I have noticed that my music, which is all in .ogg format, is skipping every once in a while in Ubuntu, but not in Windows (I use Banshee in Ubuntu; Winamp for when I use Windows). My whole music collection isn't skipping entirely--that is, not every music file has this problem. However, the ones that do, the music file skips like a scratched CD for 1-2 seconds. The same music file doesn't do this at all when played with Winamp in Windows. Are my music files corrupted? What is going on? None of the music files were like this before (with the skipping), but for some reason, the skipping occurs only in Ubuntu, not Windows/Winamp. Not every music file has this happening, but some of them do.
I have been thinking about converting all my music files to .mp3, or re-converting the files as .ogg as another copy,
I'm trying to copy some files via terminal because i had some issues with nautilus crashing in the middle of the operation. So how can i copy files recursively while skipping existing ones?
I just tried to install kubuntu 6 times on my laptop. I have downloaded the file from a different mirror each time and burned the image via brasero. This used to work for me... Kubuntu will not install. Keeps saying its skipping missing files or something. Anyone else getting this? I eventually gave up on 9.10 and am now trying alpha 1...
I can play WMAs with MPlayer but when I try to skip forward a few minutes it plays for a split second, and then plays at another random part of the video making it impossible to play a WMA from anywhere but the beginning.
Code: mplayer -demuxer lavf ccent01.wmv.The above command opens the video but there is no menubar, scroll bar, or any reaction to right click although strangely scrolling my mouse wheel seems to randomly skip through the video. In VLC when trying to play the same file I get the error:
Code: No suitable decoder module: VLC does not support the audio or video format "wmas". Unfortunately there is no way for you to fix this. No suitable decoder module: VLC does not support the audio or video format "MSS2". Unfortunately there is no way for you to fix this.After converting the .wma file to .mpg, and also .avi using a command similar to:
Code: mencoder ccent01.wmv -ofps 23.976 -ovc lavc -oac copy -o ccent01.mpg. There is no change playing the file with mplayer and in VLC it now only gives one error: Code: No suitable decoder module: VLC does not support the audio or video format "wmas". Unfortunately there is no way for you to fix this. I'm preparing for a Cisco exam later in the week and would like to spend tomorrow watching hours of computer based training videos but would rather not have to do it in Windows. Already tried using Media Player Classic in WINE but it crashed. Is there a workaround? Oh and I already have ubuntu-restricted-extras installed.
For backup purposes, I have been trying to find out a solution for Rsync -avr sourcefolder targetfolder with Skipping 0 bytes files option.
However it seems that they are no solutions. Would someone have an idea, to skip to source files into the sourcefolder that have no content, ie. 0 bytes?
I have a fresh install of Karmic and get the occasional skipping when I play files through amarok.If a play a CD through Rythmbox the sound is ok, so I don't think its got anything to do with pulseaudio. Could it be the xine backend?
I've multiple jpegs uploaded form IP cam via FTP, I use mencoder to periodically pack them into single avi file, problem is that sometimes one or two jpegs submitted by cam are broken, and this make mencoder exit, without producing movie
According to the man page, rsync should copy "special" and "device" files if the corresponding options are set. Also the man page says that the -a option (--archive) includes the -D option, which is "same as --devices and --specials". BUT We use the -a option, and still get the following in our report:
On a laptop I have Windows 7 installed, and ubuntu 11.04. Now. A while ago the HDD died and I replaced it. with some data loss but nothing much to worry. Now I thought that it would be useful if I somehow could manage to direct the Documents, Music etc. etc. folders located /home/[user] to somewhere on a different partition HDD. I managed to make new folders on the partition and link them with the documents and music folders etc.. the problem now is is that you have to unlock it every time by either opening the partition and insert your password. I know that the password problem can be evaded by simply changing some settings, but. I want to evade the whole process of clicking on the partition. It is for security reasons that that have to sort of activate the partition, but I find it becoming a bit annoying.
So, has anyone a clue of how to activate the driver right at the start? something automatic stuff. Or does someone know how to disable this ?
