ubuntu to make it unbootable?
View 3 Replies
View Related
Apr 22, 2010
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
View 9 Replies
View Related
Aug 24, 2010
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
View 4 Replies
View Related
May 24, 2010
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies
View Related
Dec 16, 2010
I have installed ubuntu in my windows vista using wubi. Wireless isn't working in ubuntu, so I have to install Broadcom STA proprietary wireless driver and it works fine in ubuntu. when I reboot into windows, to my shock, hardware isn't been recognised in windows. This is not first time I experienced it. I had same problem when i installed nvidia drivers on another dell precision. Its graphics got screwed and never been recovered. I tried re installing windows but problem still persists.
View 1 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Apr 5, 2011
when i check disk partition in ubuntu 9.04
using #fdisk -l.my friend show me like this.i have 4 hard disks, but he didn't.. but only 3.Was there anything wrong? when i installed linux and maked config?(e.g> i have miss on setting disk partition matter) and when see below result, the device sda2, sda5 start same address, end too.is there anything wrong with my disk? i have seperated 4disks.. C:,D:, G:,H:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xe9ffe9ff[code].....
View 1 Replies
View Related
Mar 8, 2011
for some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.
before I deleted it, I recall it saying something about the backend had failed?
View 1 Replies
View Related
Apr 23, 2011
I'm using Maverick Meerkat, 10.10, 64bit. I'm a pretty basic user but am trying my best to learn.
My background: I have a laptop on which I installed Win7 Ulimate on one partition. After installing Win7 I then installed Ubuntu on a separate partition. GRUB2 found both Win7 and Ubuntu perfectly. I could choose to boot into either one and the ability for GRUB2 to "remember" which OS I booted into last worked properly. I then did a kernel update a couple days ago via Ubuntu's Update Manager. After that, GRUB2 could no longer see Win7. I added a custom boot entry in /etc/grub.d/ so that Win7 would show up in GRUB2.
However once Win7 did show up in GRUB2 I kept having a problem with the Windows bootloader being missing. I used the Win7 Recovery DVD to get into Windows and then installed EasyBCD for Win in which I was able to create a Win7 boot entry and get the Win7 bootloader back. I set EasyBCD to skip the bootmenu so my current configuration now is that on bootup I see GRUB2, which shows Maverick Meerkat & Win7. If I select Win7 then Win7 loads via EasyBCD and it works fine.
The problem though is that GRUB2 does not auto-detect Win7 AND it no longer remembers the last OS that I booted into. I would rather not use EasyBCD if I can help it and would like to just use GRUB2 for everything.
My question is this: How can I get GRUB2 back to controlling Ubuntu & Win7 properly without the need for anything else in between. I have asked in the Freenode Ubuntu channel but haven't received any help besides "sudo update-grub" which I have done and it hasn't helped.
View 9 Replies
View Related
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
View Related
Jan 9, 2010
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Jan 1, 2010
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order:
sda1: Windows 7 (can't boot into)
sda8: ubuntu (gets erased)
sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
View 9 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
Jul 2, 2011
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
View 9 Replies
View Related
Sep 11, 2010
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
May 16, 2011
When i turn on my laptop the dell logo comes up, and then it goes to the Windows black "grub" (i have ubuntu and 7), if i click on "Windows 7" it starts, but if i click on "Ubuntu 11.04" it goes to the nice and purple grub that we all know, and i also have two options: Ubuntu or windows. It seems stupid and pointless to have 2 grubs.Is there any way to uninstall Window's black grub so the computer will go direct to Ubuntu's purple grub?
View 9 Replies
View Related
