This is my first ever time trying out a Linux based system and I would like to ask a quick question. When you plug in your cd/flash drive it comes up with the option to try Ubuntu before installing it on your hard drive. When I go to try I can't connect to my home network. Is this because it is in the try mode? Or something else?
View 4 RepliesNow that I've [url="http://forums.debian.net/viewtopic.php?f=10&t=48745"]destroyed[/url] the installation on my notebook, and a fresh install of Lenny with upgrade to Squeeze (to try out smxi) didn't work, I wanted to install Squeeze fresh.But not from a CD. That's too tired, and I've never actually installed from a USB stick.So I set out to do this, for it doesn't seem hard at all:
http://d-i.alioth.debian.org/manual/en. ... 04s03.html
I even get to use cool-sounding commands like zcat, so this is way hipper than burning CDs, of which I have far too many lying around. Now here's the thing, it boots up and gets started, but the versions of don't match. I got both of them from the [url="http://www.debian.org/devel/debian-installer/"]Debian-Installer page[/url] from netinst , both amd64, specifically: http://d-i.debian.org/daily-images/amd6 ... oot.img.gz (30 MB, don't click)
and http://cdimage.debian.org/cdimage/daily ... etinst.iso (139 MB, don't click)
How on man's green web,then,do I make sure that I match up the correct versions of the netinstall image and the installer files?hangs head and slooowly reaches for CD spindle...
IWithout having made any configuration changes (that I am conscious of), for the past few days I have been unable to connect to my home network - and hence to the internet.My 64-bit Kubuntu (10.4) is on a dual boot machine.If I boot XP then things work as they have done for the past year or so - no network connection problems at all. So I know it's not hardware, LAN or router/cable-modem related. In addition none of the other systems on the network have a problem.
I tried to check if there are some firewall settings that might have changed - but cannot seem to find anything about the firewall in my Kubuntu set-up. Indeed I cannot figure out how to do any problem source identification.
I've been using Ubuntu 10.10 for 2 days and there's one problem left to solve. It cannot connect to my home encrypted wifi but it has no problem connecting to open wifi. I used this site [URL] to change my wifipassword but it still doesn't work. Interestingly my Windows partition connects to it without any change so I don't even know if I'm really changing the password. The router is a Linksys WRT54G2. How can I change the wifi password, know what it is, and make sure Ubuntu knows how to connect to it?
View 2 Replies View RelatedI am still building my home network, and want it o be able to connect to different computers by:
\pc-name
We have 2 types of computers:
Computers in the workgroup WORKGROUP (2 debian, 1 vista)
Computers in the domain TUE (required by our university) (3 vista, 2 xp)
Within the workgroup, I can call pc's by their name, but this is not possible by the pc's in the domain. I can however always do \ip and the 2 debians have a samba server running, which is available through \ip (and \name, for the computers in the workgroup).
why my VCN will not allow me to connect from my phone outside of my home network... When I do open up remote desktop it changes what it says... one day it says only available through Name.Local and then the other day it shows the IP address and says over the local network. I have tried going into gconf-editor and messing around but it still doesn't seem to work.. I'm not entirely sure how to mess around with my router.. and if that is necessary..
View 5 Replies View RelatedWhile my wireless is generally working, there's one problem: I can't connect to my home network through it on my laptop. My desktop (which has an Atheros-based wireless card and is configured through ifup) connects just fine, as does another family member's laptop (also with an Atheros chip, but using NetworkManager) My laptop (With an Intel Centrino wireless chip), however, will not connect to the home router, though it can connect to public (unprotected) access points such as the one at my school. My home network is a private (hidden) network and also requires a WEP key to connect to and, as mentioned, works fine with several other systems running 11.3. I've attempted to use both ifup and NetworkManager and can't connect using either method. With ifup, the connection attempt just seems to time out during the connection attempt, while with NetworkManager, it doesn't even seem to try: I select the connection that I defined and click "Connect" and nothing happens after that. I'm using KDE and installed from the LiveCD
View 2 Replies View RelatedI'm looking for an easy guide to connect to my home network with Fedora 12. So far I did what I thought was pretty straight forward but I'm not seeing any computers. Here is what I've done
yum install samba
restart
system settings -> advanced -> samba
I set up my two paths that I wanted to be shared when I go to network in Dolphin I'm seeing Network, Network Services and Samba Shares If I click on Network nothing shows, same with Network services, samba shares shows nothing and the bottom reads "unable to find any workgroups on your local network. This might be caused by an enabled firewall"
There are two workgroups which my Ubuntu machine shows fine, workgroup and mshome, I can connect to my roomates and my girlfriends computer no problem within Ubuntu (they are running XP, Vista and Ubuntu).
