this is my fisrt time in this forum. I got the following message when I an using arm-linux-insight: [root@localhost insight]# arm-linux-insight Tk_Init failed: Can't find a usable tk.tcl in the following directories: /usr/local/share/tk8.4 /usr/local/lib/tk8.4 /usr/lib/tk8.4 /usr/local/library /usr/library /usr/tk8.4.1/library /tk8.4.1/library
[Code]...
On boot - I get the message udevd inotify_add_watch failed no such file or directory for my LVM physical volumes... volumes are mounted and appear to be usable
View 6 Replies View RelatedI downloaded some application for Linux (program microcontroller LPCXpresso). When I trying to install it some error appears
Code:
Can't find a usable init.tcl in the following directories:
/installkitvfs/lib/tcl /installkitvfs/lib/tcl8.6 /home/damon/src/installkit-1.3.0/out/lib/tcl8.6 /media/lib/tcl8.6 /lib/tcl8.6 /media/library /library /tcl8.6b1.2/library /tcl8.6b1.2/library
This probably means that Tcl wasn't installed properly.I think Tcl is installed, maybe I need to reinstall it if so, how? What I need to do?
am new to linux and trying to find a file in sub directories using find command as:find .-name *.jpg -type fBut I am unable to get the result as find command is not permitted by the server administrator.Is there any way to find files without using find command.
View 14 Replies View Relatedwhere can i find the qt libraries..?? building an rpm failed.
Code:
checking for Qt libraries... no :-(
configure: error:
I can't find the Qt libraries. It is recommended to set the QTDIR environment variable. Install the Qt libraries, or if you have them installed, override this check with the --with-qt-libraries argument, and I'll take your word for it. i got qt and qt-devel
I have F14 x86_64 installation on my laptop. I once used latex vary well. After recent update of the system, there seems to be a latex font problem. When I ran xdvi, the dvi window flashed once and disappeared immediately.
The error in the terminal is:
Code:
$ xdvi ms
Warning: Missing charsets in String to FontSet conversion
Warning: Unable to load any usable fontset
Error: Aborting: no fontset found
I have xorg-x11-font-utils, xorg-x11-fonts-misc, xorg-x11-fonts-ISO8859-1-75dpi, and xorg-x11-fonts-ISO8859-1-100dpi installed. I then ran:
Code:
# yum install xorg-x11-fonts-ISO8859*
to install some extra fonts. But the problem remained. What shall I do?
I'm in the process of trying to install FC14 64 bit to my Window 7 64 bit system. This new system has a 6.0 Gb/s internal hard drive.When I reboot with the F14 install disk I have made it past the disk verification (is Verified) and then picking a language but then I get the message "No usable disks have been found". In Win 7, the Disk Management window shows that 184 GB of space are free. Is there some disk preparation that I should do to make this space available?
View 11 Replies View RelatedI recently installed Fodora 14 on a PC with Asus mainboard.
CPU is AMD LE-1100.
The sound card is Realtek ALC662-GR Azalia High Definition Audio
Unfortunately after installation, there is no sound.
In fedora, System->Preferences->Sound window, Hardware tab is empty.
I tried to install two versions of sound card driver.
One came from the CD of the mainboard called realtek-linux-audiopack-4.06x
First I tried to run the "install", it went through to the final GUI stage searching for the sound card but failed to find.
Then I tried to do a manual install following the readme file.
Basically, unpack->configure->make
but make failed with the following error message
make[1]: Entering directory '/home/user/00Sound/realtek-linux-audiopack-4.06x/alsa-driver-1.0.14rc3-4.06x/acore' .....
/lib/modules/2.6.35.6-45.fc14.i686/build/include/linux/types.h:4:23: fatal error: asm/types.h: No such file or directory
compilation terminated.
make[1]: *** [memalloc.o] Error 1
make[1]: Leaving directory '/home/user/00Sound/realtek-linux-audiopack-4.06x/alsa-driver-1.0.14rc3-4.06x/acore'
make: *** [compile] Error 1
Later I tried to download another version of the driver from Realtek website
realtek-linux-audiopack-5.15
make also failed but with a different error:
make -C /lib/modules/2.6.35.6-45.fc14.i686/source SUBDIRS=/home/user/00Sound/realtek-linux-audiopack-5.15/alsa-driver-1.0.23 CPP="gcc -E" CC="gcc" modules .....
make: *** [compile] Error 2
Today I had to debug something going on with yum, if you run it normally with rpmfusion using the mirrorlist's, it hangs at "collecting package sack". If you edit the rpmfusions repo files to point at the baseurl for each, it works fine or you can disable the rpmfusion repos entirely. I saw this was a problem a couple of weeks back but thought this was fixed.
