I was editing my fsck at etc/fstab/ after removing a hard drive and i think i commented out the wrong drive . now i just get a blank screen on boot. I have the ability to use my ubuntu cd for a recovery console, live desktop, etc.
View 9 RepliesI have a 2TB file-system and when the machine reboots it fails the fsck, halts and goes into maintenance mode.Stats: I have have RHEL 5, 2.6.18 kernel, the file-system is an ext3. The file-system is on an EMC AX4 connected with fiber channel HBA.So far my reading tells me this should work because under 2.6 4TB is OK. Any ideas why this fails?If I take it out of the fstab file and mount it manually the boot is OK and the file-system behaves well. I can change the fsck check option in the fstab to 0 but I don't think I should have too. Everything I read says that 2TB ext3 file-systems are OK.
View 5 Replies View Relatedall is well on my headless Lucid server until a recent apt-get upgrade && shutdown -R now ... it did not come back up? after i moved a screen to the other side of the house, i found fcsk waiting for input during the boot process errors on / ... (I)gnore / (F)ix " ...so i had to attach a keyboard just to push <F> i could change /etc/fstab so it never runs fsck, but this doesn't seem wise. how can i make it <F>ix automatically ? ( or maybe after Xsec )
View 1 Replies View RelatedWhen I do a forced fsck, I would like to have a log file to look at after boot.
When I check /var/log/ there are no files there with fsck output
I've run force fsck in these ways:
shutdown -rF now
-and-
touch /forcefsck
I am wondering if there is a way to manually trigger a file system check during boot by pressing/holding a key. Maybe there is already a keyboard shortcut built in to do this?I know that using tune2fs you can modify the number of boots (mounts) between file system checks, or even use "shutdown -rF" to reboot the system and force a file system checkAlso, I do not want to force the user to choose to run/skip the file system check during boot. For example, prompting the user with, "Do you want to run a file system check [y/n]?" each boot (or even each time the system thinks it should run a file system check),s not desirable
View 1 Replies View RelatedI need to boot in WXP just because the guys at the company don't want to update for Linux drivers in the TS so I can't connect from home unless I do it in Windows XP. But today WXP refuses to boot, when the progress bar appears, the system boots automatically. The WXP CD doesn't help, the repair console doesn't let me run chkdsk or anything (dir C: gives an error about listing addresses or something like that). Is there any way to use fsck or anything in Linux to repair the WXP NTFS partition?
View 1 Replies View Relatedi have the same issue but with a real install, not a vmware.every reboot fsck says that my main partition was not cleanly unmounted and check is forced.during shutdown the ubuntu does not show messages in a clear way but in random places. however, i am able to see the "/ is busy" message 1 second before reboot/off.my distribution is 10.10 upgraded from 9.10, 10.04
View 2 Replies View RelatedYesterday my computer froze using ubuntu 10.1 so i turned the power off, then back on, now i get this message when trying to boot: error unknown file system Grub Rescue>
I tried fsck from a live CD but it doesn't work.
Right now I am trying to fix the problems on my server with daemons not starting.
So I have to try different solutions and reboot.
The problem is that after 28 reboots, fsck kicks in and decides to check 2 TB of data.
Is there a way to cancel this???
It takes forever, and by the time it will be done, I will have forgotten what I was testing.
The issue of daemons not starting becomes even more frustrating when fsck decides that I must take a half an hour break.
So again, how do I cancel the fsck on Ubuntu Server?
I have my drives set to run fsck on boot up. This is the default setting for Fedora but if there is a problem it prompts me to run fsck manually. Is there a way to have Fedora just run fsck and fix any errors it finds on boot up?w in Debian distros you can put FSCKFIX=yes in the /etc/default/rcS file to do this. But I can't find the equivalent on Fedora.
View 2 Replies View RelatedI just installed 10.04 from the minimal install cd (twice), and when I boot it up, it runs fsck on the 3 partitions, shows they are clean, and then nothing. I can't even get to recovery mode. I had previously installed 9.10 fine on this computer. I can't even find out what the real problem is, even with the quiet splash disabled. It just stops after successfully running fsck.
View 5 Replies View RelatedToday for strange reason, one of my Ubuntu 64 bit server Linux VM failed to start ? it stopped in the FSCK scan status with the error as attached. few days back I've added new hard disk successfully and format it as sdb5 without problem.
View 3 Replies View Relatedi have a ubuntu 10 server (as server LAMP) , i was trying to repair a couple of unix files with fsck command on directory, thinking it would apply only that directory, but it affected all system, in th end it says: "file system has changes, restart ubuntu", then services go down, after some directories fail, restart funtion do anything... i switched on again, but at start show error.
I got another ubuntu and installed damaged hard disc, but, i can see file sytem, i has been trying to repaired with TestDisk but i can't...
i want to recover mysql database at least, but a don't know what to do.... how a fsck get damaged SO
I need to be able to login to terminal and I can't seem to find an easy way to do it from the login screen, or elsewhere that I would normally find in an older version of ubuntu. I need to run fsck with drives unmounted
View 4 Replies View RelatedI use debian jessie 8.1 and when i boot it, pc start fsck block clean etc.. but the fsck control is activated every on boot?
