I have been looking at the docs in the KDE help centre, but I prefer to store some reading on paper to refer to when away from the computer. So. I don't seem to be able to print from the KDE Help Center, since it's greyed out. Anyone know how to somehow get the docbook files out to my printer instead?
View 1 RepliesI'm running Slack 13.1 [32 bit] Re: pdfedit from SlackBuilds 13.1. I've installed qt3 per the dependencies w/installpkg. I've pointed pdfedit.SlackBuilds to where qt3 is and it's found fine. The problem arises when the build can't find docbook stylesheets. "checking for docbook xsl... configure: error: unable to find docbook.xsl stylesheet"
I've installed docbook.xsl where it can be found which is in the same folder qt3 support is found and verified my system can find it there,, which it does. I still get the can't find stylesheet error. Is this a glitch or am I overlooking something somewhere along the line?
Linux kernel 2.6, GNU, Slackware 12.0
KDE 3.5.7
How can I read .docbook files? If I click the name in the desktop, it asks me for an app to open it.
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
I'm completely new to DocBook, but am writing a few things I'd like to use it for. I'm looking to get away from the standard stylesheet (I'm using Ubuntu, and at the moment I use /usr/share/docbook-utils/docbook-utils.dsl). Is there anywhere I can browse different ones on the web to find one I like, that formats to HTML and PS/PDF?Am I even going about this in the right way? As much as I try and learn, I just can't fit it into my head how everything fits together with DocBook.
View 2 Replies View RelatedI'm trying to upgrade konversation to 1.3.1 and it fails with tons of docbook errors.
Last several lines of the build log:
I cannot print pdf files. I click print in evince everything seems ok but nothing comes out on the printer. I receive no error. I have a HP printer (LasterJet 3005n) attached over a network. I am running 9.10 on a Dell Optiplex. I did not have this problem in 9.04. I had this problem immediately after I did a fresh install of 9.10. I can print open office documents without any problem, just not pdfs. I have the same problem with my serval laptop (also running 9.10).
View 8 Replies View RelatedI've been having a problem with printing a particular pdf file from Evince. The pdf is opened and displayed correctly but when I want to print all I get is sheets with only punctuation marks on them. These punctuation marks correctly correspond to what is in the document but all the text in between them is not printed.
View 8 Replies View RelatedI often have a need for printing multiple files. Therefore I found a Nautilus script that would allow me to do this. However often many of the files a Microsoft Office doc-files. Since I do not really want to convert every single file (as that would defeat the purpose of bundle printing) I tried to figure out how to print these, as the commands "lpr" og "cupsdoprint" cannot process these. I have found a printing command using the CLI part of OpenOffice, but I cannot get it to do multiple selected files.
The command is:
Code:
soffice -p "/path/of/file.doc"
How can I use this in a Nautilus Script so I can print multiple files?
i have a problem with cups on a lucid/64 machine.
"Unable to write print data: Broken pipe"
The pdf-file to print has a size of 4,7MB. After sending the file to the printer the size of the file is more than 18 MB.
We use a Xerox WorkCentre 7232 which is via
socket://ip_adress:9100
connected to cups. The same configuration had been working fine for several years with hardy.
Cups refuses to print large files. When splitting up the print-file all works fine.
I can't print pdf files from the Ubuntu PDF viweer on my printer - I get a message that 'pdftorasterfailed'. My workaround is to print to file then print the postscript file. Annoying but it works. I did some searching and this is a known bug in cups for Ubuntu 10.04. The first thing I tried was a system update, that did update cups but it still fails. I found this link:
[URL]
and have the patch files, but how do I apply them?
I have had bad experiences using Evince and Okular to print SOME pdf files. For example I scanned a bunch of last year's medical records and bills to a pdf file using my scanner and Xsane. I can view the file but not print a page to my Brother laser printer. Same goes with my CITI bank Master Card statements. They appear to be images of the paper statement - not sure if that has anything to do with it.I had to resort to using a Windows 7 virtual machine running the huge bloated brand name Acrobat reader
Anyhow... this afternoon I built a VMWare virtual machine of the latest Ubuntu 10.10 beta. Setup my laser printer and decided to try to print one of my problem files. Evince did not do it. pdftops pegged the CPU at 100% and it stayed there until I killed it. Then one page came out with some not helpful error messages. I then looked in the Software Store and started down the list of pdf viewing programs. However, my plan was to keep trying programs until I found one that worked. Success came soon with ePDFViewer. It works on both 10.10 and 10.04 (my current desktop) and will print any pdf I have thrown at it. I am now a happy camper as far as pdf files are concerned.
