Ubuntu Installation :: Trying To Remotely Connect To Home Server
Sep 20, 2010
I am new to Ubuntu and have been trying to make a remote connection to my home server. I think I almost there. Here's what I have done:
1) Installed Ubuntu Server 10.0 on a Pentium 2 with 256K
2) Installed SSH, MySQL, desktop GUI and enabled remote access
3) Port forwarded my Lynksys to 5900:22 and 80
4) installed Putty and TightVNC Viewer
5) Obtained a DynDDS account
My interanl IP Addy = 192.168.x.yyy
My External IP Addy = 76.xxx.y.zzz
When I run Putty, the connection times out (which I am guessing that my server may not be setup correctly). Since I am configuring all this at home, I am unable to simulate a true remote access unless I go to an outside location. Is there a way to test my connection from outside my network rather than waiting to login remotely from a place other than my home?
View 9 Replies
ADVERTISEMENT
Mar 7, 2010
I have 5 PCs running windows XP and I want to remotely connect to a server that has Ubuntu.
I want all of them to have their own passwords and own desktops something like Remote desktop in windows and each one can run his programs separately.
View 7 Replies
View Related
Apr 5, 2011
How can I use SSH to connect to my mysql server remotely? SSH connects on port xxxx, so do I need to forward ports in the putty connection?
View 4 Replies
View Related
Jan 31, 2011
I'm running vsftpd-2.2.2 on Slackware 13.1 and I'm behind a NAT with a dynamic IP. I'm using pasv_address, which makes it necessary to have a crontab that checks whether my IP has changed, and if it has, edits the conf and restarts vsfptd. It's hackish but it works. I have also enabled FTPES on the same port that normal FTP runs. I have allowed only the 5001:5003 ports and I am aware that the recommented is 50 ports. However I never had an issue with the transfers since I'm the only user and have at maximum two simultaneous transfers.
I can connect remotely with FTP and FTPES with every client I tried but I'm having issues locally. FileZilla refuses to connect on FTP and FTPES. WinSCP can connect on FTP but not FTPES. Issues are gone if I enable pasv_promiscuous, which the manpage strongly recommends not to use unless "you know what you're doing". I don't. Why is this happening? And, can I fix the local connections without resorting to pasv_promiscuous?
Here is my config and log files from a failed local attempt.
vsftpd.conf
Code:
anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
[code]....
View 3 Replies
View Related
Jun 3, 2009
I succeeded in setting up a vnc server on a fedpra9 tested it locally and it was successfully connected but no connection done from other machine in the network , even though they can see each othervnc server is pingable se linux is disabled
View 9 Replies
View Related
Jun 14, 2011
I'm having issues with my SSH server.The server is running on a Slackware 13.37 machine, using the default SSH server software, which I believe is OpenSSH.On my Windows machine, I've tried connecting to my Slackware machine but can only do so using the external IP, not the LAN IP, instead I get a "Connection Refused" error using PuTTy. I've forwarded port 22 for both UDP and TCP packets to my Slackware machine.I don't really know what information you need so just ask me and I'll respond to the best of my abilities.
View 11 Replies
View Related
Jun 4, 2010
Tried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies
View Related
Sep 24, 2010
I have been using TightVNC (on XP) to remotely connect to my Ubuntu machine at home while in the office. This just worked. After upgrading to 10.10, I no longer can connect. Errormessage: Failed to connect to server (my ip) Looked at remote desktop settings, but these are not changed. Port forwarding is working and I use an internal fixed ip, so I can't imagine this being a problem (I doublechecked it anyway!). Anyone seen similar behavior> And, more interestingly, anyone know of a way to fix this?
View 4 Replies
View Related
May 31, 2010
I have a server at home running as a file server and DHCP connected to a switch with a wireless AP in there as-well. with this setup I can access the files and do some configurations via SSH on the actual server anytime I'm able to get the wireless signal, now lately I felt the need to be able to do the same but this time over the internet. I've read somewhere already that I'm gonna need a router with port forwarding and NAT, then know the IP address of the server but my problem is once you start talking about routers then you need broadband connection which is something I don't have. Getting a router is not much of a problem but without ADSL like connection I guess its useless, what do I need to do?
View 7 Replies
View Related
Sep 22, 2009
I try to use fedora 11 as my home server. The server should be remotely managed by VNC. A normal VNC-setup does not allow to log into the login screen, but that is what I need !!
Notice that I would like to maintain the sever using the normal gnome gui. I have been investigating lots of options to get VNC running this way, have been searching all over, but did not find any working solution. All solutions I found where based on XVNC which is not available for fedora 11 as far as I know.
View 1 Replies
View Related
Oct 22, 2010
Just set up my home server (xubuntu 10.04), its wired to my router. I can connect to the server on my laptop (10.10 ubuntu) via Ethernet, but how do i go about connecting wirelessly?