So I did a short 30 second video of Recordmydesktop in ogv, and was wanting to convert it to mkv. So when I did the video was awesome but the sound kept skipping. Here is the conversion command i did
Code: ffmpeg -i test.ogv -vcodec libx264 -vpre medium -crf 24 -threads 0 -acodec copy test.mkv video was great, audio not.
I just installed Ubuntu 10.10 last evening and all has been going well. Lucid didn't work out for me, so I used other distros. 10.10 fixed all issues except one thing. This is a need for me; e-courses I take require that I use Elluminate Live, a Java-based conference software. It runs flawlessly on every distro except Ubuntu. I had to use another PC running a different distro in order to get to a class. I really don't want to do that all the time. I thought it may be OpenJDK, but I found that Sun Java was installed and in use (I installed the extras while installing). I tried OpenJDK (worth a shot eh?) and the exact issue persists. All other programs have perfect audio.
Banshee only recently started doing this: When I play an song it works fine but if I click on skip it plays the next song for about 1-2 seconds then Banshee just closes. Also if I just let the song play (or skip to the end of the song) it also closes within 1-2 seconds of playing the next song. If I'm half way through a song I can click on another song to play it and it works fine through.I've tried disabling all my extensions but that didn't make any difference.
If I launch Banshee by typing 'banshee' into Terminal (and then play a song and press the skip button) this is what the Terminal says:
I installed latests version Suse 64bit, and I have problems with Internet radio streams. Streams are skipping for 2-3 seconds every 10-20 seconds, or sometimes as long as 1-2 minutes. I tried GStremer and Xine engines, tried Amarok, Banshee.... always the same - radio streams skipping. I never found a way to increase buffer for Internet streams. Updated to last versions , still the same.
I would like to know if what this log error mean and how i can resolve this matter. I would like to verify if this is a misconfiguration or a bug on my settings
the log error is:
snmpd:error parsing ', skipping
the RHEL version used was 4 update 4 64 bit
the snmp packages installed were:
net-snmp-5.2.1-0.2 net snmp-lib - 5.1.2-11 net-snmp-lib - 5.2.1-0.2
I recently upgraded my machine to a AMD Athlon 64 X2 3800+ in the hopes of being able to stream HD movies to my ps3 and tv. I currently dont have my ps3 hooked up. But yesterday I wanted to watch HD movies from my server (samba share) from my laptop hooked up to the tv via CAT5. The issue is that when I started the movie, playback back was skipping. When I watch the movie on the Ubuntu server no skipping. I am wondering if this has to do with my switch being 10/100 and not GB? Im not trying to watch them over wifi as that would be impossible. The connection is CAT5 cabling. Should I try a GB switch instead?
I have a usb-hdd at one location that I use for backup purposes.It is listed (by its specific label, not uuid because I don't want to go through the hassle of changing this when changing backup drives or adding one at a different location.Now, since upgrading from 9.10 to 10.04, I get the following message during boot when the usb-hdd is not present and thus not attached:The disk drive for "/media/backup" is not ready yet or not presentI need to press S to skip mounting manually, whereas 9.10 just ignored that fstab entry and continued booting. How can I get the old behavior back? Is there an option I can give in fstab that mounts the drive at bootup when present and ignores it when not?
Perhaps an even better solution would be to let the drive be mounted according to the fstab entry whenever it is attached (be it at bootup or at any other moment): is this possible?elated to that: are drives unmounted/mounted in a suspend/resume cycle?
I've installed Debian Jessie recently. I've also installed LXDM from the testing repos.Then I created a password-less user account with 'guest' as its username by this method:
Now even if I set "skip_password=1" in /etc/lxdm/lxdm.conf the login screen still asks for the password. If I enter nothing there, it won't let me login.
