I can't get the sound working at my laptop (HP Pavilion DV6-1115es). Fist at all, the 'snd' module can't load. So I installed the kmod-alsa from elrepo. Now the modules load well (see below), but... The problem seems to be a device busy code...
View 3 RepliesI am running Debian Squeeze on a laptop and I cannot get sound to work on it. It detects theres 2 sound cards in alsamixer and under cards i see HDA-Intel - HA ATI SB and HDA ATI SB at 0x90400000 irq 16. I think HDA-Intel is suppose to be selected not what is currently selected which is HDA ATI SB. If thats not an issue I'm not sure what is and I've tried reinstalling Squeeze and it still hasn't fixed the issue.
View 10 Replies View RelatedMy sound does not work on my HP laptop I have "Ati mobility radeon HD2600 256mb" as graphic/sound card pherhaps I must install the drivers for the card manually? And how do I do that?
View 3 Replies View RelatedI've searched through the forums and tried the solutions given but couldn't get my sound to work I have a HP pavilion dv7 laptop and I'm running Lucid Lynx. I get the following output when I run the alsa-info bash script found in another thread:
[Code].....
I've been struggling to get my sound to work properly in my HP dv7 laptop in Ubuntu 9.10 64-bit.
If I follow the instructions here [URL] then I can get my microphone to work.
My speakers worked fine right out of the box, but the headphone jack does not. When I follow the instructions here [URL] and install the alsa backports then my headphone jack works properly, but when I shutdown my computer I get a loud crackling/popping sound. Uninstalling the alsa backports stops the crackling, but then the headphone jack doesn't function.
I use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
View 5 Replies View RelatedI am running fedora 14 64 bit on Dell Inspiron. All of a sudden sound from speakers is not coming. They work in windows. I am suspecting some update with pulseaudio. However, earplugs work.
View 6 Replies View RelatedI have an issue where my laptop speakers work just fine, but when I plug in headphones, I get no noise. I'm using openSUSE 11.4.I found others with the same issue, but this guy's solution looks like he might be using some different version and his solution doesn't work (can't find the file he edited).
View 7 Replies View RelatedI have a problem with my sound card Microphone is working, headphones work but with kind of a low audio output, laptop speakers do not work at all. I have checked alsamixer and pulseaudio nothing is muted, tried all sort of different combinations and pulseaudio actually sees that mplayer for example is playing music, or skype is in videocall and using the sound device, but nothing is coming out of the speakers.
Laptop is Sony Yseries VPCYB15AG Alsa-info is [URL] Audio Device is 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) Drivers Loaded are :
[Code]....
i have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
View 2 Replies View RelatedI got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
setting up CentOS 5.3 (x86_64) on a Dell Vostro 420 Workstation, I came across a few problems/questions:
1. I am using software RAID1 (including sda and sdb), following the tutorial on CentOS Wiki. However, in my case, GRUB wants to install on /dev/md0 (the RAID device mounted as /boot) instead of /dev/sda (which would be the MBR, as usual). This is confusing, since installing to a partition is completely different from installing to the MBR. I suspect it *does* write to the MBR since the system does boot afterwards and the MBR was empty before. So maybe /dev/md0 is just a bit imprecise If yes, is the MBR still written to sda only, so that it is necessary to setup grub on sdb separately, as indicated in the documentation?
2. Sound does not work. The sound controller (ICH10 family) seems to be recognized, but the sound test behaves strangely: Normally, you have the three test sounds, and only after that a window will appear asking for confirmation. On my machine, the confirmation window appears immediately (!) so it seems the system is not even trying to play the sounds. Very strange...
