I just installed ubuntu on my laptop the problem is after i press restart the cd comes out and it said to press enter which i did then the computer restarts and loads some kind of command prompt it asks me for user name than password i log in but after that i dont know what to do it dosent even boot to main screen.
I tried with ubutu desktop 64X and netbook still no luck...Im using sony vaio laptop its 64X 4gb ram 320 hardrive
Have been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...
View 1 Replies View RelatedI tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
ubuntu 11.04 and 10.10 not boot in my lap top , but 10.04 boot well.
View 1 Replies View RelatedI have been working on this for 2 days and I am ready give this one up!! I have an old 'hp omnibook 6000' It's an Intel mother board. I believe it has 4 or 5 GB hard drive. 512 RAM, put that in myself. I can load live-cd's and all is good. I have tried: Xubuntu-alternate 7.04 and the desktop cd. Puppy Linux loaded up ok and all was working. Dam Small Linux loaded ok. Each time I reboot after install of mentioned os, all I get is a flashing cursor upon reboot. I know each one installed as gparted has shown me. When I install I 'erase and use entire disk'.
View 2 Replies View RelatedI just recently bought a Toshiba L505-ES5033 and can not get ubuntu (or fedora 12 32 or 64) to boot from the live cd, or install. I can get to the initial menu that asks me if I want to try without changes and all that but from that point nothing really. If I choose any options other than the help option it runs through some scripts and gives me an error. The error refuses to stay on the screen despite my constant demands that it does; all I THINK I can make out is MIRR... configuration error. Fedora tells me something entirely different. After this error it goes to a faded black screen and I can hear my HDD making angry sounds.
View 1 Replies View RelatedI have Windows 7 and Ubuntu 10.04 set up in dual-boot on my laptop. Since I am giving this laptop to someone who has no need for Ubuntu at the end of the summer, I wanted to change the Grub boot menu so that Win7 will load immediately and skip the menu. However, I still want Ubuntu to remain on the computer. I read that holding shift during or after the boot splash would force the menu to load, but that doesn't seem to be working for me. I could fix this if I had access to the Ubuntu side, but alas, I don't. I just tried loading up a Live CD and editing the /etc/default/grub file, but I can't run update-grub afterwards.
View 9 Replies View RelatedI installed an update on my Dell D800 last night and now it won't boot. Attaching a pic of the screen. I'm sure I have not included enough info
View 7 Replies View RelatedPackage: installation-reports Boot method: CD
Image version: ubuntu-10.04.1-desktop-i386
Date: 1 oct 1600h
[code]....
Output of lspci and lspci -n: unsure Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install
[code]....
Enter 'help' for a list of built in commands.
(initramfs) can not mount /dev/loop0 (/cdrom/casper/filesystem-squaslfs) on //filesystem.squaslifs"
I have retried many times, using different disc, different boot method from the CD menu but consistantly get to this screen.
Since my wife just bought a new laptop I decided to polish her old (decrepit) machine a little and let my daughter have it. It was dual partitioned XP and Ubuntu 8.04 (which worked flawlessly). I figured that since it was older I'd load Xubuntu. I made a DVD of Xubuntu 10.04 that passed checksum. When I tried to boot from the DVD I got as far as the menu asking me if I wanted to boot from the DVD, install from the DVD, etc. Whatever I picked the machine seemed to think a while, then hang on a black screen.
So, I got an Ubuntu 10.04 CD from a book I'd just bought, and tried that. It behaved identically- after the option menu whether I tried to boot from CD or install, it hung on a black screen. So, I booted 8.04, and fired up the Update Manager, and loaded all recommended updates (as is generally my habit). Then I clicked the button to update to 10.04, all of which progressed as expected over the course of a few hours, until the reboot. At this point it did the same thing! GRUB loads, and I pick Ubuntu 10.04, then I get the word "Ubuntu" in the middle of the screen with several dots under it (the boot splash?) for a split second, then it hangs on a black screen.
If I boot Ubuntu 10.04 in recovery mode that DOES seem to work, and I get a command prompt. But fixing this via command prompt is WAY beyond my weak Ubuntu kung-fu.
The machine is:
Averatec 1000 series
Intel Celeron (R)M 1.00GHz
504MB RAM
Intel(R) 82852/82855 GM/GME graphics controller
Which seems to meet minimum system requirements.
Oh, and XP SP3 boots just fine.
But I'd be happy if I could single-install some version of Ubuntu, and screw the dual-boot capability with XP, if that makes any difference.
I have got rid of windows 7 of my laptop and installed Ubuntu 10.10. So for the past week or so have done a lot o testing and stuff. Laptop I have is hp pavilion tx 2000 model tx 2130ea. Problem I have is laptop wont boot when unplugged but boots when plugged in. When it starts up you can hear the logo music but screen remains black. Now I have found what the problem is after hours of fault finding. Ubuntu detects the additional drivers to download wireless driver etc., and a couple of nvidia 2d/3d drivers so its when one these nvidia drivers are installed is what causes the problem when booting up unplugged. No problem when plugged in. At the moment I just have not installed these nividia drivers and all is good. Graphics Card Nvidia Geforce Go 6150.
View 7 Replies View RelatedI tested a month ago with my bro's PC and really liked it a lot. I downloaded 10.10 version from net. But i found out that my CD ROM drive is not able to read any CDs any more and my laptop doesn't have USB boot option. My laptop is a Pentium 4 with 1.5 GB RAM and is running Windows XP Professional SP 3. I have created 15 GB unallocated space for Ubuntu but don't know how to install in this situation.