UPDATE Nevermind, this is a known problem [URL]
I'm having trouble doing a delete on this message, doesn't the forum have the "delete message" check box in the Edit mode anymore? I don't see it now.
I had a fresh install of Slackware 13.1 up and running. I was looking to use an app which could only run on a gnome distro. So I installed gnomeslackbuild. Ran into dependency hell so I gave up the ghost and decided to reinstall.Re-install resulted in a message "Call to lnusertemp failed(temporary directories full).Had this before a different machine and sorted with another install at the time.Tried this but it keeps coming up with the same message. (4 installs later).Quote:
xset: bad font path element (#23) possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
[code]....
opensuse 11.1 64 bit NVIDIA 180.22 yesterday i update my kde from 4.13 to 4.2. Before i install kde 4.2 ,i disable all repo about 4.13 and remove kde 4.13 .using one-click installer,i install kde 4.2 successfully.but i can not login my account in kde session. it says "call to lnusertemp faild (temporary directories full?)..."
use command
df /tmp
df -i /tmp
df /var/tmp
df -i /var/tmp
i found my disk have enough space,about 70% free space. i try to lonin use root account .it failed too ,with same error. any one know what is the matter about my kde 4.2?
I go to places-acces server-ssh and connect to a remote server with Nautilus.All ok.But I prefer to use vifm as my main file manager: I try to find the ssh-mounted devices in /mnt or /media but cannot fin them.Does anybody know where they are?
View 2 Replies View RelatedI am trying to exclude 2 directories with find and pass it into cpio. I have tried
Code:
find . -depth -path '.evolution' -prune -o -path '.gconf' -prune -o -print|cpio -aov > /media/caca/full$date
./.gconf/apps/evolution/memos/%gconf.xml
./.gconf/apps/evolution/memos
[Code]....
I'm having problems figuring out the process to find directories that DO NOT contain a certain file. I have a mp3 collection that all the album art is name "folder.jpg". Not all the albums have images. I need a way to find the albums/directories that do not contain "folder.jpg". I can find the ones that do contain "folder.jpg" with
Code:
find . -iname 'folder.jpg' -print0 | xargs -0 ls >> album_art
but that is as far as my bash-fu can take me. I'm not really sure what my next step is.
My directory structure is like such: a-z/artist/album/folder.jpg
I found a script on webmaster world that mostly does what I need it to, but have been making modifications to tailor it to my specific needs.I know that //..*/ tells awk to ignore hidden directories, how do I define more directories to ignore? (i.e. temp, var, etc)? I've tried playing with prune before the awk command with limited success...I know that there are many ways to do the same thing and keep running into brick walls.
View 11 Replies View RelatedWrite a script to list all the differences between two directories.
View 1 Replies View Relatedhow the "-prune" option works. I've searched quite a bit on line, and as far as I can tell, "-prune" works exactly the opposite as it says.
I'm using Apt-proxy, and I want to scan through the folders, and find files that end with "*.bz2" The problem is that the search takes a while because of all the "*.deb" files. Fortunately, they're stored in their own folder:
/var/cache/apt-proxy/ubuntu
/var/cache/apt-proxy/ubuntu-security
/var/cache/apt-proxy/partner
each have two folders:
[Code]....
I've got a simple command that does almost what I want.
The following will locate all files with a suffix of '_compressed.swf' and copy each into its same directory with a '.bak2' appended:
However, I need to replace '_compressed.swf' with '_content.swf' I'd like to use find, rather than recursive flag on cp for consistency.
Objective
In: /content/somefile_compressed.swf
Out: /content/somefile_content.swf
When I am in Nautilus, I want to be able to select a directory, then right click (or some other action) to do a file find on that directory. The gnome-search-tool would be a good candidate for this, if it could be an action in Nautilus. I know I can do a file find through other means, but Nautilus seems to be where I am when I want to search directories.