View 14 Replies View RelatedToday I did an update on my Debian 6.0.0 installation, which included a kernel update. I also did an Nvidia driver update, afterward. All well, until upon a third boot up an fsck check was forced (34 mounts). Some odd behavior ensued. At about 19% it exited the check, printed what appeared to be a load of inode numbers with error messages, and "froze" with the caps lock and num lock lights on the keyboard flashing.I did a couple of grub recovery modes, each which advanced a little further, and all is well again. However, it concerned me. Where in var/log do I find the file of that particular fsck activity?
View 1 Replies View RelatedI wanted to know how can I make fsck automatically fix HDD errors when it needs to check HDD during boot up and do not ask user for it . I found some of fsck related scripts in /etc/init/ and /etc/init.d/ but I don't know what to do with them.
View 7 Replies View RelatedI have ran into a bit of a problem. my server(10.10) is hosting a website with no problems whatsoever. I decided to install an extra hard drive, and format. i did both, and turned off my server after some more configuration. After a while, I decided that the new hard drive was a little loud for my liking, so I removed it. I had not put any files on it. I rebooted and saw a message that said this:Quote:fsck from util-linux-ng 2.17.2/dev/sda1: clean, 101202/2351104 files, 1516082/9393920 blocksI think that when I turned it off, it was formatting. How do I stop this from halting the boot? I can get by it by pressing the b or a key.
View 2 Replies View RelatedUPDATE: This is a bug: [URL] Evidently the problem is with plymouth because a workaround is to add "rd_NO_PLYMOUTH" to the kernel boot options. I don't get a prompt for my disk encyrption pass phrase---just a flashing cursor---but that's a small price to pay for being able to run fsck when the root filesystem wasn't umounted properly.
I have fully updated f13 (as of today) on a laptop with all ext2 file systems (It has nothing but flash memory.) If it's shut down without unmounting all file systems, it drops to a shell and asks for the root password to run fsck when it's rebooted. Every key press is treated as though it were <enter>, with a response to the effect that the password is incorrect.
Got tired of long waits for fsck on very large partitions.Here's a script to fsck selected partitions every 'N' shutdowns. No more boot delays for fsck (unless something is really wrong
Update1: On my system '/usr/libexec/gam_server' (gamin component used by xfce) prevented /home from being unmounted. I changed
Code:
[code]...
I have Debian Wheezy on my Dell Vostro 1710.
There is a fsck scan happening every 35 mounts on my laptop (i.e. when I boot)
It was fine until a few weeks ago when it started to fail.
Here is the error message :
What should I do to fix that ? I use my laptop to go on the Internet and I don't remember modifying/installing anything that could make this happen.
I found the answer : [URL] ....
I just had to type the root password and run fsck manually as follows : fsck /dev/sda7.
Is it still possible to use LiveCD to boot into rescue mode and run fsck?
I just want to run fsck on my hard disk and make sure all is well.
Does fsck provide and logs or records of what it found?
Is it possible to run fsck without LiveCD?
I was running 11.0 and it stalled in the middle of a number of updates. On reboot I now get (if I remember correctly) Error 15: File not found.I managed to get my hands on a 11.0 live cd and started trying to fix grub. However, when I try mounting the harddrive using "mount /dev/sda1" I got
Code:
can`t find sda1 in /etc/fstab or /etc/mtab
"mount /dev/sda1 /mnt" gives
[code]...
I use Redhat 2 server, the server suddenly can't boot now , it goes to the grub> mode, it can't boot to Redhat kernel
View 5 Replies View RelatedFsck is not check any file system which are not root file system at boot time.
Normally it run: /sbin/fsck -A -R -C -a
But this command doesn't do anything.
I've tried to strace it, and looks like this:
Code:
Fsck has been runningfor days. The problem seems to be multiply-claimed blocks. Example:
<filesystem metadata>
... (inode #365429022, mod time Wed Mar 24 08:48:23 2010)
Clone multiply-claimed blocks? yes
[code]....
When I boot the linux kernel 2.6 , I was kicked out and request to run fsck manually. After running fsck -y /dev/vg00/lvol3 and /dev/vg00/lvol4 and reboot, I still get the same error and request me to run fsck . I attach the console output in here .
View 4 Replies View RelatedCan anybody tell me what kind of fsck errors are found on a system?
View 5 Replies View RelatedHow can I change the automatic fsck execution at boot time to be above 30 boots? I reboot the system sometimes 3 to 4 times a day. Intel 3 GHz, tower, i386 lenny vmlinuz-2.6.31-686
View 2 Replies View RelatedI have $ uname -a
Linux kub 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux
Most of the time when I boot my PC I get an error about fsck.ext4: Unable to resolve... I don't know why it's happening.
The problem is happening with my external drive that has 3 partitions:
/dev/sdc1
/dev/sdc3
/dev/sdc2
About 90% of the time I boot I do get the error. Sometimes after getting the error I can login and the external drive (/dev/sdc) is already mounted:
$ df -H
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 15G 8.0G 5.8G 58% /
tmpfs 1.9G 0 1.9G 0% /lib/init/rw
udev 1.9G 246k 1.9G 1% /dev
tmpfs 1.9G 738k 1.9G 1% /dev/shm
code....
The UUID's in the error file match the output of the command blkid. And the UID's of blkid match the fstab UUID's. I don't know what to do at this point.