I have a network that consists of a few desktop machines, laptops, and two Internet connected linux servers. The Linux servers are the gateways, routers, and firewalls for my desktop and laptop machines.Whenever I'm away from home; I can connect to my home machines over the Internet by first ssh'ng (technically I use Webmin; because my firewall on each Linux servers blocks ssh from the Internet.) to one of the linux servers and then ssh'ng to the desired machine on my home network.
This works fine for my home linux machines. But not my Windows machines.I'd like to be able to rdp or rdesktop to my Windows machines.Will OpenVPN allow me to accomplish this ?
I have a home network of 4 computers - 3 Windows & 1 Xubuntu I'm able to connect to the Xubuntu machine from all of the Windows computers, but I can't do the opposite - connect to the Windows machines from the Xubuntu. I'm using Gigolo, and I can see the network, but it says no servers found.
View 5 Replies View RelatedI am trying to connect to my home network which is wpapsk when i click on the networking item in the tool bar at the top it shows my network and when i click on it to join the network it asks my for my security and it only lists wep 40/128-bit key or wep 128 bit phrase or leap?? or dynamic wep(802.1x)
there is no choice for wpa. but when i set up a new network or attempt to edit the network listed under wireless i can see wpa but the system does not connect i have tried looking around for info all with instructions on "enabling" wpa by using wpasupplicant which is there but nothing happens in fact when i try the code sudo gedit /etc/network/interfaces i get command not found which in all the techniques i have tried require this line.
I got my netbook in the mail yesterday, opened it up, logged in, and Windows 7 was installed. Being a Windows hater my whole life, I followed a friend's advice and downloaded Ubuntu netbook, made a USB drive, changed the BIOS settings, all that. Here's when the stupidity occurs--I decided to go ahead and install Ubuntu without trying it, and to delete Windows to do so. A couple minutes later I realized that was a really, really stupid idea, so in a panic I turned my netbook off. I turned it back on and it was still on install but not really moving, so I powered off and on again and went back to the "Try Ubuntu" or "Install Ubuntu" choice screen. I chose "Try Ubuntu" and found that it did not recognize my home wifi network or ask me to join--or any wifi network, for that matter.
Now, it did recognize my wifi network the few minutes I spent on Windows 7, so I tried to change the BIOS settings back to where I could just use that until I figured out the problem. But no matter which setting I tried (HDD/SDD just gives me a black screen, and FDD and LAN do the same as the USB drive), I can't get back to Windows, so I guess I did delete it. Which leaves me with a netbook that can only connect to the internet via ethernet cable. Which kind of defeats the purpose.
Questions I should answer:
1. How am I trying to get online? My home's wireless network. We have a router. All the other laptops in the house connect fine.
2. Who is my internet service provider (and in which country?) COX, United States.
3. Can you get online with any other method? Yes, the internet works fine with an ethernet cable.
4. How am I getting online to post in this forum? My parent's laptop.
5. What hardware are you using? Toshiba N505 netbook and a router. I can give more information about the router if you need it, but I doubt it's the program since the other laptops are fine.
Give me one moment and I will add some code that it gives me when I put in the commands this website tells me to.My two final questions are:
1. Is there any way to recover Windows without buying it again?
2. How can I get Ubuntu to connect to my home wifi network?
EDIT: Here's some code. I have no idea what it means, but hopefully you do.
To run a command as administrator (user "root"), use "sudo <command>".See "man sudo_root" for details.
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller[code]......
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies View RelatedI have an Ubuntu 10.04. It connects perfectly with a Netgear wireless to the internet at my work place. But i cant connect it to my home Netgear network. It connects to the router. Receives IP address. But no internet. But I'm able to connect to internet using ethernet. I'm also able to connect to internet wireless in my Windows.
View 5 Replies View RelatedI have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
Since I installed fedora on my desktop (there is no other OS on my desktop computer at the moment) I can't connect to my laptop which has Windows XP installed on it, although I can normally connect to internet from both computers. Here is the drawing to illustrate how everything is connected:
On the picture you can see that the phone line goes to the ADSL modem. The ADSL modem is connected to the Wireless modem with LAN cable. Wireless modem is connected to my desktop computer with LAN cable, and trough the wireless connection to the laptop. Internet is working fine for both computers, but desktop can't see laptop and vice versa. What do I need to do in order to see the laptop?
