Slightly New user of Ubuntu 10.4 It doesn't seem to matter what i try and install or uninstall all lead to similar error messages. (TRYING TO INSTALL I GET)
[Code]...
When I try to update with update manager
I'm running ubuntu netbook remix 10.10 here is the error I get every time I try to use update manager to update
Have received errors the last two times I've run Update Manager. This one says: Package Operation Failed
The installation or removal of a software package failed.
Details:
installArchives() failed: Preconfiguring packages ...
Preconfiguring packages ...
(Reading database ... (Reading database ... 5% (Reading database ... 10%
[Code]...
subprocess installed post-installation script returned error exit status 1 The last error said something about "Max Reports". What I can't tell is whether the updates actually installed.
Using 11.04. Every time I install a program (any source - software center, Update manager ) at the end of the installation message it says operation failed. But ... here is the big but. The software gets installed.
View 3 Replies View RelatedGreetings: I have tried installing Ubuntu 10.10 from disk and DVD at home in VMware Player 3.1.3 with success. However, when I go to do updates, the Authenticator freezes and comes up with the following error:
Code: Could not initialize the package information
[Code]...
while iam installing centos 5.2 i am getting following error :
LVM Operation failed vcreate failed for <fsset.partition device instance at 0xb7C1ef6c>
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
I am running Ubuntu 9.10 Karmic Koala, and I am having problems with GDB. When I attempt to debug a C program in kdbg or codeblocks, the output terminal will display this message: "warning: GDB: Failed to set controlling terminal: Operation not permitted" I have searched quite a bit and I have not found a fix that works.
I am running the latest stable versions of all my software supplied by the ubuntu repositories My system meets all the dependencies for KDBG and Codeblocks
I am running gnome, but the KDE files installed by Synaptic are version 3.5.10
I have KDBG version 2.1.1
I have GDB version 7.0-0ubuntu1
I have CodeBlocks 8.02-0ubuntu4
If anybody needs any more information in order to give ideas or knowledge on how to fix this just let me know
I get this error ALL THE TIME after a reboot if I try to print. Going to the printing applet to add the printer does no good because Lucid is not connected to the CUPS server. I found that the work-around below fixes the issue for the current session.
Code:
sudo aa-complain cupsd
sudo /etc/init.d/cups restart
[code]....
i get this error whenever i update or install/uninstall a package Package operation failed
The installation or removal of a software package failed.
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
[Code]...
After upgrading to Debian 8, I'm having a bit of trouble with systemd, since I'm not used to it (seeing as it was all init when I started). I tried to use a tutorial to create a new service and one step in it was to run
Code: Select allsystemctl enable xxx.service
Unfortunately, every time I run systemctl - even without parameters - I get this error:
Code: Select allFailed to get D-Bus connection: Operation not permitted
I am having an issue with HTTPS certification using curl. My curl is configured with OpenSSL. If the certification verification is failed I dont want to terminate the operation, instead I want to continue by just putting a log message. For this I have used OpenSSL SSL_CTX_set_verify() function to set my static C callback function. During HTTPS transaction, my callback is also getting called with first parameter 0 or 1 (depending upon of the certificate verification is success or failure). But even if my certification verification is failure, I want to continue. So I have hard coded to return value as 1 always from my callback function. But still I see the certification error and I don't get the page.
View 1 Replies View Relatedi have written one backup script in linux workstation.The backup script will do zipping files and moved to the backup directory(i,e /net/ts-bcn/sb_backup/sand). while moving zipped files to the backup directory i am getting some error like this #error:mv:failed to preserve ownership /net/ts-bcn/sb_backup/sand operation not permitted. i am getting the file owner and group owner as nfsnobody for the zipped files.
View 1 Replies View RelatedI am new to Ubuntu. I am using Ubuntu 10.10 I tried to install software (Gmail Notifier) through 'Ubuntu Software Center' I don't know why I am getting following error message :
(Reading database. 95%dpkg: unrecoverable fatal error, aborting: failed to read on buffer copy for files list for package `libtaglib2.0-cil': Input/output error Even if I tried to remove any software I am getting this error. Also when I want to change 'Visual Effects' to 'Normal' or 'Extra' through 'Appearance Preferences'.first it shows 'searching for available drivers' and then the message :
I just recently installed Ubuntu on my laptop and was attempting to install Wine on it this morning. I went through the proper procedure listed on the site, but once I get back to the Software Center and hit "install" it gives me an error a second later saying "Failed to Download Package Files. Check your Internet connection."
View 6 Replies View RelatedI was installing wine but my computer suddenly shut off and now the installation is corrupted and when I try to install it again through ubuntu software center it tells me
"The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software." How could I fix this??
i tried my first linux installation with Fedora distro. using the live 64 usb boot version, everyhing looked fine. BUT i had issues with WINE so by recommendation, i went with Ubuntu and flushed Fedora. So, technicaly, the install works fine, during the process of installing from the live usb 64 bit 10.4 ubuntu. BUT at the end, when installing GRUB, it just simply failed! thats's a shame for me what i can tell you is the following. (thats what i think is my problem, but i need some expert help tho!)
my motherboard is a ASUS, im using 3 HDD 500GB sata2 drive, configured as a RAID in the bios, strip 0. so it presents to the OS one partition of 1.5 TB. Fedora detected it correctly, and was able to install grub on that now, during the Ubuntu install, i can chose to pick up a partition that was not used on my 1.5 TB ( i reduced my partition to 1TB and allowed 500GB to linux). Windows 7 reside on the first partition. on this disk, partition 1 is a 100MB windows bootmanager. partition 2 is windows 7 itself 1TB.
during the install of ubunto, i tell him to create a / partition, using 480GB as the third partition, and i created a 4th partition as a swap for linux. the install process the information, install the DATA on the third partition... BUT grub, can't !!! it failed... it keep looking for a /dev/sda disk... when installing GRUB, i can chose the drop down, for the 1.5TB disk, and when i press OK, he just simply try again to access /dev/sda disk... which is full of course and within a BIOS raid..........
