Sometimes I would like to start XBMC on my media center using my laptop. I manage this system fully via SSH, but there is one thing that I don't know how to do, or know if it is even possible. I would like to start XBMC from my laptop so that I don't have to reboot the machine in order to do that (XBMC launches upon boot). Is it even possible to launch a GUI on a remote computer using SSH, and if so, how?
View 9 RepliesI'm having a problem booting Ubuntu. Last time I used Ubuntu I did 2 things that might have caused this:1- I added a repository to my software sources:
Code:
deb http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu (lucid main #xorg-edgers PPA)
deb src http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu (lucid main #xorg-edgers PPA)
[code]....
I'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
Is it possible to instruct Ubuntu to start up (GUI) Graphical User Interface mode from (CLI) Command Line Interface mode? In the old days, you can type "win" in DOS to get into Windows - something along that line. Is it possible for Ubuntu in this case?
Yes, you can reboot to switch between the modes, but shouldn't there be a command for this?
My ubuntu does not start up and give me a message contains the following options:
Run ubuntu in low graphical mode
Reconfigure graphics
Troubleshooting
Exite to login screen
And by default the first option is selected
I tried each but without result
How I could retrieve my ubuntu to work?
Is it possible to use ssh to launch a program and it's gui on a remote computer? I've tried connecting with ssh -X computer@ipaddress but when I launch gedit it loads on the local computer
View 9 Replies View RelatedI forgot to run a GUI process on a remote computer. I need to run the application as if I was at the computer i.e the application needs to open on the desktop on the remote computer.
I can connect to the computer through an ssh tunnel via another computer at the remote site and run non GUI based processes using Screen or bring some GUI programs to the computer I'm working from using the ssh -X option, however, this is not what I'm looking to do.
On Windows I used to use a program from sysinterns called PsExec which would let me start applications such as Word on the remote computer and I'm hoping that there is something similar on Linux.
I have an ssh question that I have not been able to figure out.
I am sitting in front of computer A on computer B I would like to start mplayer and have it display a movie on computer B's screen. I think a better question might be how do I start a gui application and the Desktop on a remote computer threw ssh.
I am running Slackware -current and am using kde as my desktop environment. I'm not sure if this is a feature that I turned on my accident or a bug but its really annoying. When I start any program on the computer and it goes into the Task manager bar. If I click the bar to maximize the program or window it goes to the kde log on window. I am running KDE version 4.5.4.
View 3 Replies View RelatedI want to switch to Ubuntu 9.10 but the computer always freezes 30 to 45 seconds after entering the graphical mode. This includes the 64bit installer, the 64bit live CD version and I even installed the 32bit version with the alternate install CD (text-mode). In all 3, I can use the system (e.g. log in, click Next) just fine for half a minute, then it crashes. It even crashes if I don't do anything.
Here are my hardware specs:
MB: Biostar TF560 A2+
CPU: AMD Athlon 64 X2 Dual Core 5000+
RAM: DDR2 800 Dual 128 bit, 2T (4GB)
GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS as well as removing all hard drives and the problem persists. I have also verified the CD successfully. Note that right now I'm using SLAX from a CD as I formatted my hard drive (so at least some Linux works).
I have kubuntu 9.04 installed in my computer and I am normally using a Gnome environment desktop (though I get back to KDE or Xfce if I have any troubles with Gnome)
This afternoon I restarted my computer and since ever I am unable to log in. I press the on button, get to the partition page and select Ubuntu 9.04 and the computer shows the login page
however, once I type in my password, the computer tries to log in but then brings me back to the login page asking for the password again. I have tried to login as Xfce, Gnome, KDE, Failsafe mode and the result is the same. The only way to get through is to login through the terminal, but then I am unable to get back to the graphical mode.
Has anyone else here had a problem getting virtual terminals to work when booting into F15's 'graphical mode'? This is what used to be runlevel 5 in the old SysV init system, before the switch to systemd. Before F15, I could do a Ctrl-Alt-F[n] (for n=1,...6) to get virtual terminals while in runlevel 5, and this was easy to control by editing /etc/inittab.
