Ubuntu :: Script To Reconfigure Automatically Routing Tables?
Jul 3, 2011
i managed to make me a script to reconfigure automacitally my routing tables (wireless internet; wired a connected hotspot for my ftpd) now i need at last to remove line "2" from /etc/resolv.conf
when i try to
Code:
root@HP-Compaq-8510w:~# vi +2 --cmd "dd" /etc/resolv.conf
i get
Quote:
Error detected while processing pre-vimrc command line:
E492: Not an editor command: dd
Press ENTER or type command to continue
I have a samba server I had manually configured pam to use winbind in 8.04 I'm pretty sure that when I did that I broke pam. I had not choice at the time but in 10.04 there is a winbind pam module.How can I rewrite the pam configuration to use the default pam winbind configuration?
When I put sudo dpkg-reconfigure xserver-xorg into terminal then hit the return key it asks for my password which I put in, it then seems to do nothing it doesn't open the xserver page to make any changes.
I just upgraded my Ubuntu V10.4 LTS to Ubuntu 11. After that, I lost my external monitor and I cannot find those usual "preferences", "Administration" navigational menus on top of the screen.
Stumbled into Multiple Monitors under System, but it didn't detect the second monitor. However, the 2nd monitor was active and with system startup messages displayed there during reboot. But as soon as the desktop appear, that 2nd monitor lost its signal.
I recently attempted to change my ip with terminal using "ifconfig etho <input address>" but failed to annotate the previous address. I restarted the network after appending the network document at "/etc/network/interfaces" and restarted the network "/etc/init.d/network restart". Checking through I found the the IP address was what I changed it too yet the problem was attempting to revert it back.Going through a cycle of editing the network document and restart the network has ended in failure and I am curious if there is a way to reset the configuration for eth0 without reinstallation.
i'm newbie here.when i try to use gd in my web application,it says that i didn't install gd support.howto install php gd support to my existing php installation? i use php 5.2.9 for slackware.
Code: PHP Version 5.2.9 System :Linux jbendkck1 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686
i had a dualboot configuration of win7 ubuntu 10 on separate partitions no wubi.my windows system is encrypted so i had truecrypts password prompt then an easybcd selection for windows and ubuntu.i have got a back up of the truecrypts bootloader "last bootloader" no file extention.but how can i reconfigure the system since after upgrading i can only boot in ubuntu.what software should i use.
I use d-link to share network with my other PCs.PC is connected to D-link via Ethernet and I can't understand what should be written in /etc/network/interfaces to have Internet.I tried to add option "auto eth0" to /etc/network/interfaces butshould I alsough include? Or how can I reconfigure it manually.
My OEL5 system is using Oracle Unbreakable Linux Network (ULN) for updates. I would like to stop using ULN and use something like Centos or Fedora instead. Any recommendations on how I can do this
I copy all music to a single location (~/music) which makes it easier to backup and manage.However, Rhythmbox looks for music both here, and under the purchased music folder, which means that any music I have purchased gets listed twice - once from my music folder, and once from the purchased music folder.I have tried using gconf-editor to change apps/rhythmbox/library_locations to only include my music folder, however when next I restart Rhythmbox, the setting reverts to also including the purchased music folder.Is there a way of preventing this from happening?I only want "~/music" listed for library locations - I do not wish to include "~/.local/share/ubuntuone/Purchased%20from%20Ubuntu%20One".
I started with a Pentium4 system with a FX5500 AGP card and now have a i3 with integrated Intel video (Auburndale). The new motherboard is ASUS P7H55-M PRO. The monitor is a Acer AL1916 (LCD) with only VGA input. I have been using the nVidia oprietary drivers installed the "Debian way" (Cf using a Debian stable stock kernel.I first renamed xorg.conf so X would start without one. Once gdm starts, the monitor says the input is not supported. So I tried reusing the old xorg.conf file, changing the "nvidia" to "i810". X then fails to start and shows an error of no screens found.Everything is fine in text mode; only X is not working.I have to get this fixed very quick or I might not get to use Linux at work anymore.
