Ubuntu :: Trying To Compile Gcc From The Svn Trunk And Get This Error
Sep 21, 2010I'm trying to compile gcc from the svn trunk and I get this error
Quote:
I'm using ubuntu Lucid 10.04
I'm trying to compile gcc from the svn trunk and I get this error
Quote:
I'm using ubuntu Lucid 10.04
I'm trying to compile clementine-player from trunk without success. When running cmake, everything seems fine:
Code:
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
[Code]...
I have recompiled QT 4.6.2 and it's working ok, I got the same errors with 4.5.1. Version is Slackware64-13.0 with some upgraded dependencies like taglib.
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View RelatedAs I cannot use svn to download the latest ffmpeg from trunk.Can anyone explain to me how to use proxychains properly so I can download the latest ffmpeg and compile it?
View 9 Replies View RelatedI installed Squeeze, it had kernel 2.6.30-2-686,it was upgraded to 2.6.32-trunk-686,now it is 2.6.32-3-686.What does the -trunk- mean?
View 4 Replies View RelatedWhile trying to install AWN Trunk today I ran in to this error
Code:
tobias@tobias-Studio-1737:~$ sudo apt-get install avant-window-navigator-trunk
Reading package lists... Done
[code]...
running ubuntu 11.04 and trying to compile vlc 1.2 from git. ran apt-get build-dep vlc, git for the vlc source, bootstraped fine, the error is on configure
ran ./configure --enable-x264 and got the error
Quote:
configure: error: Package requirements (xcb-composite) were not met:
No package 'xcb-composite' found
I can post a log file later if needed, I just turned off the laptop in defeat...
View 1 Replies View RelatedWhen I try to compile it get there errors: [URL].... compiling with: gcc -v execv.c -o hola I already installed build-essential, what could be happening with my gcc compiler? this is my code, as you can see it's not complex
[code]....
Does someone know whe I can find libgthread-2.0.la?
View 3 Replies View RelatedI get the error
Code:
make[1]: Leaving directory `/usr/src/linux-2.6.33'
test ! -e scripts/package/builddeb || mv -f scripts/package/builddeb scripts/package/builddeb.kpkg-dist
[code]....
I'm attempting to compile the latest version of VLC from source. I'm able to run ./configure without any errors, however when I try to make I receive the following error. I don't want to install the program from the repositories because it's outdated and the tray icon doesn't blend in.
-rw-r--r-- smothpocket/smothpocket 181 2010-04-12 18:22 default/subX/playtreeglyphs.png
-rw-r--r-- smothpocket/smothpocket 39468 2010-04-12 18:22 default/subX/about.png
LUAC lua/extensions/allocine-fr.luac[code]....
I'm trying to install a wireless USB adapter to a machine so I can get it internet access, unfortunately when I try to run the provided install script I'm getting an error 2, and I've never encountered that before. In fact I'm getting another error which makes me concerned that they just failed at coding this driver...
Code:
/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:
In function 'LeaveAllPowerSaveMode':
/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:712: error 'HAL_DATA_TYPE has no member named 'autosuspend_disabled'
make[2]: *** [/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.o] Error 1
make[1]: *** [_module_/tmp/driver/Linux/driver/trl8192CU_linux_v2.0.1170.20101112] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-2.6.32-28-generic'
make: *** [modules] Error 2
Compile make driver error: 2, Please check error Mesg
Something is clearly broken but I am not sure what, I'm awfully new to this, and wireless didn't really exist the last time I used Linux...though this doesn't appear to be specifically related to the wireless function of the driver, it's a make compile problem, it's just mysterious.
I upgraded testing today on my intel laptop. During the upgrade I got the message that the new kernel would require additional firmware, see attached. Is the solution for this to install the driver from Realtek? [URL] If so, the instructions said to check if the driver was already installed, but what does the output below mean?
conor@con-u3s:~$ lsmod | grep r8169
r8169 27596 0
mii 4664 1 r8169
I'm always getting a blank console screen after booting a 2.6.32-trunk-amd64 kernel in squeeze. I still can read the line "Loading, please wait ..." in the display for a second - then it's completely black until X windows is starting. When I try switching from the X console to another virtual console (by pressing Ctrl-Alt-F1 e. g.), the complete system freezes. I have to hard reboot then.When I boot the previous 2.6.32-3-amd64 kernel instead, everything is fine as expected, though.There's a line "GRUB_GFXMODE=1024x768x16@60" in /etc/default/grub as well as a line "set gfxpayload=keep" in /etc/grub.d/00_header. So the problem might be framebuffer related in any way. Any ideas what could be tried?The system is a Latitude E6500 with a Mobile 4 Series Chipset Integrated Graphics Controller
View 2 Replies View RelatedI'm attempting to install ndiswrapper-dkms package. The installation fails due to the following error:Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. dpkg reports that the source is installed
[code]....