But with systemd, /etc/inittab is no longer used, and finding where the virtual terminals get created took me a bit of time. I tracked it down to the /lib/systemd/system/prefdm.service file, which seems to stop creating virtual terminals after tty1 in order to prevent the display manager and plymouth from conflicting on that virtual terminal. I'm using the Slim display manager (installed via yum), and I only got tty1 (showing console messages), tty2 took me back to X, and there were no tty3-6 any more. I noticed from ps that there was some kind of "plymouth --wait" process running, so I killed it. After doing so, the other virtual terminals showed up. Has anyone else here experienced something similar?
It appears that /lib/systemd/system/plymouth-quit.service is not exiting properly, and this is causing the problem. This problem only occurs in graphical mode, not in console mode (what used to be runlevel 3). My first solution was to put "/bin/plymouth quit" in /erc/rc.d/rc.local, and upon rebooting that did indeed fix the problem. But eventually I just removed plymouth altogether, which also fixes the problem. It would be nice though if plymouth-quit.service just worked as it was supposed to. I'm just wondering if anyone else has seen this problem.
I was reading /usr/share/kde4/config/kdm/kdmrc and see this 3 lines:
# Allow root logins?
# Default is false
#AllowRootLogin=false
this doesn't mean that root can't login in a graphical mode? (I can login as root)
[Code]...
I was using win-7. I tried to install RHEL 6 today. [dual boot]/ = 40000 MB and /boot = 1000 MBThe installation completed successfully.The problem is that it is not showing the graphical mode. Only the terminal mode is available. I tried chvt 1-7but I am unable to go to the graphical mode. It is not appearing.What should I do? System config:MSI CR420 Laptop.ntel core i3-350MEdited after following user76871's answer:There is no Xorg.0.log file in /var/log/, There is no xdm in /etc/init.d/, there is no kdm also.I tried startx that also didn't work. I tried system-config-display but the display is not available at system-config-
View 2 Replies View RelatedI have just been using distro's that install with a graphical interface, but some of the distro's forum members recommend are installed text mode only. How difficult is a text mode install
View 9 Replies View RelatedNeed your suggestion for below issue :
Operating System : LINUX RED HAT 9.
Problem :
The OS reboots normally.
and monitor stay on upto before getting into graphical logging window.
Once it try to get into graphical logging mode, the monitor keeps on and off
I can access Linux Box remotely. The server is fine.
I cannot get into logging prompt locally.
It was working fine before.. I am not sure if I have made any changes.
How can I reset to default settings so I can get to logging mode locally.
Having turing power off on Bios will that help ?
Could anyone telme how to go from text mode to graphical without restart.i know we need to change in /etc/initab as runlevel 5.but i want to do this without RESTART.is there any method.currently runlevel is at 3.PLZ TELME I CANT RESTART BCZ ITS PRODUCTION SERVER.
View 7 Replies View RelatedI am facing the problem that when I login to the machine in graphical mode the machine get reboot and same time when I login to the same machine through ssh using another machine, it is successfully login to that machine,and also ,if I do ctr+lalt+f1 and login to the machine in text mode it also works,
I am using Centos 5
I am trying to launch the IBM installer on RedHat ES 5.2 and getting "the installer is unable to run in graphical mode". I am able to do xclock and made sure the export Display=:0.0.
View 3 Replies View RelatedFresh installation of Fedora 14 x86-64 on Lenovo T510. I'm trying to setup graphical remote connection to this laptop via VNC. I installed vnc-server package and altered /etc/sysconfig/vncservers accordingly:
Code:
VNCSERVERS="2:awajda"
VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -localhost"
I found Remote Desktop which opens vino-preferences and ticked the check boxes there. I started vnc-server and then I tried to connect to it from the same local host using vncviewer. I got no errors and the window with correct resolution came up. The problem is - that window is black and empty. I tried looking into Fedora docs but I haven't found anything useful there. I tried google and I found about 487693746874363 solutions and different ways of installing and configuring VNC server. I tried a few - none helped.
