I go to places-acces server-ssh and connect to a remote server with Nautilus.All ok.But I prefer to use vifm as my main file manager: I try to find the ssh-mounted devices in /mnt or /media but cannot fin them.Does anybody know where they are?
View 2 RepliesI am trying to copy my /home directory to a separate partition. I have seen a lot of info on this on the internet. Most of the information uses cpio to copy the files. The destination partition has been successfukky mounter.
View 2 Replies View RelatedMy university has a system set up where each class has its own directory for the professors to publish and receive files. These directories reside under a directory in /home which happens to be a mounted disk and are accessible anywhere in the system by referencing ~csXXX where csXXX is a sub-directory within that home directory. How are they doing this and how can I do it on my own systems?
View 2 Replies View RelatedI work on machines with different architectures, all of which share the same home directory(what is the technical term for it -- network mounting ?). Since I don't have admin privileges on these systems, I have installed programs in /home/<my_id>/bin. A program compiled for one architecture doesn't work when I login into another system. I'm thinking of creating architecture specific directories which would contain inaries/libraries specific to that architecture and creating a softlink to it t /home/<my_id>/bin. The only problem with this solution is that I can't work on two systems at the same time.
View 1 Replies View Relatedam new to linux and trying to find a file in sub directories using find command as:find .-name *.jpg -type fBut I am unable to get the result as find command is not permitted by the server administrator.Is there any way to find files without using find command.
View 14 Replies View RelatedI recently started having unusual directories appear on one of my mounted arrays. I did not create them (intentionally) and I have no clue what they are. They all have the this in the name of the folder "samba_symlink_dir_traversal.nasl-<10-digit number>" they all have the same time-stamp for the date modified column (see pic).
What are these folders? Why are they appearing? And how can I make it stop? It doesn't do this on my other mounted arrays and disks. I recently grew my two attached arrays, this started right after that, but only on one of them. Connection? Also, it may be relevant, the folders are different today in their modified date(reflecting today's date) and the numbers in the name of the folder are different too.
How do you find the device (e.g. /dev/*) for a mounted USB drive in Linux (Ubuntu 10.04)? I'm trying to format a Cruzer USB flash drive, and when I plug it in, the icon for the mounted filesystem appears on my desktop. However, when I open GParted, it doesn't list the filesystem as an option to partition.
The recommendations I've found through Google include monitoring tail -f /var/log/messages, which they claim should list the device name when the drive is mounted, but this never happens for me. I've also read that the USB drive would usually be linked to /dev/sdb, but this appears as a broken link on my filesystem. How else would I find the device?
How do I find out "why" the mounted virtual drive is busy? All windowed programs are closed out. I assume a background program is using the resource? All was fine until about a week ago.
View 9 Replies View RelatedWhen I am in Nautilus, I want to be able to select a directory, then right click (or some other action) to do a file find on that directory. The gnome-search-tool would be a good candidate for this, if it could be an action in Nautilus. I know I can do a file find through other means, but Nautilus seems to be where I am when I want to search directories.
View 6 Replies View Relatedwhat i wanted to do was find all the files with a specific name from a tree, sort them by modification time and have their directory appended to them so that i knew where they were (because they all have the same name). i tried a whole bunch of different things and finally did this:
Code:
find . -type f -name world.sav -exec ls -l '{}' ; > ~/dfsaves.txt; gawk '{$1=""; $2=""; $3=""; $4=""; $5=""; print}' ~/dfsaves.txt | sort -n > ~/dfsavessorted.txt
this did the trick pretty well, but as you can see it is far from elegant and i think i'm doing some things wrong and kludgy
first thing i tried was "ls -lRt | grep world.sav" which worked except i couldnt distinguish the files because there were no directories. that took a lot of looking till i accepted i couldnt make ls print directories as well and append them to the files somehow that their relationship would be clear. i tried piping ls to find, doing it in reverse, passing them from grep etc. etc. until i read some more stuff online that got me using gawk and sort. the questions:
1. is there some other, more elegant and simple way to do this kind of detection and sorting?
2. is there any way to use a pipe after using exec? the semicolon seems to prevent this entirely, forcing me to use an intermediate file as above. i could just remove it later, but i'd prefer a straight piping.
I am trying to exclude 2 directories with find and pass it into cpio. I have tried
Code:
find . -depth -path '.evolution' -prune -o -path '.gconf' -prune -o -print|cpio -aov > /media/caca/full$date
./.gconf/apps/evolution/memos/%gconf.xml
./.gconf/apps/evolution/memos
[Code]....
I'm having problems figuring out the process to find directories that DO NOT contain a certain file. I have a mp3 collection that all the album art is name "folder.jpg". Not all the albums have images. I need a way to find the albums/directories that do not contain "folder.jpg". I can find the ones that do contain "folder.jpg" with
Code:
find . -iname 'folder.jpg' -print0 | xargs -0 ls >> album_art
but that is as far as my bash-fu can take me. I'm not really sure what my next step is.
My directory structure is like such: a-z/artist/album/folder.jpg
i'm trying to make a script that gives one output if a directory in /home is older than one month, and another if the directory is less than one month old. I looked around and saw that the creation date for directories isn't stored, or at least i couldn't find it? How is this possible to do then?
