Ubuntu :: Over Heat Message From BIOS On Reboot?

Mar 12, 2010

Everytime i reboot ubuntu karmic, or shut down then turn on later, it greets me with a screen that says "your bios has detected your computer was sent into hibernation mode due to overheating" of course this is not the case, and the message is very annoying, help? =x

I'm on an HP pavilion dv7

View 4 Replies


ADVERTISEMENT

OpenSUSE Install :: Reboot Freezes PC At BIOS Screen?

Sep 1, 2011

I have a problem where my PC will stop at the BIOS logo screen after a reboot. The keyboard and mouse don't get power ie no lights. I can power off / on and it will boot normally. The problem started after a fresh install and after installing the updates. ie before updates I could reboot and it was ok. I moved from Slackware and have Win7 and they don't have this problem. Also Ubuntu and Arch rebooted normally when I tried them. I have Opensuse 11.4 x64 on it's own HDD (Samsung F3) The system board is an Asus P8P67 Deluxe (Sandy Bridge) and the HDD is on a SATA3 port. Could it have something to do with the EFI BIOS? Would it be worth trying a newer kernel? it may better support my hardware. I'm hesitant as I don't want to break Lirc as it took awhile to get it working properly on the stock kernel.

Also where can I add '/etc/init.d/lirc restart' so I don't have to run it manually every time time I launch XBMC. I couldn't find 'rc.local'

View 7 Replies View Related

OpenSUSE Install :: BIOS Message - Fails To Launch From CD

May 16, 2011

Recently, for whatever reason (I am led to suspect a bad hard drive), Windows 7 failed to boot even in safe mode so I decided to just use a clear hard drive and install a far less troublesome OS, so I decided to try to use openSUSE. I used a backup laptop to download and burn the 4.7 GB release. Problem is, I haven't a clue how to get it to work. I thought just placing the burned DVD in when booting would be enough, but the BIOS keeps telling me it fails to launch from CD. Luckily, I had enough foresight to download a live CD just in case. I was able to install from the live CD, and when I checked the DVD, I was able to access all the content.

But I haven't a clue how to use it to upgrade/install all the extra software. Also, I should add I am completely new to this whole thing. While I have used Linux before, for the most part others dealt with all the administrative aspects of ensuring the system actually ran/had the needed software on it. Finally, I have one major restriction placed on this whole issue. I live out in the middle of no-where and the only internet I can get is limited to 200MB a day (I downloaded the CD/DVD elsewhere, but normally don't have a chance to do that). As such, being able to install from the DVD and not needing to download much software would be nice.

View 1 Replies View Related

General :: Error Message After BIOS - Unknown Filesystem

Dec 10, 2010

I installed Kubuntu 10.04 last couple days ago. Yesterday I installed some package software. After reboot, I had problem to login in GUI in Kubuntu. I tried few solutions in web I found,
Now It became more worse ! After BIOS - show this error message
error : unknown filesystem
grub rescue>

View 14 Replies View Related

Hardware :: Hwclock (BIOS): Time Set Wrong During Shutdown And Also Reboot?

Nov 15, 2010

System time was drifting ahead increasingly for several days time in the end. This is what I did with the clock about 6 hours "in the future":

Quote:

sntp -P no -r pool.ntp.org
hwclock --systohc

i.e. I got the (more or less) exact time from the time server and set the hardware / BIOS timer with this value.I renamed "/etc/adjtime" to beginn with a clean slate. During reboot (shut down phase) I noticed a message saying something like: "hwclock set to system time". I checked in the BIOS and there was a new time about one hour early(!). The boot phase then reset the time again, this time several hours forward (usually two to six hours). This is an iterating process, with a net gain of several hours per boot. It is not always whole hours -- like in a time zone error but it involves also minutes. System is set to UTC as affirmed by the "date" command. What could be the cause of this behaviour of the clock / timer?

View 14 Replies View Related

Fedora Hardware :: BIOS Broken Message When System Starts / Restarts

Jul 1, 2010

Since I have installed fedora 13 in my system (HP pavilion 1506tx) I rtsam getting this error every time my system starts/ restarts. I don't know how to correct this error. Here is the message displayed in Automatic Bug reporting tool

------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:647 check_zero_address+0x7d/0x191()
Hardware name: HP Pavilion dv4 Notebook PC
Your BIOS is broken; DMAR reported at address zero!
BIOS vendor: Hewlett-Packard; Ver: F.55; Product Version: 039B140000241210100020000
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.33.5-124.fc13.i686 #1
Call Trace:
[<c0436df5>] warn_slowpath_common+0x65/0x7c
[<c09d92a3>] ? check_zero_address+0x7d/0x191
[<c0436e40>] warn_slowpath_fmt+0x24/0x27
[<c09d92a3>] check_zero_address+0x7d/0x191
[<c05edc18>] ? acpi_get_table_with_size+0x53/0xa1
[<c09d93c8>] detect_intel_iommu+0x11/0x69
[<c09bd888>] pci_iommu_alloc+0x8/0xa
[<c09ca721>] mem_init+0xe/0x245
[<c09b776a>] start_kernel+0x1bf/0x34b
[<c09b73e7>] ? unknown_bootoption+0x0/0x18e
[<c09b7099>] i386_start_kernel+0x99/0xa0

View 5 Replies View Related

Ubuntu Installation :: 9.10 Server - Alert Message After Reboot

Jan 5, 2010

At first I tried the using the CDROM to install the server but around 8% through it could not talk to the CDROM anymore. I did attempt this a few times including re-seat the CDROM and it stopped at the same point every time. I then used the Mini install and that worked. However, after I rebooted I received the this error.

