Ubuntu :: Updated To New Image And Forgot To Update Menu - Lst Can't Boot?
Jan 10, 2010
i know i have been having a lot of problems, but i keep having more this time, i ran update manager, and noticed that i was getting a new image, but i quickly forgot this. then, while installling the updates, it asked me if i wanted to keep my old menu.lst. i told it to keep my old one, since it worked fine. it then told me that i needed to restart, so i did. it got to where it would normally start loading grub, but my computer wouldn't go any farther. (would not load grub) i would think that it would still load my old image. i am writing this while running a liveUSB.
i ran the boot info script, and attached its output. i know this should be posted under installation&upgrades, but general help seems to be much more active. because of this, my father doesn't want me updating any more.
View 9 Replies
ADVERTISEMENT
May 24, 2010
I have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies
View Related
Aug 4, 2010
Is there a way to automatically remove the old linux image when a new one is updated?
When my system boots up it shows option
Ubuntu kernel version x.x.x-21
Ubuntu kernel version x.x.x-22
Ubuntu kernel version x.x.x-23
Ubuntu kernel version x.x.x-24
memtest
memtest + console
Windows 7 loader
Ubuntu seems to boot up the exact same regardless if I choose version 21 or 24. Dont recall the exact kernel since I am not in front of my computer now.
View 2 Replies
View Related
Jun 25, 2010
I upgraded my main box to Ubuntu 10.04 and everything runs fine, except for a problem with grub: I can't modify the boot menu in any way, I'm stuck with what grub2 thought was the optimal setup at installation time (and it got it wrong, btw). The current boot menu lists:
- my older 9.10 install in sdb2 (one kernel)
- legacy windows XP install on sda1
- my even older 9.04 install in sdb1 (two kernel versions)
- my new install in sdb3, with only one kernel (the one coming with the distro CD)
I tried anything I could think of to modify this menu:
- modify the /etc grub config file then running sudo update-grub
- using a specific app (system manager? don't remember its name)
- upgrading to the latest kernel
- removing and reinstalling grub
to no avail: the menu is still there in the above form, and I have to manually select the 10.04 (old) kernel by hand every time I reboot.
View 9 Replies
View Related
Oct 1, 2010
I've installed Ubuntu 10.04 on my laptop using WUBI to preserve my Windows XP installation. I plan to use it for work so have installed our VPN client and a desktop sharing application through a .sh script and a .deb package respectively. The Applications Menu was updated with the submenu and icons for the new applications and I copied thm to the desktop as well. However when I log out and log back in again my menus and desktop have reverted back to what they were before, and my icons have disappeared.
View 4 Replies
View Related
Apr 28, 2011
When I first boot up. I get the GRUB command line. What happened to the boot menu? And I can boot up into my Windows partition just fine. But when I try the other partitions i get "Unknown file system" or when I try to boot into the other ntfs drive, I get "BOOTMBR missing", but yet it does not mean Windows, because i can boot that just fine. I can't find my Ubuntu partition. How can I get the GRUB boot menu back?
View 1 Replies
View Related
Apr 13, 2010
I'm on Windows XP and don't have enough room on my HD to install ubuntu so I decided to put it on an external USB drive - but when I did it I didn't know about the advanced bit in the install so when I tried to boot I destroyed my MBR for windows and it wouldn't boot - so I did fixmbr from the windows recovery console and now I can boot into windows but can't boot from the USB Drive
View 2 Replies
View Related
Aug 12, 2010
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
View 10 Replies
View Related
May 28, 2010
I have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies
View Related
Jun 27, 2011
I forgot root password. I read that I have to access boot options during start up. I have two choices "desktop", "failsafe". There is boot options below but I cannot access it.
View 5 Replies
View Related
May 13, 2011
I am running Ubuntu 11.04. But now whenever I click 'Check' in my UpdateManager, it always said 'No update found' But the UpdateManager said 'The package information was last updated less than one hour ago.'
How can I fix it?