View 6 Replies View Relatedwhat i wanted to do was find all the files with a specific name from a tree, sort them by modification time and have their directory appended to them so that i knew where they were (because they all have the same name). i tried a whole bunch of different things and finally did this:
Code:
find . -type f -name world.sav -exec ls -l '{}' ; > ~/dfsaves.txt; gawk '{$1=""; $2=""; $3=""; $4=""; $5=""; print}' ~/dfsaves.txt | sort -n > ~/dfsavessorted.txt
this did the trick pretty well, but as you can see it is far from elegant and i think i'm doing some things wrong and kludgy
first thing i tried was "ls -lRt | grep world.sav" which worked except i couldnt distinguish the files because there were no directories. that took a lot of looking till i accepted i couldnt make ls print directories as well and append them to the files somehow that their relationship would be clear. i tried piping ls to find, doing it in reverse, passing them from grep etc. etc. until i read some more stuff online that got me using gawk and sort. the questions:
1. is there some other, more elegant and simple way to do this kind of detection and sorting?
2. is there any way to use a pipe after using exec? the semicolon seems to prevent this entirely, forcing me to use an intermediate file as above. i could just remove it later, but i'd prefer a straight piping.
I have a question which has been in part answered many times but nothing I found relateds completely to my situation. I am sure there will be people who will say RTFM but believe me I did, and searched as well but to no avail. I have a situation where I want to copy files created withing last hour in one directory into another one. The problem is that that the directories are on different levels in the dir tree so the absolute path is different. But I want to keep the relative path the same.
I want to copy new files from /mnt/path_to_webdav/user to /home/user. so if there is new file /mnt/path_to_webdav/user/doc/xy.txt I want it to be copied to /home/user/doc/xy.txt. Also if there is a new dir, say /mnt/path_to_webdav/user/newdir I want a new dir to be created in /home/user/newdir with all the files in it, should there be any. I can do find with exec and copy all the files into one directory.This is not what I want though. How do I preserve the relative path and get the files copied into their corresponding directories?
I'm searching for a script which finds changes/differences in two (s)ftp directories. Not 100% sure if this is possible with just FTP or do I have to transfer the files beforehand?
Something like: ftpdiff user@host1/directory user@host2/directory.
i'm trying to make a script that gives one output if a directory in /home is older than one month, and another if the directory is less than one month old. I looked around and saw that the creation date for directories isn't stored, or at least i couldn't find it? How is this possible to do then?
View 2 Replies View Relatedtell me the command used to find a specific word in directories and sub-directories in linux?
View 4 Replies View RelatedI'm using CentOS 5.5. I am trying to write a script that will find recently created directories (touched within 30 days) and create a symbolic link to those directories in another folder. Here is the script:
#!/bin/sh
cd /home/chris/Documents/;
rm -rf ./recent_files/*;
find ./ -maxdepth 1 -mindepth 1
[code]...
Is it possible to restrict users to their home directories and allow admins to have different home directories? Essentially I want users to have a folder in /var/www/html/$USER and admins to have either unrestricted access or have their root directory be ./ or /www or /etc. I have is set now so users have access to thier home direcotry but I need to upload web files as admin.
So far I have created:
chroot_list
user_list
[code]....
I need to strip the executable flag from all files within a certain directory and sub directories. Right now I'm doing it with a 2 step process
find /dir/ -type f -exec chmod ugo-x {} ;
find /dir/ -type d -exec chmod ugo+rx {} ;
Is it possible to modify the first line so that I can strip exec flag from all non-directory files? Since this needs to be done on a fairly regular basis across a lot of directories and files, I'd prefer not to use a bash script which would slow it down.
I want to move all files and directories that are 1 month old out to back up into a separate folder. There will be a lot of files and I want to make sure it copies properly. The problem I'm having is integrating a MD5SUM into it to check integrity. MD5SUM is not recursive, so I figured it would work in a loop when it copies each individual file, I'll do a md5sum on each file and delete that md5 once its verified it copied ok.
[Code]...
I also need some sort of error handling to output all md5's that didnt pass the hash check.
I wrote a script that easily runs it in the same directory as it was run below: #for f in *.MTS do ffmpeg -i "$f" -acodec copy -vcodec libx264 -threads 2 -deinterlace -vpre slow -b 20000k -bt 3000k -refs 4 "${f%.MTS}.mp4" ; #done
I want to be able to use the find command so it will recurse through all the videos in my videos folder. Is there a painless way to do this. Here is the start of my find command but it doesn't work. Any help appreciated:
find . -name "*.MTS" -exec ffmpeg -i 'basename{}' -acodec copy -vcodec libx264 -threads 2 -deinterlace -vpre slow -b 20000k -bt 3000k -refs 4 'basename{%.MTS}.mp4'
I am trying to install Fedora 14 from CD and the installer looks for usable disks and at the end says "No usable disks have been found".
View 6 Replies View Related