I'm struggling around with my SLI config under lucid. I tried to configure it with "nvidia-xconfig --sli=sfr" and other modes. The result is, that I restart my X server and get nothing. No video on my monitor.
[Code]...
I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
This is my first post and I am relatively new to Ubuntu, please be gentle
I am running Ubuntu 10.04.
Hardware is as follows:
D945GCLF2
2GB Ram 667Mhz
120GB WD Drive
External USB DVD-Rom
I can install and run the OS perfectly with this setup. Once I add an Nvidia 8400GS Video Card via PCI, the system will no longer boot into the OS. I also get errors when trying to boot into the Live CD as well. I will copy the error message details over at a future date because currently this is my only working system. They did have something to do with low level memory corruption or some such with a warning about potential BIOS corruption. Once the 8400GS is removed, the system will boot normally if a bit slower than normal (on first boot after removal).
I have no idea what to do to get Twinview to work. I had found a bit of code to paste into the xorg.conf file but after I pasted it in and restarted my computer, but it wouldn't boot up. Whenever I open up the "Monitors" dialog under System>Preferences, it doesn't even see that the second monitor is there! It doesn't matter if I go to the default tool or if I go to nVidia's tool. On the nVidia tool, under X "Server Display Configuration", there is a button "Configure...", when I press it, it asks "How should this display be configured?". The options "Twinview" and "Disabled" are both unselectable and the only one that I can select is "Separate X Screen". It's almost like my computer doesn't know that I have a second monitor plug.
I am running Ubuntu 10.04.
My xorg.conf:
Code:
Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
Option "NvAGP" "1"
[Code]....
I just did what i did below reinstalled them and seems to be working again. I installed the drivers then updated my ubuntu install (fresh install) which i read in another thread that if something updates the kernel or whatever it seems to below out your nvidia install on 10.04 and 10.10 i think if i remember right.
Ok so i haven't been using ubuntu in a very long time. Seen 10.04 lts came out and decided to wander back (xp is just getting to old and seems to be getting more and more sluggish everytime i upgrade to newer and newer hardware lol think no one is really supporting it anymore or barely and i'm to dam cheap to buy 7 lol)
anyway so i downloaded the newest geforce drivers from nvidia.
I followed instructions i had seen on here can't find the thread now.
anyway I shut down nouveau or whatever its called.
Then i did a alt+ctrl+F1
cd Desktop
tried using sudo service gdm stop but it don't work so i did sudo /etc/init.d/gdm stop that worked but recommends the way that won't work above lol least for me.
Then i had the nvidia driver on my desktop so i did sudo sh N (then tab) enter. it started the driver up said it could not install the application or something i forget eh i'll find out but asked if i would like to continue. I said yes and installed the driver everything seems somewhat ok after that then i restart my machine and bam says i'm in low graphics mode now, and my x-server for nvidia don't have any options in it at all to modify anything....
I'm using NVIDIA-Linux-x86-260.19.21.run Nvidia driver i have should i try the older one? if i can find it 250 something i think it was?
Just curious if there is another method i can try to get a driver in. I don't like using old drivers i tend to like the hot new stuff either beta or latest solid release.
I just upgraded to 10.10 from 10.04. I used to have a manual install of the nvidia drivers configured (by downloading binary from Nvidia website) but right before I upgraded I used nvidia-uninstall to remove it. Upon rebooting into 10.10 I went to Additional drivers and activated nvidia-current. After I rebooted I still had no driver, so I looked in the Additional Drivers pane again. It says Nvidia-current is activated but not currently in use. Then I went to a terminal and typed:
sudo nvidia-xconfig. Thinking it would reconfigure X to work with my 460, however it instead said: command not found What's going on here?
When I type in -> mplayer -fs -zoom -quiet -vo xvmc -vc ffmpeg12mc ~/Downloads/ST-TGN-G* I get:bt_audio_service_open: connect() failed: Connection refused (111)bt_audio_service_open: connect() failed: Connection refused (111)above mesage repeated 10 more timesMPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Teammplayercould not connect to socketmplayer: No such file or directoryFailed to open LIRC supportYou will not be able to use your remote control
Pretty self explanatory, I can't get the NVidia driver to work with my laptop's 310M. And yes I have tried both steps in .64&postcount=9, but to no avail. The two error messges I'm seeing are "(EE) No devices detected." and "Fatal server error: no screens found".