View 2 Replies
View Related
Feb 19, 2011
I am running 8.04 LTS on a Dell Inspiron 1525. Update Manager lists a bunch of items that just stay there forever - they never update, they never go away and the check boxes cannot even be checked.
Alot of these are "language-pack-gnome-xxx" updates. I also have one "skype" update that never goes away and can't be checked.Something's wrong and I don't know how to fix it.I want to eventually upgrade the entire OS but I am afraid to do so if my system has problems. I want the update manager window to be completely empty. I want these items to actually update or go away.
I don't have a degree in computer science so please be easy on me when it comes to terminal commands.I tried searching for this problem and, although I'm sure the topic has come up before, I can't seem to find a set of search terms that puts the topic within the top 10 results.
View 8 Replies
View Related
May 23, 2010
what actually gets updated when i say i want to update my rhel5 server?its kernal or anything else.
View 1 Replies
View Related
Mar 9, 2010
I have just updated gcc to 4.4.3 on my centos 5.4 server. This all went fine but now i need to update glibc and libstdc++, Any ideas on how i go about doing this.
View 4 Replies
View Related
May 10, 2010
I updated the following packages:
[Code]...
Before going to sleep I just closed my laptop without shutting down, but the next morning when I unlocked I had no sound. Does anybody see something suspicious in the updated packages?
View 1 Replies
View Related
Mar 13, 2011
I'm looking for a way to have the access log for my nginx install scroll up the terminal as lines are added to the log. I think I need a command like cat access.log | diff but I'm not sure exactly what it should be.
View 1 Replies
View Related
Feb 10, 2010
I am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
View 14 Replies
View Related
Aug 10, 2010
I havent used Linux in a long time. I dug up an old copy of Suse (version8.2), and installed it on an old 599MHZ PC. Ive been trying to update the various libraries to be able to get a updated version of Firefox installed. Is there any chance that this can work? I need to know if Im wasting my time and should just put winxp on this PC. Also, I cant get any repositories working. I assume the default ones I have on the Suse installation are bad and the ones for the later versions will not work.
View 9 Replies
View Related
Nov 10, 2010
I was assigned to do all the RHEL5 updates. All installed fine including the new kernel except for the updated libX11 and python packages. Does anyone have any suggestions relating to a fix for this?
View 3 Replies
View Related
Apr 11, 2011
How do I fix this? Broken Image on Menu Bar
View 9 Replies
View Related
May 13, 2011
I am creating custom install media using the Fedora Core 14 DVD as a base and I have gathered all of the packages and their dependencies I require using the yumdownloader command.I made sure to download the @core group along with the ones listed above. The problem I'm running into is that I don't know how to update the media's repo information to reflect some of the updated packages I have downloaded. So when I go to install on the device, it's saying it can't read/open a certain package and you can see that it's looking for an older version because I'm guessing its repo is telling anaconda that this is the specific version to look for. I'm looking for a way to "update" the repo found on the installation media.
View 1 Replies
View Related
Mar 26, 2010
Very new to Ubuntu, but I was able to upgrade from 9.04 to 9.10 with no problems. New to forum and couldnt find any help in other posts. Like everyone, I was itching to try the newest and greatest. Tried updating last week but had the "openoffice..." bug and wouldn't install. Tried last night and everything went fine, until I restarted the system. Now it won't complete the boot. It show the GRUB, and some other startups, but them blank screen. 10 min later nothing. Tried it 3 more times. I think I am stuck, right? New install?This is what I am thinking of doing- 1. boot from old cd to get my files out. 2. fresh install of 9.10 and be patient for the offical release. Is there anything else I could do?
View 8 Replies
View Related
May 9, 2010
I updated to Ubuntu 10.04. I had a nice dual boot system going with Ubuntu and Windows Vista. After the update I can't boot Vista anymore - and I really need itI don't know much about Grub, but I know enough about computers to edit config files etc.What settings should I punch into grub.cfg to get Vista to boot properly?
