Server :: Rsync "skipping Non-regular Files" With Archive Option?
Apr 29, 2010
According to the man page, rsync should copy "special" and "device" files if the corresponding options are set. Also the man page says that the -a option (--archive) includes the -D option, which is "same as --devices and --specials". BUT We use the -a option, and still get the following in our report:
skipping non-regular file "pristine/dev/full"
skipping non-regular file "pristine/dev/null"
skipping non-regular file "pristine/dev/ptmx"
[code]....
Is this the expected behavior? (BTW this is copying a non-running linux-vserver called 'pristine')
View 2 Replies
ADVERTISEMENT
Jun 10, 2011
For backup purposes, I have been trying to find out a solution for Rsync -avr sourcefolder targetfolder with Skipping 0 bytes files option.
However it seems that they are no solutions. Would someone have an idea, to skip to source files into the sourcefolder that have no content, ie. 0 bytes?
View 2 Replies
View Related
May 11, 2011
Using rsync, which switch will allow rsync to suppress the "skipping non-regular file" messages in the output while still being reasonably verbose for everything else?
View 1 Replies
View Related
Mar 1, 2010
I am running this command,
Code:
rsync -vrl --progress --stats --perms --delete --exclude '*~' --exclude 'Music' --exclude 'server' --exclude 'Downloads' --exclude 'Ubuntu One' --exclude 'Videos' /home/dave/ /media/server/backup/desktop/dave
It transfers files that remain unchanged. The one that I notice every time is
Code:
.VirtualBox/HardDisks/anOS.vdi
I have several OSes installed in VirtualBox, so this takes a very long time.
View 1 Replies
View Related
Sep 18, 2009
I just tried to sync files from one server to another. After the sync process, I found the files are bigger than original ones.
I looked up the web and found someone mentions the rsync daemon. So I have to run the daemon on one server before I run the rsync?
The command I used is rsync --partial --progress -r source destination
View 1 Replies
View Related
Jul 21, 2010
use rsync to cp such files and dirs under /var/www/html/mydir directory but these two files(/dir4/1.html /dir4/2.html) cant rsync to dest mechine.
rsync configure file,below...
View 2 Replies
View Related
Apr 1, 2010
I'm running rsync and outputting the log to a file using --log-file option. I am also using the --link-dest option, which in turn is adding the hard link creation output for EVERY file in the log file. I want to ONLY show the actual file transfer (if any) that take place.
In the 'log format' section of rsyncd man page here I assume you can do this, I just can't make sence about the code. If someone has better experience with reading it, can you please assist ?
View 2 Replies
View Related
Feb 2, 2011
I try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies
View Related
Feb 23, 2011
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies
View Related
Sep 15, 2010
I have a Linux host acting as an ISCSI server for a Windows box. I want to keep an off site backup, so I figure rsync will keep the ISCSI server synced with an offsite Linux host. I understand that Rsync does block level incremental transfer to conserve bandwidth ok, awesome.The trick is, that I also want an archival copy kept. Say I want to go back to a revision of a file from 10 days ago, I need to be able to do that.
I was planning on using Backup Exec, since we currently have a licensed copy. Throw the archives from Backup Exec onto the ISCSI server as well, and have it keep a rotating 30 day backup, or something like that. The issue I see here is that this will be creating a deleting files as it does its daily backup rotation. I'm guessing RSYNC will see these as new files, and likely retransmit everything on a daily basis. The question then becomes, is this assumption correct, or will it still know to do a block level incremental transfer even when file names and such are changing?
View 5 Replies
View Related
May 11, 2011
Right now I use "rsync -a" to sync my zimbra directory with another directory as a backup. I'd like to archive that backup (zip....rar....etc etc) in such a way that it preserves the same information as rsync -a would (symlinks, permissions.... Etc etc). Does anyone know of such an archive method? My goal is to have it so that if I uncompress the file, the result should match exactly what my zimbra was at the time of backup.
View 6 Replies
View Related
Aug 21, 2009
I am trying to use rsync to keep 2 machines in sync. I get the following error sometimes. If I rerun the rsync it usually works.
