I am unable to activate the Thesaurus feature in LibreOffice as provided in Ubuntu 11.04.
I have tried the "fix" as outlined at [url]but without success.
I have used OpenOffice as provided in other Linux systems with no problems.
I have installed Enterprise Linux Version 5 provided from Oracle
I am able to access Internet using network cable
how can I enable WIFI service ,so that I can use internet without the network cable
I am trying to install LibreOffice 3.3 by following the instructions I found at [url]
Below is the output I get after running these commands:
Code:
Output:
Code:
Code:
The following packages have unmet dependencies:
I am running Ubuntu 10.04 and I have OpenOffice installed. Is it possible to install LibreOffice 3.3 from PPA even though it is said that the commands target Maverick? Do I have to uninstall OpenOffice before installing LibreOffice?
Im trying to enable the burn feature in compiz fusion so my computer can use the effects in the applications, places and systems taskbar how would I go about doing that ?
View 6 Replies View RelatedInstalled LibreOffice in Debian Wheezy (KDE)Open a document and type something.
1. Click File -> Export to pdf
A pdf will be generated. No problem
2. Click File -> Print -> Print to File
Only the Postscript option is available, PDF is not available.
Any idea how can I configure so as to get the pdf option when doing a print to file?
Does anyone know what happened to the Multiseat feature that had been in the feature list at one point?To briefly summarise, a single machine with multiple graphics cards, sound cards, keyboards & mice provides multiple seats for users. Each user gets their own monitor, keyboard, mouse & perhaps audio. The rest of the machine resources are then shared.
The last I saw on the topic was this discussion, although I have a recollection that there was going to be support in a newer version of X.Org. I've googled around quite a bit, but can't seem to find anything.
Anybody know anything? It would be a great feature to have and it's frustrating to have had such an omission since F8 :-o
Sometimes, when I need to affect some quick changes on my box, I boot up in runlevel 1 by adding "single" to my kernel line in the Grub menu. I use Grub because I also have Vista+RHEL+CentOS for operational reasons and then Slack for everything else.Since I upgraded to Slack13 I noticed that this was not working. I assumed that it was because I had installed on a encrypted LV, so I tried it on VirtualBox installs. I tried both on GRUB and LILO on the Virtual Slack. I tried both the 32 and 64 bit versions. It does not work.
View 10 Replies View RelatedI am using centos 5.2 with kernal version "kernel-2.6.18-92.el5" i cant play mp3 songs in any of the players provided..can u help me in installing "vlc" or any other versatile player..thnx in advance.
output of "yum list *videolan*"
yum list *videolan*
Error: No matching Packages to list
Does anyone know how i would be able to activate the internal sub-woofer on a Mac. I have sound, but no bass response. I'm trying to achieve the same sound quality as when I'm in OSX. The iMAC's sound card is built on top of the Realtek ALC885 chipset driven by the Intel ICH8 HD Audio controller.
View 6 Replies View RelatedI cant get the STA driver activated. I keep getting the error:
Code:
SystemError: installArchives() failed
Synaptic can't mount my install CD, maybe that has to do something with the problem.
[code]....
Installed Fedora 11 yesterday and was trying to use the Admin->Software Update but initially it complained about no connectivity (this is happening even though I was able to browse the web via FireFox!). So I went to Admin -> Services, and restart the Network Manager. It was then able to download about 250 updates. However, when I clicked on Install after the download, it says it was disconnected. When I went into Admin->Networking, I found out that the eth0 interface is Inactive. However, the Activate button is greyed out. I have been searching in the User Guide, the FAQ, the bugs section and have been unable to find out how to fix this. If I goto the command prompt, and typed in "ifconfig" I can also see that there is no IP and no packets transferred.
View 5 Replies View RelatedI have been using a little inexpensive Acer, mainly to retrieve e-mail and to browse the web. I normally work on a Mac platform ( I am a designer). A week ago the Acer took a dive from the counter top to the carpet. (not the first time). Since then (coincidence?) the mail function works fine, but the browser does not go on. What should I do?
View 2 Replies View RelatedI am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
I have tried the command on ubantu workstation but it giving error : # mii-tools SIOCGMIIPHY on 'eth1' failed: operationsnot support. no MII interface found.
Internet not working. tell me anonymous of kudzu command in fedora.
I am unable to activate video chat in ubuntu.
View 2 Replies View Relatedi have installed ubuntu on my toshiba satellite-L640 and i m facing some problem
1. unable to activate broadband STA wireless driver by additional driver option..