View 9 Replies
View Related
Feb 12, 2010
I have been using Ubuntu Netbook remix for a while and have been pretty happy with it. Over the weekend, the software did a typical update, and the next time I started the computer it goes straight to the GRUB command line. On the same day, I installed ATanks, so I am not sure which caused the problem, but I really don't see the game causing a problem with the boot loader.Installed through Wubi.v. 9.10Dual boot w/Windows; no problems booting until now.I do not know which updates were installed and cannot boot into Ubuntu to find out.At the GRUB command prompt, I tried to boot, but it did not load anything other than vmlinuz; when i searched to make sure I entered the correct partition (/dev/hda2), I noticed that, well, there were no partitions in /dev
View 2 Replies
View Related
May 9, 2010
I've got a dual boot system with both Vista and Ubuntu. After upgrading to 10.04 my Vista doesn't load anymore. I select it in the Grub menu and the computer just hangs.
Are there any known fixes for this? Where do I start? I'm an Ubuntu novice, but I'm an able computer fixer.
View 1 Replies
View Related
Jun 15, 2010
I have grub dual boot. I upgraded from ubuntu 9.04 to 10.04 today, there was some questions about grub, and I marked all of the /dev. But now I cannot boot my windows partition.Windows XP is on the grub boot menu, but if I click on it, a black screen show up, and only a blinking cursor.When i boot ubuntu, I can read the ntfs partition.What do I have to do, to get windows xp to boot again?
View 5 Replies
View Related
Jul 8, 2010
I recently updated the kernel of lucid from 2.6.32-22 to the ""-23 release through update manager. Now whenever i try to boot the new kernel from GRUB the screen goes black and the computer stops responding with the caps lock and scroll lock lights flashing on the keyboard.
I can still boot into ""-22 fine and keep using ubuntu.
My first thought that the problem was the newer kernel itself so I tried to update to 2.6.33-5 from [url]but the same boot problem exists within this one also.
Because it goes straight into the black screen after GRUB I have no way of telling what has happened without error messages. Would this appear in any log files and if so which ones?
View 9 Replies
View Related
Nov 28, 2010
I recently upgraded Linux kernel headers for version 2.6.35 on x86/x86_64 from 2.6.35-22 to 2.6.35-23. and my system will not reboot to the upgraded kernel. To reboot I have to force shutdown my Toshiba L-450 laptop and the restart. This brings me to the GRUB screen were I can choose to use the previous 2.6.35-22. Normally do not see the GRUB screen as I am only running Ubuntu 10.10 64 bit on this computer. I have tried reinstalling linux-headers-2.6.35-23 and linux-headers-2.6.35-23-generic and got the same result.
View 4 Replies
View Related
Jul 12, 2010
I updated Grub2 and now I cannot boot my Vista or Windows 7. I am running Ubuntu 10.04. I updated because Grub2 was not updating to the newer kernels that were being installed. Now the new kernel is showing in the boot menu, boots fine into Ubuntu, but my Windows installs won't boot. Current installed version is grub-install (GNU GRUB 1.98-1ubuntu6).
View 4 Replies
View Related
Sep 17, 2010
Problem occurred after attempting to update firefox and configure evolution. Attempted to update firefox last night, it froze, attempted to open the system monitor to end the unresponsive process, and got a message saying the system was unable to support a new process because it couldn't fork. Did a forced reset, and the following now happens upon starting up. After selecting ubuntu (as it's a dual boot system with Windows XP) at the grub loader, blank screen, to this:
Code:
mount: mounting dev/disk/by-uuid/5b24d4b5-9b8d-4608-9387-0d92756dcdd8 on root
failed: invalid argument
mount: mounting /dev on /root/dev failed: no such file or directory
[code]....
It will not run recovery mode, and I have no bloody what it means by init=bootarg.
EDIT: Nevermind- I'm going to try the methods listed in [URL], and hope the gods of fsck smile upon my lowly hard drive.
View 1 Replies
View Related