i resently bought HCL ME with windows, i formatted and installed Ubuntu netbook version. i am getting wifi is not connection it looks disabled in network place. my network controller is Realtek semiconductor co., ltd rtl8191sevb rev 10, i am unable to get this driver to install can anyone help me ?
View 2 Replies
[Ubuntu 9.10]
I was using my usb Alfa AWUS036H-v5 usb wifi card, and then after I rebooted, it randomly stopped working.. did some searching on the site, one idea was to do
Code:
sudo lshw -C network
which I did, and it shows my internal wifi card (iwl3945) working fine, but says my wlan7 (Alfa usb) as:
network* Disabled
Also, in the upper right hand corner, the antenna is greyed out and says "Device Not Ready"
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies View RelatedI've tried to configure :
- a wired network
- a wireless network
- a mobile broadband network as both "system connection" and "automatic connection".
I need to have a laptop that will try to connect as sson as I plug the ethernet cable in or as soon as it senses a certain SSID or as soon as there's a mobile broadband device plugged into a USB port. Non-system connections are working but I am not willing the actual user (non-admin) to read the WPA2 key or the SIM PIN. But the check box for the system connection is disabled. And running "sudo kcmshell4 --icon networkmanager kcm_networkmanagement kcm_networkmanagement_tray" doesn't result in a system connection.
the laptop disconnected from wifi and the network connection icon on the panel dissapeared... If i restart the laptop will automatically join the wifi nwtwork for a couple mintues and then will go offline.
Hiw can i get the network icon back at least to see it that fixes the problem....
My ubuntu system has been running really well until this morning - software update prompt appeared on the screen, so I ran with it and let it do its thing. A while after this, my WiFi network connection started failing. I've tried rebooting and then it can take up to five minutes or more for the password (keychain) prompt to appear. Once I have typed in the password the network connection starts to work. Then cuts out. Works. Then fails again.
View 3 Replies View RelatedWifi network operated perfectly with f13. Upgrading f13 to f14 did not show any problems except for networking. It seems that the wlan0-link is not ready. Consequently no network information about adresses can be obtained. Tried with network tools to activate wlan0. No reaction Tried to deactivate Networkmanager and bring network up with
service NetworkManager stop
ifconfig -a
Then
ifconfig wlan0 up
dhclient wlan0
No reaction on network. The NetworkManager icon disappears which is understandable.
I have a strange problem that I cannot diagnose -- slow wifi. About two or three weeks ago, I noticed that my wifi began to slow down dramatically. The problem is the same on my ubuntu laptop and my ipad. But when I connect directly to the router with a network cable, my connection is fine. So it is definitely a problem with the wifi signal itself.
What I have done so far:
(1) I checked all of the MAC addresses connected to my wifi. I identified my tivo box, laptop, and ipad. Nothing else.
(2) I used [I]wifi analyzer[I] on my android phone and selected an unused wifi channel (channel 8).
(3) I changed the username/password on my wifi signal. I also changed the password for my router's admin privileges.
(4) I restarted my router and computer.
None of this helped.
I am using a Netgear WGR614 wireless router.
I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
View 3 Replies View RelatedI have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?
View 3 Replies View RelatedI have a problem: when I log in with my account NetworkManager doesn't connect to my home WiFi connection, cause it wait for authorization. No change if I try to retype the connection password, it still wait for authorization!
View 9 Replies View RelatedI have Debian 8.2 with KDE 4.14 and everything runs perfect, except for the internet connection. This problem happens randomly when I turn on my machine. Sometimes when the desktop loads, the connection is already settled.
But sometimes when the desktop loads, the wifi icon is still loading and keeps stuck at "setting network address". Since this problem happens randomly I really don't know what is happening here. My wifi chip is this:
Code: Select all01:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)
This is the problem:
I installed Debian with non-free firmware because of this chip.
root@debian:/etc/network# ifup wlan0
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
[code]...
I loaded Ubuntu 10.10 on a USB stick and when everything is loaded and I try to connect to a network, the notice I get is code...
for my internal wifi adapter and USB adapter. I remember being able to use them in the past with a fresh install of Ubuntu on the same USB stick. What am I missing?
System: Fujitsu-Siemens Amilo Li 2727 Laptop
Wireless: Atheros Wifi chipset
OS: Ubuntu 11.04
I have a problem with the above where I don't see any Wireless networks.