View 2 Replies
View Related
Oct 31, 2010
the title of this thread said it all. I've never ever seen a server (unless I've never paid attention) nor used it in my entire life. Having that said, I think you know I'm level 0 when it comes to servers.I start reading here:[URL]Also, I found two threads here which answered couple of questions I had.What I'm planning to do and why?1- Have a home server. I always had that idea of having one sever at home and connect all the other machines (PCs/Laptops) to that server.2- Backup.3- Sharing Files, Pictures, etc.
4- Connect to the interent through the home server. I live in a big house and we have only one ADSL Router/Modem. Obviously, I can't access the internet from any room unless I'm close to the router. The server will be in a place where I could connect to the interent even if I'm very far from the router.5- I've never used Servers before so I'd like to try it now especially I started to use Linux and stopped using Windows and yes, I don't want to go back to Windows no matter what.
My Hardware:In my signature, you can see some of my hardware but I'll list them here:MB - GigabyteIntel P4 @3.00GHz2GB RAM500 SATA HDDLAN - Built inWireless Adapter - D-LinkADSL Router - CableWireless (the brand name)Laptops - Not mine but will be connected to the serverMy current PC has 9 OS's installed (Multi-Boot System). Other laptops have Windows and I'm planning to use Linux on one of them which is PII with 64MB RAM and 4GB HDD.y Questions: Again, this is my first time so 1- Do I have to remove all the other 9 OS's and keep that PC solely for Ubuntu 10.04 32-bit Server? or it's OK to keep them? If yes, then shall I be able to boot into Ubuntu 10.04 Server after choosing it from GRUB2 Menu?
2- I read about Server Types but as mentioned above, my usages are limited and I don't need Web Server, Mail Server, etc. So, do I really need a Server (Ubuntu 10.04) OS to do that? or Ubuntu 10.04 Desktop Edition is up to this job?3- I guess this should be the first Question. Do I need any particular skills to deal with Servers? or just general knowledge will be enough?I believe in one thing. No matter how much you read about something and learn, the real experience or the practical experience is something else.When you do something by yourself, you will never forget it.
4- Probably this is same as Question #2. I'm very bad in CLI I know very few commands only and I know that GUI is disabled in Servers OS. How hard that could be for someone like me? I read a reply by a friend of mine (HermanAB) at one of the threads here. He said if someone wants to use GUI on a Server then it's better to use the Desktop Edition. Thing is, I'm very interested to try and use a server but as I mentioned, I'm very weak in CLI.5- If Ubuntu 10.04 Desktop Edition could offer all the tasks I want (listed above) so what exactly do I need to know/learn?
View 9 Replies
View Related
Jul 31, 2011
I've set up a PC installed with Ubuntu 11.04 on my home network, given it the name "server" and given it a static IP of 192.168.1.200. I've created a file in the home directory called "Public" and set it to be shared with everyone, basically a chmod 0777 situation. Now, how do I connect, or map out that folder from another ubuntu 11.04 machine? I know how to do it in Windows, just hit "run" and type in "\server" and blamo, I can see everything that's shared on that machine. I can't figure out how to do this with Ubuntu.
View 5 Replies
View Related
Apr 20, 2010
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies
View Related
Mar 26, 2011
I am wondering if there is a good application that would allow me to setup a webcam at home, so that if I am at work, I could launch an application my android phone (or via a web browser) that would allow me to view & HEAR what is going on. It would also be neat if the application running on the home computer could be smart... ie: start recording if there was a loud noise & send an email alert ... or similar I havent purchased any hardware... but was thinking a (USB) for the main and an additional wireless (w/infrared) for being able to move around.
View 1 Replies
View Related
Feb 4, 2010
I have just installed ubuntu from the ubuntu website for my laptop. Its great. Whatever i read or do though i cannot connect wirless to my bt home hub.
View 9 Replies
View Related
Jun 3, 2010
This is my first ever time trying out a Linux based system and I would like to ask a quick question. When you plug in your cd/flash drive it comes up with the option to try Ubuntu before installing it on your hard drive. When I go to try I can't connect to my home network. Is this because it is in the try mode? Or something else?
View 4 Replies
View Related
Aug 9, 2010
I have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
View 6 Replies
View Related
Mar 22, 2010
i have ubuntu 10.04 lucid i used gnome-file-share-properties to enable remote desktop i have samba i have ping from remote computer to my ip address and computer name and etc but still i can't connect remotely via rdp or at least not via windows xp rdp what do i need to fix to enable this?
View 9 Replies
View Related
Oct 28, 2010
I use Xmanager to connect to a linux machine (ubuntu 10.10). However there is no display. Here is the log:
Code:
[13:43:27] Connected.
[13:43:28] Version exchange initiated...