Don't know what I did but while moving the cursor around fast, suddenly my desktop reverted to the default openSUSE 11.3 background (circles) from a custom jpeg image and all the icons disappeared. Rebooting did not solve the situation. Never had this happen before in over twenty years.Is there a way to restore the previous desktop or do I need to reconfigure everything?
i have tried to reconfigure evolution to send and receive e-mail,i am using verizon,i must have put in the wrong information,everything gets stuck in the out box,after trying many times i can not get back to the welcome to evolution to where i can reconfigure it back to where i can get it to work to send and receive and not stuckn the out box,getting a little frustrated,
I did the following command while I had my partition mounted and was not able to restart until i pulled the power. sudo dpkg-reconfigure linux-image-2.6.32-21-generic. Everything seems to be working okay now but before I start getting into 10.04 i wanna make sure i just didn't screw anything up.
ive been having trouble with my nvidia driver, so i ran "sudo dpkg-reconfigure -phigh xserver-xorg" in tty(the problem is that it wasnt going to my login screen, as soon as i turned on it went to tty) after i ran that it goes to theubuntu loading screen and is frozen
I have a Dell Windows7 PC configured with BIOS RAID1. I want to install SLES10 and configure it with Software RAID1. My question is: Do I need to reconfigure the BIOS RAID setting and if so What should it be.
I've replaced the Motherboard on a working Debian Lenny system but GDM does t come up: the grey screen merely displays with a wristwatch in the middle.I can find no messages. Running dpkg-reconfigure xserver-xorg and Xorg -configure don't help.
I downloaded php 5.2.12 package from gslapt package manager and i need to reconfigure it so that i can enable odbc module in php.. is there any way to do this? or should i just download the php 5.2.12 then compile it to my system?
I have a fresh install of Jessie, and am having issues with debconf.
I have been trying to change to mdm from the default lightdm display manager. I have downloaded and installed mdm (apt-get install mdm) but when I run dpkg-reconfigure mdm nothing happens. As I understand it, I should get a menu that lets me choose which display manager to use.
I also installed lirc so I could get my IR remote working again, but when I run dpkg-reconfigure lirc nothing happens. I am supposed to get a menu with various options to choose from.
I have tried dpkg-reconfigure debconf and this gives me the menu with different options to choose, like it should when trying dpkg-reconfigure lirc or dpkg-reconfigure mdm. I tried using dpkg-reconfigure debconf to choose different settings, such as gnome, or editor, but they don't work either.
I've given it the old college try for a couple years, starting with openSUSE 11.1 without success. I'm up to 11.4 now with no change or relief. My openSUSE box with NVIDIA proprietary driver and the default refresh settings of 80KHz/75Hz, has an annoying beat frequency with... something, somewhere, causing an annoying ghostly flicker on my trusty 1280x1024 LCD display. I can run both openSUSE and Windows XP on this hardware and they both have the same annoying flicker at those settings. However, in Windows XP, all I have to do is select a 70Hz refresh, resulting in settings of 74.6KHz/70 Hz, and the annoying flicker is cured... for Windows only, of course. I have tried to change these settings in openSUSE to no affect. In 11.4, I find that the advice is to create modelines using CVT and edit xorg.conf, but despite rigid adherence to instructions, there's no change. The monitor continues to see refresh settings of 80KHz/75Hz and the annoying flicker persists.
I hate to rag on openSUSE since it does so many things well, but there's a number of adjustments I'd like to make, especially the vertical refresh, that simply won't change, even when following documented or testamented procedures. Concentrating on the vertical refresh for now, is there anything that really works?
I've brought a friend over to linux from windows. He has some how deleted his "Wired Etho" connection. He said his computer would not shut down(Mint Linux 9), so he unplugged it. You guessed it right after restarting no internet. After checking under "Network Connection" his wired connection is gone. My question is? How to reconfigure a "Wired Etho" connection? He has a dsl connection running a Linksys router(sorry I don't know the model number). I have only talked with him on the phone, so I have not personally checked the system out. I just finished working on it this past sunday and everything was fine.