Gave up waiting for root Common problems:
Boot args (cat /proc/cmdline)
Check rootdelay
Check root

ALERT! /dev/disk/by-uuid/bfaafj88-83ce-4dd2-8c6f-26o9a869eaea does not exists Dropping into shell:
(initranfs)

I then reboot from this point by issuing the reboot command and can then go into the rescue login with networking. I did select reconfigure GRUB and rebooted but same error as above.

System is an old Dell Poweredge 1550
Ubuntu = 9.10 server

View 1 Replies View Related

Ubuntu :: Laptop High Heat And Constant Running?

May 2, 2010

Just put a fresh clean copy of Lucid on the laptop. I have noticed this for a while on the otherr versions and distros also, and finally started looking at. My laptop runs, contantly.The fan seems to be always running. I don't have more the a couple of applications at time, I don't use it for work, so nothing extensive. Web browsing, music, email, photos. End user stuff. So I added a heat application in the panel just to see what was happening. I can get the temp down to around 150F-ish if I am not even looking at the laptop. But, open anything and start workingand I am sitting arround 183F-185F. Is this normal? I am just getting toired of having such a hot laptop on my lap, I even have a pad under it so the air can circulate witht the fan, but, a constant running fan is what I have and the heat can be felt through the pad if I am sitting for a couple of hours.

View 9 Replies View Related

Ubuntu Installation :: Unknown Filesystem Grub Rescue Message On Reboot

Oct 25, 2010

I am fairly new to linux and my laptop froze so I rebooted it and now I have this error. I have tried to load the files needed using the prompt but nothing seems to work so here is my bootinfoscript thing. Any way for me to reinstall ubuntu over the sda5 partition but keep my files?

Code:
Boot Info Script 0.55 dated February 15th, 2010
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb .....

View 5 Replies View Related

Hardware :: SSD Drive Create Substantially Less Heat Than HDD?

Aug 21, 2010

I used to have heat problems in summer time (it's winter now) and regular breakdowns of hardware due to ambient temperature going well over 40C. I am tempted to replace 3 HDD in my PC with SSD drives and I wonder if the inside of my machine will be substantially cooler, or if the SSD tolerate heat better than the HDD.

View 3 Replies View Related

Ubuntu :: Heat Monitoring - Download To Monitor My Processor Temperature On The Desk Top?

Apr 8, 2010

Is there a program already in Ubuntu or that i can download to monitor my processor temperature on the desk top?

View 2 Replies View Related

OpenSUSE Network :: After Reboot An Error Message Occured, Saying That The KNetworkmanager Is Not Working?

Jun 19, 2010

I updated my NetworkManager from version 0.9svn1128615-2.2 /opensuse/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/i586/) to the newest version 0.9svn1128615-138.2.The result was, the after reboot an error message occured, saying that the KNetworkmanager is not working and it would be not able to start the program !Did anybody else have the problem with this newest version?

View 2 Replies View Related

General :: Installation Failure Fedora 12 - Message Safe Reboot Needed Received Signal 3

Jul 15, 2011

i have a dell inspiron laptop lap top with windows7 os.my hardisk is 320gb capacity.now i want to install fedora as my secondary os. I tried fedora12 but instaltion terminated abnormally with the message safe reboot needed recievied signal 3. i have 20 gb unallocated space in my disk.

View 5 Replies View Related

Ubuntu Installation :: Installation Fails Every Time - Message To Reboot My Computer Appeared At The End

Jan 9, 2011

I recently decided to install ubuntu netbook remix 10.10 to my Toshiba NB200. I was using windows and I wanted to completely erase them. I burned the USB, I followed every single instruction the site had, and even though the installation seemed to work, and a message to reboot my computer appeared at the end, the installation finally fails. When I reboot, the only thing I get is a black screen with an underscore at the top left corner. I tried the installation four to six times and even tried older versions as well but all I get is the black screen.

View 9 Replies View Related

OpenSUSE :: After Reboot Suse10.2 Got A Error Message "Could Not Start The X Server"

Jul 12, 2010

I used init 0 to make server shutdown,and replaced the power cord when I boot the server,it can't enter the GUI then I used init 5 and get the following message

Could not start the X server (your graphical environment)due to some internal error. contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart GDM when the problem is corrected.