IO error encountered - skipping file deletion
View 1 Replies
View Related
Jun 9, 2011
I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
View 3 Replies
View Related
Jun 14, 2011
I want to run rsync on server A to copy all files from Server B when they are newer than 7 days.(find . -mtime -7) I don't want to delete the files on Server B.
View 2 Replies
View Related
May 20, 2010
I've 15 web servers (in private network) running RHEL, Apache. Needs to sync web files between them. each server is accessible to each other via public key (with passphares).
1) Main server is web1 (where dev upload files initially). So I can make all other servers accessible by web1 without password/passphares and run rsync periodically to update files between them. But security is an issue here as all servers will become easily accessible.
2) Run rsync daemon in all other servers (except web1) on designated port and run rsync command from web1 to sync files. This will do the work but running daemon in all servers might increase overhead and making sure that daemon is running all the time etc. are my concern for this implementation.
View 8 Replies
View Related
Jan 18, 2011
I have noticed that my music, which is all in .ogg format, is skipping every once in a while in Ubuntu, but not in Windows (I use Banshee in Ubuntu; Winamp for when I use Windows). My whole music collection isn't skipping entirely--that is, not every music file has this problem. However, the ones that do, the music file skips like a scratched CD for 1-2 seconds. The same music file doesn't do this at all when played with Winamp in Windows. Are my music files corrupted? What is going on? None of the music files were like this before (with the skipping), but for some reason, the skipping occurs only in Ubuntu, not Windows/Winamp. Not every music file has this happening, but some of them do.
I have been thinking about converting all my music files to .mp3, or re-converting the files as .ogg as another copy,
View 9 Replies
View Related
Jul 21, 2010
Got it on a CD and was using it as "Try Ubuntu" instead of installing it for good (I still wanted to see if there were memory issues or HDD issues with my desktop, before I installed it for good).Anyway, I would shut down the pc after about 2 or 3 days and redo the CD install (try ubuntu option) again and add all the plugins etc.Kids used this for playing some games on friv or nickjr.The real issue - of late, when I try to start the PC and boot from the CD, I am getting a LOGIN screen instead of the regular option to install from CD or Try the Ubuntu.
View 9 Replies
View Related
Apr 12, 2011
I have a tiny shell script to rsync files between two servers and remove the source files.
This script works fine, when it has been initiated manually or even when the rsync command is executed on the command line.
But the same script doesn't work, when I try to automate it through crontab.
I am using 'abc' user to execute this rsync, instead of root, as root login to servers are restricted in all of our servers, by us.
As I mentioned earlier, manual execution works like charm!
When this rsync.sh is initiated through crontab, it runs the first command(chown abc.abc ...) perfectly without any issues. But the second line is not at all executed, and there is no log entry i can find at /mnt/xyz/folder/rsync.log.
View 6 Replies
View Related
Oct 7, 2010
I'm trying to copy some files via terminal because i had some issues with nautilus crashing in the middle of the operation. So how can i copy files recursively while skipping existing ones?
View 7 Replies
View Related
Jan 9, 2010
I just tried to install kubuntu 6 times on my laptop. I have downloaded the file from a different mirror each time and burned the image via brasero. This used to work for me... Kubuntu will not install. Keeps saying its skipping missing files or something. Anyone else getting this? I eventually gave up on 9.10 and am now trying alpha 1...
View 7 Replies
View Related
Nov 23, 2010
I can play WMAs with MPlayer but when I try to skip forward a few minutes it plays for a split second, and then plays at another random part of the video making it impossible to play a WMA from anywhere but the beginning.
Code:
mplayer -demuxer lavf ccent01.wmv.The above command opens the video but there is no menubar, scroll bar, or any reaction to right click although strangely scrolling my mouse wheel seems to randomly skip through the video. In VLC when trying to play the same file I get the error:
Code:
No suitable decoder module: VLC does not support the audio or video format "wmas". Unfortunately there is no way for you to fix this. No suitable decoder module: VLC does not support the audio or video format "MSS2". Unfortunately there is no way for you to fix this.After converting the .wma file to .mpg, and also .avi using a command similar to:
Code: mencoder ccent01.wmv -ofps 23.976 -ovc lavc -oac copy -o ccent01.mpg. There is no change playing the file with mplayer and in VLC it now only gives one error: Code: No suitable decoder module: VLC does not support the audio or video format "wmas". Unfortunately there is no way for you to fix this. I'm preparing for a Cisco exam later in the week and would like to spend tomorrow watching hours of computer based training videos but would rather not have to do it in Windows. Already tried using Media Player Classic in WINE but it crashed. Is there a workaround? Oh and I already have ubuntu-restricted-extras installed.