3. I am seeing this damned "BIOS Bug: MCFG area at f0000000 is not E820-reserved" message. (May or may not be related to issue #2) It seems many people have this problem, but there is no real solution. In few cases, a BIOS update did the trick, but I think most hardware manufacturers are not even considering this a bug as long as there are no problems in Windows. It does seem to depend on the distribution, however, so newer kernels obviously have learned to handle the situation. Is this being considered by the upstream provider? Switching to Fedora is not really an option here
Forgive my newness, but here goes. I installed CentOS 5.5 on a Dell with a Soundblaster card. The soundcard config utility recognizes the device as:
Vendor: Creative Labs
Model: CA0106 SoundBlaster
Module: snd-ca0106
I am able to play the default sound in the utility, however, I get no sound when I select the device in Skype as Default Device CA0106. Is there a permission somewhere I am missing, because I noticed when I try to play an internet radio stream using Shockwave Flash, I also have no audio.
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies View Relatedtrying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
Below is the output from lspci :
Output of lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
[Code]...
My laptop, which is running Ubuntu 9.10, will periodically make a sound that sounds like someone is plugging something into a sound jack. I will try to get a recording of it, but that doesn't seem likely anytime soon. I tried disabling my internal mic, and that didn't fix it. It makes it even when my speakers are muted, which makes me think it's because some hardware is not correctly configured. I have an HP dv6236us laptop.
Here is my lspci output. Dunno if it will help, but it can't hurt: Code: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
I have installed Ubuntu 9.04 on my HP dv5-1235dx laptop, can play music but no sound is heard from the speaker
View 5 Replies View RelatedI just got a new Laptop, HP Compaq Presario CQ42, I installed Ubuntu 10.04LTS and all is running fine but no Sound from the in-build Speakers or Head-Phones. I replaced Ubuntu with Fedora13 and Sound works fine. how to get the Sound working in Ubuntu? All Sound-Settings in Ubuntu are set to 100%, nothing muted.
View 4 Replies View RelatedI got a new (used) Sony Vaio VGN-SZ440, I installed Slackware-current x86. Everything pretty much worked out of the box, including wireless. The only thing that is not working is my sound (It is not muted I already checked :-p). Here is my lspci output:
Code:
root@darkstar:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
I installed debian stable but after the install i get no sound from the laptop speakers.my laptop is a acer aspire 9800 with intel hd audio.Headphone works correct with sound but not the internal speakers.the speakers are correct working in windows xp.I want a new better system than xp but if debian do not work with my internal speakers then it is a nogo.
View 2 Replies View RelatedThe sound on my system is really low. I am using a Toshiba Tecra M3 laptop with Intel sound.
Here is my uname info:
Code:
2.6.32.9-67.fc12.i686 #1 SMP Sat Feb 27 10:00:02 UTC 2010 i686 i686 i386 GNU/Linux
I tested both Rhythmbox and Gnome Mplayer. Both are low when using headphones and very low when using the laptop speakers. I checked the alsa configuration via alsamixer -c0 and everything looks good. I have attached my alsa-info.txt file.
I installed a fresh 11.2 and perform a Stable KDE update and a complete update with "Yast Online Update" and now there is no sound in my laptop.
My sound card is HDA Intel and uses snd_hda_intel driver.
I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted).
It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. code...
This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)
I upgraded to Lucid a week or two ago. Sound has worked fine, then suddenly, yesterday, I have no sound for any application. The Gnome sound applet shows the volume normally, and have the Mute All option greyed out (not selectable). Nothing stands out as wrong or unusual under sound preferences, and I didn't change anything, although I did recently install a set of updates. There is no physical mute button on this laptop. IT is not account-specific, there are no sound effects even before you log in.
As well, since the upgrade I have intermittently not had the networking icon in the notification area appear, it is covered over by a fragment of some other graphic. It is most usable with the Human these, it is completely unusable with any of the new themes. Anyone know a fix for either of these two issues, especially the first?
Finding Lucid extremely flaky, particularly the signature themes. I like some aspects of it, such as the fact the wireless button on my laptop works now, but overall, not an impressive effort - someone whose first introduction to Ubuntu is Lucid and sees that the notification area doesn't even work correctly is not likely to stick around.