I wonder if there is a decent and consistent documentation about how to make remote desktop working in Fedora without having a real pain in the ass trying out those gazillion tweaks and tricks from various forums and blogs? After all Fedora 14 comes with that Remove Desktop thing available out of the box. Is it a real working thing or just a marketing Should I uninstall all the preinstalled VNC stuff and follow one of those painful instructions found on the internet from A to Z praying for it to eventually start working after all the magic is done and hours or days are wasted?
I had an old SuSE installation (v9 or 10, I forget) on which I used to remotely login to a kde session using xdmcp. I blew this away and installed 11.3, and I just can't get it to work. I'm pretty sure I've enabled all the things I should have. there a bug?(Incidentally, I had the same problem with Ubuntu 10.10 (with Gnome), and eventually found I needed an updated version of gdm. With X tunneled through a PuTTy ssh session I can display individual X windows no probs. Also, a VNC session is rejected out of hand.)
View 9 Replies View RelatedThis is my first post here. I hope someone can help because I'm quite frustrated by now. I'm trying to write a bash script which will start a graphical app on our Ubuntu compute servers via X. I'm using a loop like:
for machine in 1 2 3 4 5 6
do
ssh -X computer-$machine "xeyes" &
[code]....
When trying to run a graphical application at a remote host i get the error
Xlib: 'connection to ":0.0" refused by server'
Xlib: No protocol specified
How to address this?
Problem installing graphical mode of red hat 5 on virtual software. But text mode is getting installed but its also taking more then 1hr. I've adjusted all the recommended options regarding memory,hard disk ,etc. Also please suggest me good virtual software for red hat enterprise Linux 5.
View 5 Replies View RelatedI had tried to install Centos 5.3 using the graphical interface but it gives me a black screen with no response. I've read into it and installed in text mode but still need a graphical interface. Whats the command/steps I need to take?
View 1 Replies View RelatedI have a really old Dell computer (Dell PowerEdge 1300) that I am wanting to use as a small server (samba file server and apt-cacher-ng). I installed Ubuntu server and then did "sudo apt-get install --no-install-recommends ubuntu-desktop" which was a bad idea because it killed the performance.So here is my question.Ive read you can split the X client and server. Would that let me run a graphical program (like Synaptic) over X without installing any sort of GUI on the Dell?If that is the case, how would I go about doing so?If I would still have to install a GUI on the Dell, what are other options since the on-board display adapter seems to struggle with graphics?
View 3 Replies View RelatedWhen I start my ubuntu linux system it automatically logs into a user (not root) in graphical mode and it does not asking for any password. when I try to go to the command prompt the password is required. How do I give password for my user. The provider installed the system and not me..
View 5 Replies View RelatedI have a web server that hosts multiple websites. Am looking for an application that can be run on my workstation and makes it possible to watch Apache logs live.
It should have a tabbed interface. When I launch the application, it has to connect to my server and should automatically open all access.log and error.log files and display all changes in real time (similar to tail -f command).
Does anything like this exist?
I'm tired of logging in many times in Konsole and executing tail -f commands to see parallel logs.
I have a dedicated server which runs a game server. On that dedi, I had Debian installed, and I wanted to have graphical access to it so I installed Gnome and nxserver. I want the game server to run automatically when the server boots up and have it appear in a console window when I connect to nxserver. So I added it in the Startup list by going in System > Administration > Session.
My problem is that the program doesn't start when the system boots up, but only when I connect to nxserver. So I assume it is something like gnome not starting up or opening a session until I open one remotely or something such.
But is there anyway to have that game server start in a console window when the system starts up? I tried using init.d but the problem is that it doesn't open any window, and I need to interact with the server through the console. What can I do?
Does Fedora 11 gnome have that gksu graphical authentication program which allows a normal user to open tools such as that NTFS Configuration Tool to enable full ntfs write support ? I did try to find it with both yum in a terminal, and the package manager, but is not found.
View 11 Replies View Related