View 6 Replies
View Related
Jul 18, 2010
wrote a script to sync my netbook music with my server music and everything was fine.but if for some reason lets say i run it accidently and i'm not connected to my network, i just wiped my netbook music .here's what i got so far:
Code:
Sudo mkdir /media/ServerMusic/
mount -t cifs -o user=Justin,password=****** //192.168.1.108/Public-3/Music/ /media/ServerMusic/[code]....
i need to have the --delete option in rsync (say i sync it and realize i hate some music, when i delete it from the server i don't want it still on the netbook.i want an if statement in here somehow, but i'm not sure how to do it.something like, the first command in the script should be a ping test, if ping doesn't work end the script, if ping does work continue or if the server music gets mounted to the created directory continue, if the mount failed, or even in the mounted folder is empty stop the script
what can i do here to ensure i can keep the --delete and not have to worry about losing my music if the mount fails?
View 9 Replies
View Related
Jul 1, 2010
I'm trying to set up rsync to only copy new songs from my computer to another. I'm using the "--ignore-existing" argument, but it appears to copy all files anyway. The client (source) is Windows 7 64-bit running DeltaCopy Client and the server (destination) is Synology DS410 (running rsyncd).
Here is the syntax:
View 2 Replies
View Related
Jan 16, 2011
I've multiple jpegs uploaded form IP cam via FTP, I use mencoder to periodically pack them into single avi file, problem is that sometimes one or two jpegs submitted by cam are broken, and this make mencoder exit, without producing movie
View 1 Replies
View Related
Jul 20, 2010
i am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?
View 3 Replies
View Related
Dec 8, 2010
I'm using Ubuntu 10.04 LTS server and Postgresql 8.4. I have a .sh script that is run by cron every other hour. That works fine. The .sh script includes an rsync command that copies a postgresql dump .tar file to a remote archive location via ssh. That fails when run by cron; I think because it is (quietly) asking for the remote user's password (and not getting it). I set up the public/private ssh key arrangement. The script succeeds when run manually as the same user that the cron job uses, and does not ask for the password. I am able to ssh to the remote server from the source server (using the same username) and not get the password prompt (both directions), so why doesn't rsync work? I even put a .pgpass file in the root of that user's directory with that user's password, and the user/password are identical on both servers.
I think the problem is rsync is not able to use the ssh key correctly. I tried adding this to my script but it didn't help.
Code:
Here is the rsync command embedding in the .sh script.
Code:
Here is the cron entry:
Code:
View 6 Replies
View Related
Feb 8, 2010
I have a fresh install of Karmic and get the occasional skipping when I play files through amarok.If a play a CD through Rythmbox the sound is ok, so I don't think its got anything to do with pulseaudio. Could it be the xine backend?
View 1 Replies
View Related
Oct 5, 2010
I know I can do find . -type f, but that includes binary file and I couldn't find a way to exclude them with find
View 4 Replies
View Related
May 12, 2009
I am trying to install OTRS 2.3.4 on an Centos release 5.3 (Final) with Kernel 2.6.18-92.el5xen on an x86_64 with an yum -y update after setup
the problem is when I try to install the perl:GD GD::Text GD::Graph GD::Graph::lines GD::Text::Align
on installing the GD I receive:
Code:
/usr/bin/ld: skipping incompatible /usr/lib/libXpm.so when searching for -lXpm
/usr/bin/ld: cannot find -lXpm
collect2: ld returned 1 exit status
make: *** [blib/arch/auto/GD/GD.so] Error 1
LDS/GD-2.41.tar.gz
code....
View 4 Replies
View Related
Jan 31, 2011
[url] I really love that conky config. But I can't figure out how to set up the files instead the archive.
View 1 Replies
View Related