My normal update/upgrade of packages on a LAMP server (Ubuntu 10.04) for my business has resulted in the following error:
Code:
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.32-24-generic-pae /boot/vmlinuz-2.6.32-24-generic-pae
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 10
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.32-24-generic-pae.postinst line 1003.
[Code]...
I am needing to install the geda pcb layout package on my system. The one that is in the repository is a much older version, 20091103, and some projects I need to modify were developed using a newer version, 20100929, and the older one on Ubuntu will not open them. I downloaded the pcb source and ran configure and a couple of dependencies failed that I was able to correct with synaptic. But, then it complained about not having gdlib-config. Which I cannot find that in the repositories. What do I need to get?
View 1 Replies View RelatedI am trying to install eclipse via the synaptic package manager. The installation process failed and I tried manually as suggested
[Code]....
When I go to System/Administration/Hardware Drivers I have an error message:Downloading package indexes failed, please check your network status. Most drivers will not be available.After that I get the Hardware Drivers window empty..My network is working fine so I don't know whats the problem
View 9 Replies View RelatedFull error dpkg: failed to open package info file `/var/lib/dpkg/available' for reading: Input/output error
Runing 10.10 on USB.All was fine until a week ago then when trying to update I get that error.
Ive followed instructions in many threads to no avail. Heres what ive done and the result.
sudo apt-get update No error,all download fine sudo apt-get upgrade
Preconfiguring packages ...
dpkg: failed to open package info file `/var/lib/dpkg/available' for reading: Input/output error
E: Sub-process /usr/bin/dpkg returned an error code (2)
sudo apt-get install -f
dpkg: failed to open package info file `/var/lib/dpkg/available' for reading: Input/output error
E: Sub-process /usr/bin/dpkg returned an error code (2)
[Code]...
So apparently I've got a broken dependency and Ubuntu can't handle it itself. This is the error message I get when it fails to repair.
Unpacking dockmanager (from .../dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_i386.deb) ...
dpkg: error processing /var/cache/apt/archives/dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_i386.deb (--unpack):
trying to overwrite '/usr/share/dockmanager/data/skype_dnd.svg', which is also in package faenza-icon-theme 0.8
Errors were encountered while processing:
/var/cache/apt/archives/dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_i386.deb
dpkg: dependency problems prevent configuration of dockmanager-daemon:
dockmanager-daemon depends on dockmanager (= 0.1.0~bzr83-0ubuntu1~10.10~dockers1); however:
Package dockmanager is not installed.
dpkg: error processing dockmanager-daemon (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
dockmanager-daemon
How can I go about fixing this? I can't use the software center until the error is cleared.... :[
I apologize first because I do not know if this is the right section for my problem, but I could not find anything more suitable. I have an Asus 900 with Ubuntu Netbook Remix 10:04 In a nutshell: I realized today, trying to install a new program with Ubuntu Software Center, that I can not anymore authenticate myself as root. Of course I have not changed the password, but the old one is not anymore accepted ("Authentication failed").
The interesting thing is that I can install programs without problems (using the same old password) with the package manager in Administrative Tools (synaptic). Here, the authentication works well. Opening a terminal, I can use sudo to run any command by providing my password, with no problem at all. Following some guides found on the web, I reset the root password (supplying the same one as before) and everything went well. Only .... nothing has changed! Ubuntu center software authentication always fails.
What could have happened? Maybe I did some mistake by editing /etc/sudoers to solve another problem some days ago. Ubuntu told me that my username was not in the sudoers file, so I resolved it by adding to /etc/sudoers the line myusername ALL = (ALL) ALL
I checked the contents of the file and, apart from this line added, it is as it was before (I compared with that on another PC with Ubuntu). Can anyone make some sense out of it? Starting from the fact that the package manager does function ... but software center does not.
I'm using Ubuntu jaunty and was using old version of pidgin until today. Today I had decided to install newer version of Pidgin 2.7 and uninstalled my old version from system. Because it had so many problem like not login to yahoo account.
I went to Pidgin website and downloaded Debian package for ubuntu. But got an error while installing. Finally I decided to install it from source package and downloaded it to install. While I try to make configure file by typing
Code:
./configure
command, it gave me following error:
Code:
checking for update_panels in -lpanel... no
[Code]...
So I can not install Pidgin now. If I have to install it anyway I have to disable video and voice service for Pidgin. But I would like to use Pidgin with video and voice.
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
I have not been able to download either by Ubuntu Software Center or the package manager. I get: Failed to fetch [url] Not Found [IP: 91.189.88.30 80]
My Internet is fine.
Is the server down...and is it normal to be down for 3 days?
When I try to remove a package using software center I get this message : the package system is broken.
View 9 Replies View RelatedI just installed Ubuntu 11.04 but "whenever i try to download or install any software from 'Ubuntu software Center'it gives error: "Failed to download Package Files Check your internet Connection" Internet is working fine!I've also tried the command: "sudo apt-get update"
View 2 Replies View RelatedI'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