I've been searching google for the past couple of days but haven't found anything specific. Any ideas to get me going in the right direction?
uname -a reports
Linux debtop 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 GNU/Linux
Bluez 4.34 Compile - Error...make[1]: Entering directory `/usr/src/bluez-4.34/audio'
./configure and make output.
I need to compile glibc.
What is this error ?
Code:
I have this below from a mesa git 20101002, and from the 7.9_rc2 tarball.
Code:
It isn't the only error. I get one about trying to make before make depend, but if I hit up arrow and return, it's gone. This one is persistent.
The issues on configure were libtalloc and libdrm. I have the libdrm .pc files copied from another box in /usr/lib/pkgconfig. talloc I just made, giving it the samba version number. configure passes with no variables passed to it. I am not passing /usr/include to this at any time. It doesn't show in the Makefile afaict.
tty-clock won't compile for me. I'm probably missing something simple, I've never really compiled anything from source that I didn't write do I'm not sure how to do this. Here's the error:
[Code]....
My first time to try Networkmanager and I get this error
[code]...
Is there a dependency I missed?
What am I doing wrong here in compiling 1.2.6! I am following this link: url
What is wrong with this?? I DL'd wxGTK-2.4.2.tar.bz2 from url, which got me this:
~$ tar -xvjf wxGTK-2.4.2.tar.bz2
tar: wxGTK-2.4.2.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
What did I do wrong?? And bunzip2 gives this:
~$ bunzip2 wxGTK-2.4.2.tar.bz2 bunzip2: Can't open input file wxGTK-2.4.2.tar.bz2: No such file or directory.
BTW, the file is on the Desktop. The reason for all this work is that 1.3.12beta no longer has the mixer toolbar built-in that allowed easy to choose devices like "line-in","mic", etc. I have 1.2.6 installed on an XP machine and it is great.
I installed linux-image-4.1.0-trunk, when I boot into the kernel there's no wireless available. Dmesg indicates seems like the firmware is loaded, although firmware-iwlwifi is installed:
...
[ 11.047031] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-13.ucode (-2)
[ 11.047039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2
My problem is that it won't load the dkms module and Virtualbox will not run.
View 14 Replies View RelatedI'm writing a script for asterisk to monitor trunk failure, i do a loop for every trunk it got nad would like to name variable like server1=, server2= naming the server upgoing as the trunk is. here is the scripts:
[Code]....
what i would like to do is name the variable server, username and status with the count variable, like this server$COUNT to have server1 when on trunk one, bu as soon as i add the $COUNT after the server, it seems to try to make it a command, it says that:
Code:
./test.sh: line 45: server1=74.63.41.218: command not found
This is only for Lucid and Maverick, as there's no 0.8.1 builds for other releases in this ppa. Why?
Because today there seems to be a fuss about 3g usb-modems. And as of network-manager version 0.8.1, there is added support for those and some more.
The release features for current version 0.8.1, from gnome.org
Lucid ships with an earlier version and there's a ppa for daily builds (that could break, so use it on need-only-basis).
Visit the link, or google: NetworkManager daily trunk builds for ubuntu
Follow the steps on the site to add it in the repositories.
After that, it's just a simple
Code:
apt will update the needed files. Then reboot, you're done.
I strongly recommend, that you disable the PIN code query for your SIM card and enable 'Connect automatically' from:
As this seems to be more reliable than connecting/reconnecting manually from the applet list. After that, it's plug&play.
I use the modem Huawei E1820 (uses option1 driver) and for me, this update...
- gives you the ability to choose the desired network; 3G only, 3G pref., EDGE etc.
- Then it shows the signal strength and the technology used atm.; HSPA, UMTS etc.
And the main reason I installed it, bluetooth DUN support. So far it has been working great with Lucid on 32bit architecture, and I don't have to disconnect the modem between boots, or after suspend/resume.
I am trying to compile octave-3.2.4 with centos 5.5 and I get the following error
[code]...
I have looked and I can not find any solutions.
The README reads:
Quote:
Code:
How to do...........concerning this 'lmysqlclient'?
I have a driver source which includes linux/module.h.The following error occurred during compile.the kernel source is: 2.6.33.6-147.2.4fc13.i686the compiler is: gcc-4.4.4-2.fc13.i686
In file included from /home/joseph/rpmbuild/BUILD/kernel-2.6.33/linux-2.6.33.i686/arch/x
86/include/asm/cmpxchg_64.h:4,
from /home/joseph/rpmbuild/BUILD/kernel-2.6.33/linux-2.6.33.i686/arch/x
[code]....
I'm trying to compile the last inkscape release but got the following errors (slackware 13, 32-bit):
[code]...