View 7 Replies View Related

Hardware :: Pc Generate Less Heat Running Than It Would If It Were Running XP?

Dec 15, 2010

My wife's portable's fan is not working well and the manufacturer (LG, or more aptly, LNSG - Life's not so good!) will not or cannot supply a replacement. So, I was wondering if linux is cooler than XP.

View 2 Replies View Related

Ubuntu :: Error Message: Unable To Retrieve Message

Dec 31, 2010

Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message

Running the following;

evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic

View 4 Replies View Related

General :: Embedded Reboot Crash - Error Executing The Reboot Command

May 4, 2011

I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.

View 2 Replies View Related

General :: Will Not Reboot After Install (Arch) - -bash: /sbin/reboot: Input/output Error

Oct 7, 2010

I am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.

View 6 Replies View Related

Fedora Security :: Send An Email Using Evolution The Message Was Not Sent But Returns A Error Message?

Apr 30, 2009

Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.

View 1 Replies View Related

OpenSUSE :: Click On Install Get The Following Error>>Message Did Not Receive A Reply (timeout By Message Bus)?

Nov 10, 2010

Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)

View 5 Replies View Related

Red Hat / Fedora :: Identify Reboot Source Or Cause Of Reboot?

Feb 16, 2011

last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen

View 2 Replies View Related

Kernel :: Use Message Queues For Sending Message?

Apr 16, 2010

I was trying to use Message Queues for sending message from aninserted kernel module to user space. The function sys_msgsnd failedgiving the obvious error -EFAULT.However, I was able to send the message from kernel to user space when I had made the same driver part of kernel (and not inserting it).How is that possible?I am using linux.2.6.19.x (arch=ppc)I now use Netlink socket to communicate from kernel to user, but the aboveproblem seemed strange to me.

View 2 Replies View Related

Programming :: Create A Message Forwarder Program That Receive A Message On Port A And Pass It On T Port B?

Sep 6, 2010

We are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.

[Code]...

View 4 Replies View Related

General :: KMail's Message List - Change Message List Display?

Jul 20, 2009

KMail 1.11.4, KDE 4.2.4: I'm migrating from WinXP to Mandriva, and installed KMail at the weekend. Works fine, but I have a niggle - the message list displays headers grouped by month order. I'd like the option of having a simple list (no groups), and suspect that it could be done - but I haven't been able to find out how. I've checked in the Handbook without success, and a search in LQ hasn't turned up anything yet.Any suggestions gratefully received. If this isn't the right place for a KMail query,

View 1 Replies View Related

Ubuntu :: Can't Get To BIOS

Jun 13, 2010

I'm trying to do a test run of 10.04 LTS with a cd but the machine isn't booting from the cd ( or two other subsequent cds that I know work). I thought I remembered not having to do anything to make this boot from a cd, so either something has changed or I've flipped out. Once it boots 9.04 from the hard drive it recognizes that there is a program cd in there though. I've tried F8, F10, F12 and ESC - ESC nets me a list of drives to start from Ubuntu 9.04 and several versions of recovery mode also a command line. I'm baffled - this is probably something simple but its beyond me at this point.

View 6 Replies View Related

Ubuntu :: How To Install 10.04 On BIOS Alone

Sep 29, 2010

I have a Dell XPS 600, and absolutely no working OS is installed on the machine. By that, I mean I have WinXP, but there's some error and when I run a normal boot it loads Windows Setup, but it "encounters" an error. Not that I care, I just want Ubuntu. So basically, I need to setup Ubuntu without first running an operating system. But my BIOS won't load it- I press F12 at startup and select "boot from onboard CD drive" but then it tells me that there's nothing to startup from, and I get stuck pressing F2 to retry. Btw, I used the regular 10.04 disk download, not the live CD.

View 9 Replies View Related

Ubuntu :: Cannot Seem To Figure Out How To Get Into The Bios

Jan 7, 2011

I made a bootable usb drive that I would like to test on my sony viao laptop. I cannot seem to figure out how to get into the bios so I could set it to boot from the usb. I tried pressing F10 and F12 while booting but these were all guesses as I do not know which key combination is used to go to bios on this machine.

View 9 Replies View Related

Ubuntu :: Boot From A USB Without Having To Go Into BIOS?

Jan 26, 2011

I have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after adding a few applications. But this USB will be used only on machines other than my own - likely with Windows as the only OS. And it is not comfortable for me to go into the BIOS of a strange machine to change the order of booting and afterwards go back to reset the order , especially with the owner looking on, obviously worried, and wandering whether his machine will still be working!

So my question: Is there any way to boot from a USB without having to go into the BIOS? code...

View 1 Replies View Related

Ubuntu :: Mount A Dvd When The BIOS Does Even Have A Setting For DVD's?

Mar 3, 2010

do you mount a dvd when the BIOS does even have a setting for DVD's?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved