I installed Ubuntu 11.04 side by XP pro. When systems boots up it goes to a screen listing 5 choices to boot into. Ubuntu first and XP pro last. I set the delay start time to 30 sec. and the XP pro as the default OS using the start up manager. THe default delay works and waits for a key press, but the order of the list has not changed and the highlighted OS (ubuntu) is what starts if no key is pressed. How can I fix this?
My comp came with Vista and then I installed Ubuntu, so it's dual boot. When I start up the computer, it eventually opens a screen with the options to boot Ubuntu, Vista and 3 other partitions. Ubuntu is at the top, Vista at the bottom, and it gives you five seconds to pick an OS or it automatically starts Ubuntu. This is very annoying because I almost always need Vista and I have a habit of pressing power and walking away and letting the computer load. Is there a way to have Vista be the default selection?
I am now dual booting between Windows 7 and Ubuntu 10.04 When i turn on my computer it goes to a GNU Grub screen where i can choose an OS to boot, in 6 seconds it auto chooses default. How to i change the default from Ubuntu to Windows? I have tried to edit the grub.cfg file but it wont let me [URL] i need the .NET framework for a lot of my studies so i need to default into Windows
I recently installed Ubuntu and I am dual booting it with Windows 7. I showed it to my friend and he likes it. He wants me to dual boot his computer with Ubuntu, also.We were wondering if there was a way to configure GRUB and that stuff so that it doesn't go to the GRUB boot screen when you start your computer where you pick an OS. We were wondering if you could set a default OS that the computer automatically booted to, unless you press a button at startup, and then you could get to GRUB to pick a different OS.
The reason being is because his whole family uses the computer, and we don't want to confuse them with GRUB every time they start up the computer. We just want the computer to boot to Win7 by default, but being able to boot into Ubuntu if you press a button to get to GRUB when booting.
I would like to be able to edit which OS is set as default on the first selection menu. I installed Ubuntu via windows xp. and have Grub 2 installed. When I start my computer, first I see is the BIOS, then I have a menu which allows me to select either windows xp or Ubuntu (windows xp is the default which I'd like to change to Ubuntu). Once I select Ubuntu, then I get the menu allowing me to select between the different upgrade versions.
From all the pages I read through on editing grub2 defaults, they only refer to the second menu that I get to pick between the upgrade versions or kernels (I think they are referred to). What I'd like to do is set Ubuntu as the defualt on the first menu screen, as Ubuntu is my preferred OS and it can load automatically, then I don't care what the default upgrade version is loaded (this i have understood how to edit).
I wanna use Windows Xp as default system because this laptop is not mine.I tried to use startup manager but it doesn't work. Do you know other way to choose the default os?
I have encountered a problem when installing fedora 12. 1- It told me that there is no sufficient RAM so it logged in text mode. But I have 256 mb RAM and the lowest is 192mb for the graphical mode. 2- The RAM specified in the manual of fedora the DDR or the VGA. 3- After the installation it ask me to log in as shown localhost login: What should I type in this? Whatever I wrote it ask me to write password. But if I try to write any thing in it, it didn't respond or write any thing. 4- How could I login the graphical mode after installation in text mode. 5- I have encountered another problem when boot the set it load fedora by default and didn't ask me to choose between fedora and previously installed windows xp.
I've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there.I've now installed Ubuntu (now updated to 10.04)so that it can boot to either OS.
It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7 (it's a work laptop and most of the applications are Windows-specific),
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
I am thinking about installing Ubuntu dualboot with Windows 7. However, I feel that it'd be a pain to select Windows 7 constantly as it is my main OS for work and school. Ubuntu would be for offtime tinkering and as such probably booted once or twice a week at most. I intend to use the system to use the OS not to use it for serious work. Before I install would it be possible to install it in Dualboot while maintaining the ability to boot W7 by default unless pressing a special key to come to the Grub bootloader or something like that.
I was struggling how to phrase the question (in the subject) so let me clarify... I wish to install Windows 2000 and then do Ubuntu, on the same PC. I never had a dual boot before but I understand that it goes automatically (after a short time) to default Windows if Ubuntu is not chosen (on the boot up screen), correct? If so, if there's a "countdown" of sorts, is there a way to disable it? I wish to have control over that aspect, have unlimited time during that boot "choose one" screen.
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):
I installed ubuntu lucid in a dual boot machine how ca i st the default boot to xp?i tried the instructions i found on the community docs but it did not work
I have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
I currently have a dual boot on my 160gb hdd, but even that feels cramped. i was wondering...I have a spare 40gb harddrive compatible with my laptop. could I just install the windows 7 installation there?
assumably i'd swap in the appropriate windows 7 hdd whenever i'd want to load windows 7 at Grub.
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code: Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
Everything is on my secondary (left) monitor. I want my primary (right) monitor to have the toolbars and default stuff on it. Is it possible? I haven't seen it on the settings and I've searched around but all posts are like 2007-2008 which have different layouts of solutions which don't work or aren't the same.
I would like to set Windows to be selected by default when i start my system (which has both Ubuntu 10.10 and Windows 7 installed).Tried some guides online but they suggested for me to change a file in /boot/grub/ named menu.lst but there is no such file on my system...
setting windows as the default OS when dual booting ubuntu. Have gone into system settings on both windows and ubuntus and chosen the option to boot windows vista first, but it has not worked.
When you install a dual-boot of Ubuntu, one of the frustrating things that you'll immediately notice is that Ubuntu is now set as the default operating system in the Grub loader. There's an easy way to switch back to using Windows as the default.
There are many way to change bootup options
This is one way to change bootup option
First you have to go system --> Administration and see for Startupmanager if it is not their
Now go to Applications --> Accessories --> Terminal and type
sudo apt-get install startupmanager It will ask for your password give it now It will ask Do you want to continue {y/n}? Type "y" and press Enter After installation is over close the terminal.
Now once again you have to go system --> Administration ---> now you will see a new Startupmanager button, just press that startupmanager button it will open a window
Enter your password to perform administrative task "now you have to give your password and press enter now you will see startUp-Manager window in that you will see Timeout
Timeout in seconds: by default it is 10 second if you want, you have to increase the second 10,20 etc.,
Default operating system: by default it is Ubuntu
if you want to change click the Tab and you will see five options that is
Ubuntu with Linux 2.6.35.22 generic Ubuntu with Linux 2.6.35.22 generic(Recovery mode) Memory test (memtest86+) memory (memtest 86+, serial console 115200) Microsoft windows xp professional (on/ext/sda1)
and now you go to Microsoft windows xp professional (on/ext/sda1) and click it now it will change Ubuntu to windows just press close tab after closing that window you have to restart your system just wait for 10 second and see now your system will boot windows xp by default
I tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
i was just wondering if there was any way to make it only boot ubuntu from pressing a button at startup like f11 or something instead of coming up with a menu asking me to choose which operating system to boot.
Have been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.