2. unable to activate ATI/AMD propreitary FGLRX graphics driver by additional driver option..
3.my laptop doesnt show battery indication that how much charge is left
4.headphone not working
5.sound of vedios and song is very less in ubuntu then windows..
for over at week i have been trying to get my wireless card to work now. If i open Additional drivers, the non proprietary driver seems to be working and active. If i deactivate that and use the STA driver instead, it says active, but currently not in use. When i use the non proprietary driver, i can check mark on 'activate wireless', but nothing happens. When i use the STA driver there are no wireless options. I'm not sure if its important, but when i do "sudo lshw -C network" when the STA driver is active but not in use, the network status changes from 'disabled' to 'unclaimed'. When i came here, i tried to install "firmware-b43-lpphy-installer" as the sticky said i should, but the installation fails. It says my card is not supported: "Not supported card here (PCI id 14e4:4727)!"
[Code]...
i installed kubuntu 11.04 on my hp-g62 laptop and i'm using a wireless router to connect to the internet.. but i'm unable to use the wireless network. So i would like to know as to how to enable the wireless settings in kubuntu?
View 1 Replies View RelatedI just installed StarDict and so far I love it.I got it from the repos and then installed a dictionary from here, where their site directed me: http:[url]....I went back to their site to look for a thesaurus and found one on this page: http://stardict.sourceforge.net/Dict...w.dict.org.php
When you click on the tarball link for "Moby Thesaurus II" it takes you to a sourceforge page with many different versions of StarDict itself, and not the dictionary/thesaurus package.tell me if I'm just missing it on the sourceforge page, or does anyone know a place to download a good thesaurus for StarDict?
I have Installed Fedora 10 and I have assigned manual IP address to eth0 and trying to activate the eth0 but all buttons are disabled.
View 2 Replies View RelatedHow do i install spell check and the thesaurus?-really annoying not having these by default...
View 9 Replies View RelatedI'm using kile in ubuntu and am wondering if there is a spell checker and even a thesaurus for kile? And is there a way to get a live pdf preview next to where you enter text into kile?
View 1 Replies View RelatedCode...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.
However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.
I was running Fedora 13 on my old computer with a nvidia Geforce FX 5200 graphics card using the nvidia-173xx driver from fusion. After upgrading to Fedora 14 (the first day of its release) the X server wasn't working anymore, the screen just froze up after the progress bar. With Alt+F4 I "moved" to text mode and gave the startx command, but I got the fatal error message that there was no usable configuration detected. I deleted the xorg.conf file and afterwards I was able to start X again. I use the nouveau driver now, but it doesn't nearly work as good as the nvidia-173xx driver. I have it installed, but when I try to activate it (by running nvidia-xconfig as root) the X server doesn't work again after restart, and I have to do the same thing all over again.
View 6 Replies View RelatedI just realized my Thesaurus function is inactive. Ctrl F7 does nothing, and on the pull down menu Tools>Language the Thesaurus option is greyed out.
I went to Tools>Options>Writing Aids and under the Language Modules, Thesaurus is listed but no dictionary box to click. No sub module listed under Thesaurus.
There a spell check dictionary listed and marked -- Hunspell Checker.
When I go to the OOo extension page I see no Thesaurus files to download?
How can I get the Thesaurus working as without it Writer is going to be pretty useless. I am using the GB dictionary.
I tried upgrading to OOo 3.1 but that hasn't helped either.
I've been trying to get Security Spin up and running (after having tried unsuccessfully with knoppix STD). I need to be able to connect to my home network, or hell any wireless network.I've tried using iwconfig wlan0 as well as the options in the Network Configuration panel as well as other related panels. I'm able to change and set up profiles for the wireless card, but not to activate them. The button just isn't clickable.If it helps, I'm running Security Spin from a unetbootin usb drive. The wireless card is identified by the system as "Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection" .
View 2 Replies View RelatedWhat I can't seem to find in the repositories is software for Dictionary Definitions and a Thesaurus - in another distro there is what is called "Online Dictionary" (which includes synonyms) and another distro there is what is called "WordNet";So, I would like to know the name(s) to look for in the repositories for software for a Dictionary / Thesaurus, where it is two different software packages or just one.I did see the "webpin" finds "WordNet", but installation of that fails.
View 7 Replies View RelatedI keep getting this error every time I try to enable the ipod plugin for rhythmbox. Is there something I can do to repair this?
View 2 Replies View RelatedWhile using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:
Code:
Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)
Code:
[URL]
After finding no help there, I ran rhythmbox -d to debug:
Code:
(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized
[code]....