Wireless is enabled from the Network Applet.
I have carried out the following tests and the results are as follows:
Code:
I then tried to unblock using:
Code:
After running the above commands I get this:
Code:
I have checked the adapter and found it to be disabled:
Code:
Other commands I can think of for information that might be useful are below:
Code:
wlan0 Interface doesn't support scanning : Network is down and..
Code:
and
Code:
and
Code:
I want to install ubuntu 10.04 for netbook on my lenovo S10 so first i tryed to see without installing,and when i am trying to access the internet in the wifi icon says "no network connection".
View 2 Replies View RelatedIm using natty in lenovo b460. After installation was not able to connect to wifi. Ethernet is working alright. So searched for additional drivers and installed the Broadcom 43xx drivers. After restart the network applet says the wireless is disabled by hardware switch, even after it is switched on/off several times.
Lenovo B460
kernel:2.6.38-8-generic 32-bit
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
ubuntu 11.04
[Code]...
When connecting to a database in a php script, where would be the safest place to store the connect.php file. I am thinking it should not be in public_html, but is it safe in sub folders or is there a method people generally use to keep such files secure and inaccessible.
The file I mean is one including the database name, user and password etc.
After fixing an issue with sleep mode, my WiFi is automatically disabled on my Ubuntu installation on boot while the switch is on. For some reason, it seems that Ubuntu has an issue communicating with my BIOS. As a fix to this problem: I disabled the C4 sleep state. My Ubuntu installation now boots up fine but the LED on the WiFi indicator glows orange, indicating that it's off; while in Windows it glows blue, indicating that it's on.
View 2 Replies View RelatedI've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View RelatedI decided to wing it and upgrade from 10.04 to 10.10 once I developed odd wireless issues (grrr) where I could only get on wireless if I booted up Ubuntu with my wifi switch DISABLED and then right away enabled it once I was logged in. The funny part is, it distinctly said 10.10 available in update manager. I get it done, power up, System - About Ubuntu - 11.04.
View 4 Replies View RelatedI've just finished installing Jessie and everything went well, however when I boot into the installed system the WiFi option says that the hardware is disabled. My laptop is a Lenovo G50 which doesn't have a physical switch. the odd thing is that during installation I'm able to connect to my wifi with no problem!
View 8 Replies View RelatedPc 1 : netbook with an usb wifi antenna spotted on a free wifi hotspot
Pc 2 : same model netbook that can't access internet
What I need : Share the wifi connection by the 2 internal WLAN on ubuntu by network-manager
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI am using fc14 i686, and I am having a problem with my wireless card. Even though the led of the wireless card lights up the network manager claims that the wireless is disabled. I don't understand what is going wrong.I am a newbie trying to be sth better bur for the time being my only help could be the outputs of the lshw, lspci and lsusb commands.
View 5 Replies View RelatedI had this issue in 9.04, resolved it in 9.10 (it went away on its own), but it's back in 10.04..I currently run my Ubuntu machine as a headless server and connect to it using TightVNC from a Windows computer.However, this connection won't work unless I start the Ubuntu machine with a monitor connected. Once that's done, the remote connection works fine until the Ubuntu machine has to be restarted. Thankfully Linux doesn't need restarting as much as Windows does, but unfortunately, every time I restart (i.e. with a kernel update, which happened at least a half-dozen times with 9.10), I have to plug the monitor in or TightVNC won't be able to connect.
System - Control Centre - Remote Desktop is set to allow remote connections as it should, I haven't altered this on upgrade.It's like it's some sort of graphics issue - if no monitor is detected on startup, disable the GUI completely...the system runs fine in remote terminal mode over putty, it's serving files fine and running the few server apps I have on it, but nothing over TightVNC.
I would like to have ftp access the files on a Linux Server using XP. It's easy with a windows server but Microsoft doesn't work with the Linux server.
View 3 Replies View RelatedI tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
I have an Asus EeePc 1001PX and on resume I have "Network Management disabled", neither wired nor wireless interface can be configured, the NM icon is greyed out. running ifconfig shows eth0 and wlan0 have disappeared completely.
I found 2 options:
1. https://bugs.launchpad.net/ubuntu/+bug/555571
2. Network management disabled after start on 11.2 - openSUSE Forums
but I don't have the /var/lib/NetworkManager folder at all