My friend have a pc with only Windows. She does not want to format it for Ubuntu but wants to have a temporal partition (without deleting the original-rented Windows machine) for Ubuntu. How can incorporate the Ubuntu (no demo) without altering beyond her pc?
Second, How can she read files of Ubuntu (documents- ODT File (.odt)) in Windows? How can she print the doc's when the printer only works for Windows?
Third, how can be deleted the Ubuntu from her machine when she be able to return the pc to thye dealer?
Accidentally noticed that I am NOT able to print pdf files in Okular (Version 0.9.4, KDE 4.3.4). Clicked print and nothing happens, no error message.The same file CAN be printed using evince on the same system. I've created the pdf file using soffice so permissions is not a problem.However, the same file CAN be printed in openSUSE's Okular.If someone can confirm that I am right/wrong, then I can decide whether to file a bug report?
View 3 Replies View RelatedI have to write a script that accepts two directory names (JIIT, JUIT) as positional parameters and checks which files are identical in both directories and files having same contents are also considered as identical in same directory. I tried using diff:
#both directories contain three files...file1, file2, file3
echo "Enter the directories:"
read d1
read d2
cd $d1
if diff file1.sh file2.sh > /dev/null
then echo same 1,2
else echo different
fi
if diff file1.sh file3.sh > /dev/null
then echo same 1,3
else echo different
fi
if diff file2.sh file3.sh > /dev/null
then echo same 3,2
else echo different
fi
cd ../
cd $d2
.....
I used the same code in the other directory for the three files. This is not running. I also want to know what to do when I need to compare files from different directories. i.e., JIIT, JUIT..
1. lp file_with_english_chinese2. lp -ozh_CN.utf8 file_with_english_chineseThe normal ascii characer prints ok but the chinese character are blank.
View 4 Replies View RelatedI cant print html files using linux mandriva (Foomatic)
View 5 Replies View Relatedfile1: have DNA sequences and each sequence will begin with > symbolfile2: have protein sequence and each sequence will start with > symbolfile3: BLAST result of file2 and each result will start with query= .my problem is i have to make a report file by combining these three in such way that first sequence from file1,first sequence from 2nd file and first result from file3 should be printed in a report file
View 14 Replies View RelatedI have various text files -- some "source code", some "data files" -- that I'm formatting with enscript. Can someone answer some questions about use and workings of enscript?
1. How does enscript know which printer to use as a default? My command lines do not specify a printer but output makes its way to the system default printer. Neither PRINTER nor LPDEST are set in the environment. So what is enscript using to learn the default?
2. How do I get --landscape to work as an enscript option? Whatever enscript sends to the printer accomplished the N-up and other formatting, but the content appears portrait instead of landscape?
3. Running Ubuntu Lucid desktop, I also use CUPS and HPLIP for printing. Need to understand the interactions among the desktop CUPS and bash shell command line access to printing? I tried viewing the environment looking for printer and similar variables. 'set' showed a group of shell functions instead of environment variables. I'm confused.
Follow-up: The functions were all ImageMagick details. (blush) The variables went by so fast I missed them. Even so, I still don't find anything to tell 'enscript' which printer is default.
My Ubuntu Karmic install has a very useful Print-to-File Printer configured which allows me to generate Postscript and PDF files.
I have Windows XP running on Virtualbox and I want to be able to generate PDF files using this printer but there appear to be no Printers configured.
I'm writing a script using ksh that diffs two dirs that contain about 30 files, and writing the results on a logfile. When files differ, it writes the difference with no problem, but I also need the script to write a message if no differences are found.
View 3 Replies View RelatedInteresting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedJust installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies View RelatedI went to print something and I get this message: Summary: SELinux is preventing access to files with the default label, default_t.
Detailed Description: SELinux permission checks on files labeled default_t are being denied. These files/directories have the default label on them. This can indicate a labeling problem, especially if the files being referred to are not top level directories. Any files/directories under standard system directories, /usr, /var. /dev, /tmp, ..., should not be labeled with the default label. The default label is for files/directories which do not have a label on a parent directory. So if you create a new directory in / you might legitimately get this label.
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies View RelatedNot sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View Relatedis there any way of selecting several programmes for installation at once in the software centre, like in earlier versions of Ubuntu? I have to install about 150 things, and one by one is time-consuming!
View 6 Replies View Relatedfinally came across some rare ps games that i would like play on my laptop.
View 2 Replies View Related