View 2 Replies View RelatedI found a script on webmaster world that mostly does what I need it to, but have been making modifications to tailor it to my specific needs.I know that //..*/ tells awk to ignore hidden directories, how do I define more directories to ignore? (i.e. temp, var, etc)? I've tried playing with prune before the awk command with limited success...I know that there are many ways to do the same thing and keep running into brick walls.
View 11 Replies View RelatedWrite a script to list all the differences between two directories.
View 1 Replies View Relatedhow the "-prune" option works. I've searched quite a bit on line, and as far as I can tell, "-prune" works exactly the opposite as it says.
I'm using Apt-proxy, and I want to scan through the folders, and find files that end with "*.bz2" The problem is that the search takes a while because of all the "*.deb" files. Fortunately, they're stored in their own folder:
/var/cache/apt-proxy/ubuntu
/var/cache/apt-proxy/ubuntu-security
/var/cache/apt-proxy/partner
each have two folders:
[Code]....
this is my fisrt time in this forum. I got the following message when I an using arm-linux-insight: [root@localhost insight]# arm-linux-insight Tk_Init failed: Can't find a usable tk.tcl in the following directories: /usr/local/share/tk8.4 /usr/local/lib/tk8.4 /usr/lib/tk8.4 /usr/local/library /usr/library /usr/tk8.4.1/library /tk8.4.1/library
[Code]...
I've got a simple command that does almost what I want.
The following will locate all files with a suffix of '_compressed.swf' and copy each into its same directory with a '.bak2' appended:
However, I need to replace '_compressed.swf' with '_content.swf' I'd like to use find, rather than recursive flag on cp for consistency.
Objective
In: /content/somefile_compressed.swf
Out: /content/somefile_content.swf
I have a question which has been in part answered many times but nothing I found relateds completely to my situation. I am sure there will be people who will say RTFM but believe me I did, and searched as well but to no avail. I have a situation where I want to copy files created withing last hour in one directory into another one. The problem is that that the directories are on different levels in the dir tree so the absolute path is different. But I want to keep the relative path the same.
I want to copy new files from /mnt/path_to_webdav/user to /home/user. so if there is new file /mnt/path_to_webdav/user/doc/xy.txt I want it to be copied to /home/user/doc/xy.txt. Also if there is a new dir, say /mnt/path_to_webdav/user/newdir I want a new dir to be created in /home/user/newdir with all the files in it, should there be any. I can do find with exec and copy all the files into one directory.This is not what I want though. How do I preserve the relative path and get the files copied into their corresponding directories?
I'm searching for a script which finds changes/differences in two (s)ftp directories. Not 100% sure if this is possible with just FTP or do I have to transfer the files beforehand?
Something like: ftpdiff user@host1/directory user@host2/directory.
i got problem which slows my boot to linux. Before loading Ubuntu logo in console i see fast flash with words: "Warning: unable to find a suitable fs in /proc/mount, is it mounted? Use --subdomainfs to override." What should i do? To fix that warning?
View 3 Replies View RelatedI am trying to find out the command to list all the devices mounted at boot-time.
View 5 Replies View RelatedWhen I used the find command, I almost always need to search the local drives. But, I almost always have super large network shares mounted and these are included in the search. Is there an easy way to exclude those in the find command, grep and other similar commands? Example:
find / -name .vimrc
I wrote a script that easily runs it in the same directory as it was run below: #for f in *.MTS do ffmpeg -i "$f" -acodec copy -vcodec libx264 -threads 2 -deinterlace -vpre slow -b 20000k -bt 3000k -refs 4 "${f%.MTS}.mp4" ; #done
I want to be able to use the find command so it will recurse through all the videos in my videos folder. Is there a painless way to do this. Here is the start of my find command but it doesn't work. Any help appreciated:
find . -name "*.MTS" -exec ffmpeg -i 'basename{}' -acodec copy -vcodec libx264 -threads 2 -deinterlace -vpre slow -b 20000k -bt 3000k -refs 4 'basename{%.MTS}.mp4'
tell me the command used to find a specific word in directories and sub-directories in linux?
View 4 Replies View RelatedI'm using CentOS 5.5. I am trying to write a script that will find recently created directories (touched within 30 days) and create a symbolic link to those directories in another folder. Here is the script:
#!/bin/sh
cd /home/chris/Documents/;
rm -rf ./recent_files/*;
find ./ -maxdepth 1 -mindepth 1
[code]...
I need to strip the executable flag from all files within a certain directory and sub directories. Right now I'm doing it with a 2 step process
find /dir/ -type f -exec chmod ugo-x {} ;
find /dir/ -type d -exec chmod ugo+rx {} ;
Is it possible to modify the first line so that I can strip exec flag from all non-directory files? Since this needs to be done on a fairly regular basis across a lot of directories and files, I'd prefer not to use a bash script which would slow it down.
I want to move all files and directories that are 1 month old out to back up into a separate folder. There will be a lot of files and I want to make sure it copies properly. The problem I'm having is integrating a MD5SUM into it to check integrity. MD5SUM is not recursive, so I figured it would work in a loop when it copies each individual file, I'll do a md5sum on each file and delete that md5 once its verified it copied ok.
[Code]...
I also need some sort of error handling to output all md5's that didnt pass the hash check.
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies View Related