View 3 Replies View RelatedI have upgraded to ubuntu 11.04... but after that i m not able to view full graphics of ubuntu.. desktop seems very dull. whenever i try to open my nvidia x server setting from system-> administration it says " You not appear to be using Nvidia X drivers".. Unity is also not working.. using ubuntu old theme,,
View 9 Replies View RelatedAfter upgrading (from 10.10), i get a line command prompting for login. I cannot get past this line/prompt. How do I bypass this prompt? So that I can access a prior version, if possible.
View 5 Replies View RelatedI'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I have Ubuntu 10.04LTS installed and want to get TV-OUT working so I can watch movies and stream media from the internet to my TV. The hardware I have installed is:
Nvidia GeForce2 mx400
TV is an old analogue CRT one
I know its an old graphics card and TV but the whole computer is put together from spares I have knocking around. So I have Ubuntu installed and the Nvidia proprietary drivers installed, version 96. Through the nvidia-settings application I have managed to get a picture in colour onto my TV screen, but the problem is there is about a 2 inch black boarder around the screen and also like a grey shadow over the entire screen. So I tried the NVTV application, the same thing happened again with the black boarders around the screen but the grey shadow over the entire screen had gone, so the black boarders are actually black and the colours show up properly.
So is there a way to get rid of the black boarders and grey shadow (if it decides to show up again), I am a total newb to Ubuntu but loving it so far and this is the only problem I am stump on so far. This is my X Config FIle I have with all the settings I have to get to the above point:
[Code]....
I just reformatted like 5times+ trying to fix this issue, happens with Lucid Alpha 2 & Karmic install. Once I install the driver my mouse stops working and same with my keyboard. As in the mouse laser just turns off and all lights on keyboard too, just kills them off.
View 5 Replies View RelatedI'm doing an install for a friend, the machine is a Gateway with AMD Turion64. The install required the 64 bit version of Lucid 10.04 RC. When I try to install the NVIDIA hardware driver, upon reboot, it flickers, fails, and tells me to use low-setting graphics mode.
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2)
I have tried all 3 options in the Hardware Drivers menu with no success.
My problem started with the following post.[URL]I ended up tracing the issue back to openGL that disappeared during an update and the nvidia driver had broken. The only remaining issue is that the 3D acceleration on the NVIDIA (GeForce 8600 GT) card will not activateURL]hich I have done many times now. I am now on the nvidia-173 driver as that one seems to be working the best. Even the nvidia-settings is having trouble and crashes when I try to look at the OPENGL/GLX information.I have found many instances of jockey showing that the driver is "active but not in use" which is what I am seeing. The problem is that the 3D acceleration is not working and the issue seems to be the driver.
View 6 Replies View RelatedI activated my graphics card on Linux Mint which is Nvidia GEFORCE GT 130M. Now when I boot up, after bios the loading screen looks like in the picture (sorry its crappy quality). When it gets to the login screen and afterwards it is just blank, but i can tell its running underneath because i can shut down by doing ctrl alt backspace and then tab and enter. I tried entering recovery mode but it was the same. Atm im using a live cd.
View 2 Replies View Relatedim trying to get my xbmc box running on an asus ion mobo. in gnome i set all audio output to the hdmi driver but im not getting any sound on the tv. Im a newbie by the way so it's problably some silly thing.. but i've included a link to my alsa information and pulseaudio settings in case it's a big thing.URL...
View 4 Replies View RelatedI recently downloaded and installed Ubuntu 10.10. I thought it was awesome...still do. OK, the problem is i was prompted to install some proprietary drivers and so i did but thats when the problems started. After reboot i couldn't get the GUI or gdm (not sure what to refer it to) to work. It goes directly to a terminal screen every time so i actually reinstalled Ubuntu and tried installing the drivers all different ways but no luck. i also can get into recovery mode and do low graphics. the driver version im trying to get working is nvidia 260.19.12. my graphics card is a geforce 7 series cant remember the number i have a 32bit processor.
View 9 Replies View RelatedI upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
I used Gefoce9400GT , 190.53 nvidia driver, configuring Mulitiple X screen both CRT and TV, work fine if CRT and TV connected to card, but I hope foce TV-out output signal, means that if not connected to TV, the SVIDEO can output signal. Because the line too far, cannot detect TV connection, so I think foce output TV-out signal. I used Option "ConnectedMonitor" "CRT, TV". Can force found 2 display device, have 2 screen ok, but not display at TV if not connected TV. I do not understand why the TV has been forced output signal does not display images, they can be connected to the TV show?