I am running openSUSE 11.2 and just recently my network has been down. I'm using Gnome, but using Yast to configure my network (I'm usually forced to use wireless as I travel a lot on my laptop). Usually, when I'm connected to a wireless network, it will show up as so in the Gnome start menu, but recently, it will only say Wired there, even though I have nothing connected to my ethernet jack. I can connect wirelessly to a home router, but cannot use the wireless in any other way. I have tried manually disabling the ethernet connection to no avail. Unfortunately I am limited in my linux knowledge, so I am kinda stuck here.
View 1 Replies View RelatedI'm using the debian testing netinst image (from below url) and trying to install on virtualbox (part of a debian testing vagrant base box build pipeline I've got). This hasn't worked properly for last couple of weeks. Host system is also debian testing.URL....
if I accept all the defaults through the installer (apart from small details like timezone), I end up with a system in which the network does not work. It seems that /etc/network/interfaces has eth0 but the actual network card is called enp0s3, so no network comes up at first boot (despite that the network works fine during the actual install). I can easily fix it after the first boot by editing /etc/network/interfaces and replacing eth0 by enp0s3 and then doing an ifup. This is fine for a workaround but begs the question of why does it fail in the first place.
I have googled a bit and found this thread: [URL] .... which describes a similar issue, and there are other threads out there describing the change.
The udev change seems reasonable enough, but also some package involved in basic debian netinst installation has a bug given that the default install path results in a broken system. Question is, is there a bug already reported (I couldn't find it), or else, which package should I report the issue against? End result should be basic install does not require editing after boot to fix the network.
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
I have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies View RelatedI recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X
PEAP
blank anonymous identity
no CA cert (I suspect this might be the problem)
PEAP v 1
MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
I'm trying to setup OpenVPN in order to connect back to my home network while traveling for secure browsing and such. However, before I can even start trying to set that up I tried to see if I could open port check my computer through the net. And I'm having a hard time doing that.
As far as I can tell, here are my roadblocks:
1. Is ISP (Qwest) blocking my ports?
2. Is my modem doing the proper port forwarding and firewall?
3. Is my router doing the same?
4. Is my firewall on the computer allowing the request?
To minimize sources of error, I've turned off my local and router firewall and setup my router to forward ports. I'm not to familiar with my modem, but I'm pretty sure that the firewall is turned off by default and I think I've done port-forwarding correctly. But still no success when doing an open port check. At this point I don't know how to diagnose the problem.
I am interested in setting up a webserver on a PC I have laying around...more for the experience and knowledge of learning it from scratch. I have used dedicated servers before with webhosting, but did not do the installations of apache and other items. The server we had purchased had CentOS installed.
My question is, can I use this desktop I have to simply install the CentOS DVD torrent off their website, and start from there, with installing apache, and all the other items associated with a server environment to test/play around, or is there a difference and something I am missing with my plan to do this?
The end result will be having my desktop setup as a "server" I can ssh into and screw around with just to learn more about it.Sorry for the basic question. (i posted this here instead of the "newbie" section, since i figured it would get moved here)
I have just installed ubuntu from the ubuntu website for my laptop. Its great. Whatever i read or do though i cannot connect wirless to my bt home hub.
View 9 Replies View RelatedI am new to Ubuntu and have been trying to make a remote connection to my home server. I think I almost there. Here's what I have done:
1) Installed Ubuntu Server 10.0 on a Pentium 2 with 256K
2) Installed SSH, MySQL, desktop GUI and enabled remote access
3) Port forwarded my Lynksys to 5900:22 and 80
4) installed Putty and TightVNC Viewer
5) Obtained a DynDDS account
My interanl IP Addy = 192.168.x.yyy
My External IP Addy = 76.xxx.y.zzz
When I run Putty, the connection times out (which I am guessing that my server may not be setup correctly). Since I am configuring all this at home, I am unable to simulate a true remote access unless I go to an outside location. Is there a way to test my connection from outside my network rather than waiting to login remotely from a place other than my home?
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View Relatedtoday I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
I am running Fedora 12 as a Guest OS using Vmware Player. My host OS is Windows 7 Pro. I have no problems connecting to the internet with Fedora 12 using Firefox as browser. My problem is that I can't connect to my home windows network "Workgroup" I am using NAT and dhcp for IP. When I checked the network device tab it shows eth0 non active. Hardware tab shows eth1. I tried to activate eth0 by using "ifconfig eth0 up " it returns no such device. I then tried "ifconfig: and it returns eth1 and lo but eth0 was not there. Host network adapters shows 2 virtual adapters ...WMware vmnet1 and vmnet8. What should I do next?
View 14 Replies View RelatedI just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.
View 12 Replies View Related