I'm trying to backup a drive with an LVM2 partition. 8 of the 10 partitions in the LVM restore fine, two do not. SDA1 is the boot partition, SDA2 is an LVM2 partition with 10 partitions inside of it. When I restore the image created by Clonezilla the partition names are there but two of the partitions are unreadable and unmountable. I'm certain Clonezilla is skipping these two partitions because its entire image is around 40G and when I TGZ these two partitions I get an 80GB file. Clonezilla doesn't appear to give any errors and as it "winds up" it shows that it's unmounting the LVM partitions and I see my missing two in its list but when Clonezilla makes the image it never mentions the two I (really) want. I'm trying Clonezilla's DD method right now but it appears to be DDing each partition (going through the LVMs right now).
I'm working on a ~1 TB disk that was loaded with all kinds of images and documents that lost it's HFS+ partition table. The person for which I'm doing the favor of running scalpel says it's likely there's 90GB of stuff. Somehow, the disk got relabeled/MBR changed to some FAT variant that works on the whole Terrabyte.
Attempts to recover the partition info failed.My first try with scalpel finds more than 90GB of image file headers alone and that blows through all of my storage. Of the headers found and recovered as images, a simple test shows most of the image files are broken. The cluster size option does not work if I use it by itself. It errors out before it gets going.I want to speed things up and skip the countless broken image files.
I currently dual boot windows XP Pro with Ubuntu 9.10. I made a mistake last night playing with gparted and lost my E drive, which had all of my music, games and movies plus is where my Ubuntu install was. I then ended up reformatting the drive with windows and reinstalling Ubuntu 9.10.My question is how can I put my windows files on my E drive without going through the hassle of reinstalling windows.
I have a 20g IDE drive where my windows install is, windows and Ubuntu both tell me this drive is failing, (I have used it for booting since 2002, so I am not that concerned with it), another 40g IDE drive for more storage and a 160g SATA drive where Ubuntu is again installed. I want the SATA drive to be my main boot drive now, so how can I clone my windows boot to the other drive. I tried gparted but could not figure it out. I have gparted burnt to cd, booted with it and just don't understand how to use it.Also, if I clone this boot drive to the SATA drive, do I need to change jumper settings on my 40g to master when I take out the 20g drive.20g master and 40g slave on first IDE channel and 2 CD devices on second IDE channel and SATA drive on first SATA connection. I read somewhere that it is better to keep the cd devices on another channel than the disk drives.
I've just made the move to openSUSE* and after the installer seemed to bork my xorg.conf because of my Wacom tablet things have been going quite smoothly. My only problem at the moment is that MP3 playback through Exaile, Banshee or Totem stutters and pauses several times per track or more. The only commonality I can see is GStreamer, but nothing is giving me errors to the console.
* I ditched Fedora to get better Monodevelop support after using Redhat 7.3 and 9 followed by FC 3 and 6 then Fedora 7, 8, 9 and 10. The Ubuntu forums seemed to keep giving me occasional answers to questions, but the Suse build service gave me the RPMs, when the requirements matched.
ld: skipping incompatible /usr/lib64/libc.so when searching for -lc ld: skipping incompatible /usr/lib64/libc.a when searching for -lc ld: cannot find -lc
They have pictures and documents everywhere so I figured I would just backup their entire HDD onto my external one and let them go in and transfer them back off. I keep proper backups so this isn't how I normally do things. I have done similar things in the past with dieing HDD's and Knoppix but I have never had this issue. I burned a CD using the latest ISO and Ubuntu seen both the main HDD and my external. I just copied all the contents of the main HDD over to the external. All went well and I could browse and view all the files from the external HDD after the transfer using the live CD. Unfortunately I am having an issue seeing the external HDD in Windows. As soon as I hook the drive up - windows says I need to Format it(Which I won't do obviously). But if I boot the live CD I can still see and use the files. How do can I get windows to see the drive and files without destroying data?
I recently built my first computer which has Debian Jessie running on it.
Everything was running great until I updated the computer a few days ago. After doing that and turning it on a few hours later, the keyboard started missing letters (as in it wouldn't register every key click) and was also typing some letters over and over again. It seems that it doesn't matter what key I press, the same problem occurs.
I tried using the keyboard on my laptop; it worked perfectly. I also tried connecting up another keyboard I had laying around and that seemed to have the same issue. Both keyboards are mechanical.