[13:43:28] server: SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu4
[13:43:28] client: SSH-2.0-nsssh2_3.0.0011 NetSarang Computer, Inc.
[13:43:28] SSH2 is selected.
[Code].....
View 6 Replies
View Related
Aug 30, 2010
I'm running Ubuntu on a Zotac home theater PC. I wish to connect from another PC prior to login. The reason is that the home theater system has no convenient display. I've succeeded in getting a connection prior to logon from a PC using TightVNC. I've also tried Teamviewer running in Ubuntu without success. I'm now experimenting with X windows, but it seems complicated.
TightVNC is working well ecept that it opens a new session and I'd rather share the same session on Display 0. how best to connect to my Ubuntu home theater PC prior to logon and share the same session.
View 8 Replies
View Related
Jul 22, 2011
System hostname Server Operating system Ubuntu Linux 11.04 Webmin version 1.550 Time on system Fri Jul 22 09:23:44 2011 Kernel and CPU Linux 2.6.38-10-generic on i686 Processor information Genuine Intel(R) CPU 2160 @ 1.80GHz, 2 cores
Every couple of hours I am unable to ssh or vnc in to my system or anything else. I can remote into another PC on my LAN and everything works fine. The only things that fixes the problem is restarting the system. Could someone point me in the right dirrection to start trouble shooting this problem? I am still learning where all the log files are and I am generally new to linux
View 2 Replies
View Related
Jul 12, 2010
i have a computer at another house that i would like to controll from my house (both run ubuntu lucid lynx) how do i connect to the other computer using the viewer and remote server pre-installed in ubuntu
View 2 Replies
View Related
Jan 15, 2011
I have my Linux box in my Lan environment. I want to connect my Linux computer remotely from my windows PC using command line . how can I connect it remotely over the Lan ?
View 1 Replies
View Related
May 25, 2010
Just throwing in a quick question to see if anyone got any ideas about this.I'm unable to create a remote X session with TightVNC viewer. The local computer is a windows XP box and the remote server is running Slackware 13.
Using Putty on the XP box to connect to Xvnc through a ssh tunnel works just fine. However, when I fire up TightVNC viewer and try to connect to 127.0.0.1 as I'm used to, TightVNC viewer is unable to establish a connection to X. I'm puzzled.
This has worked when I used another XP box as local computer. I'm running all within my LAN. Can this be a firewall/iptables issue? I've obviously posted this in wrong forum category. Sorry about that. Starts this thread in server category too.
View 1 Replies
View Related
Feb 15, 2010
RedhatEL5(as guest) in Vmware ace, installed Samba, when:
#links http://localhost:901 ENTER
It works
but not with
#links http://127.0.0.1:901 ENTER
hence can't connect remotely from XP(host Computer).
Restarted accordingly, xinetd, with IPtables stop, #/etc/xinetd.d/swat file(disable = no) etc. How to fix this?
View 8 Replies
View Related
Jan 11, 2011
I just succesfully installed Centos 5.5 64bit with following package:
- httpd 2.2.3-43
- php-mysql 5.1.6-27
- mysql 5.0.77-4
and all these packages are running ok.
My question is how do i connect from Centos to another MSSQL server using PHP? I had read several article but cannot find the best way to achieve this because most of the instruction seems to be quite complicated. I found somewhere in this forum that all it need just this simple command: "yum --enablerepo=extras install php-mssql freetds". While others article said that i need to install "FreeTDS" and some ODBC driver. I'm a little bit curious since most of that article are using an older version of Centos and PHP.
View 10 Replies
View Related
Sep 20, 2010
I am having an issue with Ubuntu 10.10 and VNCServer. I can connect to my Ubuntu box remotely with VNC, but if I type any character anywhere, it closes out the window I was typing in. I dont seem to have a problem clicking and opening windows and applications, I just cant type anything into them without the window closing. Has anyone seen this behavior and know what the fix is?
View 4 Replies
View Related
Dec 26, 2010
I keep getting this error trying to connect to newly installed postgres server on Amazon EC2 running Ubuntu Maverick Meerkat....
Could not connect to server: Operation timed out Is the server running on host "....ap-southeast-1.compute.amazonaws.com" and accepting TCP/IP connections on port 5432?
I've updated config files, as follows...
pg_hba.conf
added
host all all 124.168.242.0/24 trust
where 124.168.242.0 is the IP range of my ISP
postgresql.conf
listen_addresses = '*'
port = 5432
I am attempting to connect with pgAdmin 3 client. I don't think the problem is the client.
View 6 Replies
View Related
Jan 18, 2011
I am trying to connect to serial console, local one, just to verify than it works, is is possible?Well, I configure serial console
Code:
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
[code]...
It is started, now I am trying to connect to the console via minicom, is it possible from machine where the console is running?If not, how could I check it remotely?
View 4 Replies
View Related