View 2 Replies View RelatedI recently bought my self a Acer aspire 5552G, and now I'm trying to get the latest Ubuntu on it. I put the ubuntu on a USB drive and inserted it to my laptop. I changed boot orders so that all USB devices would come first. Now if I changed only one USB device to boot first (the one where my USB was inserter, as it indicated it had SanDisc in it) It didn't do anything, it still booted up the Linpus linux ditro wich was installed on the laptop when I got it. It has no GUI and I can't do anything with it.
If I changed all USB devices to the top list of booting, the laptop started and then a text comes on the screen :
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al.
And now it just stays like that and no matter what I press, nothing happens.
Laptop HP G62-140US - BIOS Hewlette-Packard F.07, 10/2/2010.
Has Windows 7 Home 64 bit. Processor Intel i-3 2.1 GHz. Memory 4 GB. Hard disk 250 GB
Was not able to boot Ubuntu 9.04 from the DVD drive ('Broken Bios' error). Was able to boot Ubuntu 10.10 Seemed OK and so made a USB stick for booting.
This also worked on 2 occasions and after about a week cannot boot either from DVD drive or from USB stick. No upgradation of BIOS or Windows 7 was made.
Trying to boot from DVD drive got 'Broken Bios' error and with USB the error screen goes off too quickly and therefter the loading goes for ever.
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
View 9 Replies View RelatedI have a really old sony vaio and the disk drive does not work, it does not have the option to boot from usb so im kind of stuck. Is there any other way I can install unbuntu through windows xp?
[code]...
I've just acquired a Vaio PCG-FX801 with Phoenix bios version R0121K5.In the boot order, it lists "+Removable Devices", but on expanding the menu, only gives "Legacy Floppy Drives".I only discovered this after unsuccessfully trying to boot from a stick with the 10.10 netbook iso on it.Is it possible to get round this,or should I put the iso on a cd,or should I download the desktop iso onto a cd, and use that? I want to try it out on this laptop before installing it.
View 8 Replies View RelatedOn duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies View RelatedI'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
View 6 Replies View RelatedI have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz
Memory: 1GB
ROM Date & revision: 01/07/2011, 68PVI Ver. F.09
Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
I will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
View 5 Replies View RelatedI have a laptop with two hdds. Winsows XP is loaded on the first, and I used the second hdd to play around with linux distros. I had Linux Mint and Zorin installed on the second hdd and everything was working fine. I decided I wanted to go back to Ubuntu 10.10, so I installed it to the second hdd, overwriting everything on it. Everything seemed to go fine, but when I went to restart from the install, I got some sort of I/O error and since then my laptop wont boot at all. I have tried telling it to boot from different hdds n the Windows BIOS. I have also tried 2 different live dvds of Ubuntu 10.10, all to no avail. All I get is a blank screen with a flashing cursor.
View 2 Replies View RelatedI've been running Ubuntu on my Acer 5100 laptop for about a year and a half. The latest version I had was 10.10 when my disk crashed and burned and had to be replaced. This was an external hard drive as my internal one died long ago and I'm too lazy to replace it. So things were fine until the crash. Bought a new hard drive today (same brand and model as the one the system was installed on before), downloaded 10.10 and installation goes fine. Then, in the end, I am told 'you need to reboot in order to use your new system'. So I say yes and the system ejects the CD-ROM and starts the shutdown process. Then it gets to doing something with the CD-ROM (/sr0) and it gets an IO error. Of course this is because the thing was ejected! So I get this loooong list of IO errors (all the same) on device sr0 and I have to manually reboot the system by the power button.
The system starts to come up, I see the BIOS hit the external drive, and nothing. It sits there with a blinking cursor at the top left of the screen and does nothing. Now, I've looked at a few things: 1: I've made sure the external drive is the first boot device. 2. I've made sure the disk was actually good and not damaged. 3. I've made sure the ISO I downloaded has the same hash as the one I got I've even tried the install on ANOTHER drive and the same thing happens! I know 10.10 can run on this system as it HAS in the past with no problems at all.
I have tried 11.04 and 10.10 64 bit and after I install the OS my laptop will not boot. The install goes great after being booted from a USB but after the install when it tries to boot from the HDD all that happens is the screen lights up and goes dark repeatedly.
View 3 Replies View RelatedMy laptop won't boot. Lights come on and I can hear disks try to "wind up" and then nothing. No display on the screen either at any point. Doesn't matter if I have LiveCD in or not.
View 5 Replies View RelatedI turned on my laptop today, but nothing came on the screen, and it was just black like it would be as if I didn't turn it on at all. Usually it shows my processor logo and makes a beep noise before it shows up my bootloader, but now it doesn't. I can hear the fan running, though. I tried to open the CD drive to try and boot with a LiveCD, but the CD drive doesn't open anymore even when it's on. The power light is on and everything looks normal, but nothing is happening and I can't even open my CD drive. I tried taking out the battery, RAM, and HDD then putting it back in, but still nothing.
View 13 Replies View RelatedI have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
View 4 Replies View RelatedAfter several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
how to set at least my headphone/lineout socket precisely to -15dB at boot up? If I knew how to make amixer commands permanent, I wouldn't be re-raising the issue
The Gnome GUI volume control is fine in normal circumstances but to set it accurately requires a bit too much fiddling, IMO - now if someone were to adjust the programming so a dB readout accompanies slider movement, rather than as a pop-up after adjusting the slider, 'twould be more ergonomic, IMO.
I installed Ubuntu 10.10 to dual boot alongside Windows 7 on a Dell Inspiron. This worked fine and after restarting it seemed to be working normally, after the first boot into windows though when I tried to restart the laptop again I just get a blank screen with a blinking cursor in the top left instead of the grub screen.I'm still able to boot the LiveCD fine and tried to reinstall Ubuntu but the exact same thing happened? Anyone know what's going on/how to fix this?
View 9 Replies View Related