View 2 Replies View RelatedI have the nvidia sound card built into my motherboard. Just a few hours ago it started to just stop making any noises what so ever. I rebooted but to no avail. I finally was able to find a fix by purging pulse AND alsa, then reinstalling them and rebooting. The problem is this will only allow my sound to work for about 10-15 mins. Kinda hard to watch "'Neath the Arizona Sky" if you gotta reboot every 15 minutes or so...
I have also purge and reinstalled ubuntu-desktop and that will work temporarily and extend me out another 10-15 mins from when it stopped, but then I still have to reboot.
I am using 10.10 Maverick 64 bit and have been using it for a while, this is the first time this or any other problem has occured.
I have been through the forums and checked every thread I could find with a Bingle search that was in any way related to random sound stoppage. I have tried most of them (did not try the ones that were specific to other cards as far as editing the .conf's for those cards)
Tonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:
Quote:
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686
[code]....
Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.
I have eee Box 1012 which I'm connecting a HDMI cable from it to my Yamaha reciever. When linux boots up and auto login I dont hear any sound.When I run Boxee or Skype I also don't hear any sound. I went to system setting and set the HW to HDMI out but still same resultsI really want this to work.I tried some of this here...I'm using Ubuntu 10.4 a fresh install and have run all patches. I also enabled the NVIDA driver
View 1 Replies View RelatedI just bought a new pc. It has plenty of hard drive space and ram with a 2.6GHz processor. I'm trying to run a dual-boot with Windows 7 and Linuxmint. I need some help as to how I go about installing my video driver. I have tried combinations of the following: -clicking on the taskbar icon that says "restricted drivers are available" and enabling the drivers -going to Software Manager/Drivers and choosing to install "NVidia 3D Drivers"
My efforts so far have only resulted in the following behavior: The screen changes from color into black-and-white and becomes unresponsive except to close it out The screen freezes up completely forcing me open up a terminal to kill the offending process (which turns out to be firefox)
The next thing I would like to try is to just go to the Nvidia website and downloading and installing the driver from there. It's a BIN file with a "run" extension. So I entered the command "chmod +x NVIDIA-Linux-x86-190.53-pkg1.run" followed by the command "./NVIDIA-Linux-x86-190.53-pkg1.run". But I get an error that says the following:
ERROR: You appear to be running an X server; please exit X before installing. WHAT IS AN X SERVER? HOW DO I CLOSE IT?? I've got nothing unusual open. Maybe a web page. I've tried closing out of everything except the terminal and I still get the same message.
I have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file
I have a zotac IONITX motherboard with HDMI video. The video seems fine, but I haven't been able to get the sound working through the HDMI cable. Even the little speaker at the top is gone. It was working fine when I had speakers hooked to the motherboard. I have installed the latest 256 driver from nvidia. If I run 'aplay -l' I get this:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1 Subdevice #0: subdevice #0
lspci -v gives :
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: PC Partner Limited Device 437b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
I don't know if this is important, but I noticed that it says its running an intel driver for my nvidia sound. Could this be the problem and if so, How do I fix it? Also, if I click on system->preferences->sound it comes up with a dialog box that says that its waiting for the sound system to come up. Why I am not getting any HDMI sound or even the little speaker icon at the top?
I'm trying to get a fresh install of Ubuntu 10.10 working with the closed Nvidia driver, as I would like to get the HDMI output working.
I have a Sony Vaio VPCCW18FX, with a Nvidia GT 230M graphics card. The open source nouveau driver works fine, but does not run smoothly. The only problem here is that it's needed to run with "nomodeset".
If i just activate the Proprietary Nvidia driver and reboot, it will hang after writing "Checking battery State [ok]". I have tried to add EDID from Windows partition, and here it hangs at a blank black/grey screen. I have tried hooking up an external display, no output on it either.
I am unable to enable desktop effects on ubuntu 10.04 32bit desktop , after installing Nvidia developer drivers 260.19.26. The output is shown below:
1)nvcc -V
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2010 NVIDIA Corporation
[code]....
I am running the newest Nvidia driver from nvidia.com, version 260.19.44. The built in proprietary Nvidia driver does not work properly.
Recently ubuntu was updated to a newer kernel 2.6.35.27 from 2.6.35.25. Under 2.6.35.25 the driver is working. Under 2.6.35.27 the desktop is not starting, and I can login to a 'console'. After login i try to run startx, and gets some errors. See attached Xorg.0.log.