Ubuntu Installation :: Laptop Won't Boot After Install
Jun 22, 2011
I've been running Ubuntu on my Acer 5100 laptop for about a year and a half. The latest version I had was 10.10 when my disk crashed and burned and had to be replaced. This was an external hard drive as my internal one died long ago and I'm too lazy to replace it. So things were fine until the crash. Bought a new hard drive today (same brand and model as the one the system was installed on before), downloaded 10.10 and installation goes fine. Then, in the end, I am told 'you need to reboot in order to use your new system'. So I say yes and the system ejects the CD-ROM and starts the shutdown process. Then it gets to doing something with the CD-ROM (/sr0) and it gets an IO error. Of course this is because the thing was ejected! So I get this loooong list of IO errors (all the same) on device sr0 and I have to manually reboot the system by the power button.
The system starts to come up, I see the BIOS hit the external drive, and nothing. It sits there with a blinking cursor at the top left of the screen and does nothing. Now, I've looked at a few things: 1: I've made sure the external drive is the first boot device. 2. I've made sure the disk was actually good and not damaged. 3. I've made sure the ISO I downloaded has the same hash as the one I got I've even tried the install on ANOTHER drive and the same thing happens! I know 10.10 can run on this system as it HAS in the past with no problems at all.
View 4 Replies
ADVERTISEMENT
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
View Related
Jul 26, 2011
I have tried 11.04 and 10.10 64 bit and after I install the OS my laptop will not boot. The install goes great after being booted from a USB but after the install when it tries to boot from the HDD all that happens is the screen lights up and goes dark repeatedly.
View 3 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
Apr 7, 2010
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies
View Related
May 8, 2010
I have a new laptop that I can install ubuntu on without hassle using a cd. I wanted to put it on my older Toshiba laptop (2003) for my little cousin to use to get on the internet and play games. When I boot from the CD the ubuntu logo comes up runs. It ask me my language then goes to the screen where I can choose "Try Ubuntu without installing it" "Install Ubuntu Now" etc. Ive tried clicking both install and try both launch the ubuntu logo it runs for about 4 min and then hangs on a black screen. I know it isn't the cd because I can use it on any other computer and it works. This Toshiba cannot boot from a jump drive though so that choice is out.
View 3 Replies
View Related
Oct 11, 2010
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
View 3 Replies
View Related
Mar 21, 2011
I recently bought my self a Acer aspire 5552G, and now I'm trying to get the latest Ubuntu on it. I put the ubuntu on a USB drive and inserted it to my laptop. I changed boot orders so that all USB devices would come first. Now if I changed only one USB device to boot first (the one where my USB was inserter, as it indicated it had SanDisc in it) It didn't do anything, it still booted up the Linpus linux ditro wich was installed on the laptop when I got it. It has no GUI and I can't do anything with it.
If I changed all USB devices to the top list of booting, the laptop started and then a text comes on the screen :
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al.
And now it just stays like that and no matter what I press, nothing happens.
View 1 Replies
View Related
Mar 16, 2011
I am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
View 1 Replies
View Related
Dec 11, 2010
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
View 3 Replies
View Related
Jan 2, 2010
I have been working on this for 2 days and I am ready give this one up!! I have an old 'hp omnibook 6000' It's an Intel mother board. I believe it has 4 or 5 GB hard drive. 512 RAM, put that in myself. I can load live-cd's and all is good. I have tried: Xubuntu-alternate 7.04 and the desktop cd. Puppy Linux loaded up ok and all was working. Dam Small Linux loaded ok. Each time I reboot after install of mentioned os, all I get is a flashing cursor upon reboot. I know each one installed as gparted has shown me. When I install I 'erase and use entire disk'.
View 2 Replies
View Related
Mar 11, 2010
I just recently bought a Toshiba L505-ES5033 and can not get ubuntu (or fedora 12 32 or 64) to boot from the live cd, or install. I can get to the initial menu that asks me if I want to try without changes and all that but from that point nothing really. If I choose any options other than the help option it runs through some scripts and gives me an error. The error refuses to stay on the screen despite my constant demands that it does; all I THINK I can make out is MIRR... configuration error. Fedora tells me something entirely different. After this error it goes to a faded black screen and I can hear my HDD making angry sounds.
View 1 Replies
View Related
Oct 24, 2010
Since my wife just bought a new laptop I decided to polish her old (decrepit) machine a little and let my daughter have it. It was dual partitioned XP and Ubuntu 8.04 (which worked flawlessly). I figured that since it was older I'd load Xubuntu. I made a DVD of Xubuntu 10.04 that passed checksum. When I tried to boot from the DVD I got as far as the menu asking me if I wanted to boot from the DVD, install from the DVD, etc. Whatever I picked the machine seemed to think a while, then hang on a black screen.
So, I got an Ubuntu 10.04 CD from a book I'd just bought, and tried that. It behaved identically- after the option menu whether I tried to boot from CD or install, it hung on a black screen. So, I booted 8.04, and fired up the Update Manager, and loaded all recommended updates (as is generally my habit). Then I clicked the button to update to 10.04, all of which progressed as expected over the course of a few hours, until the reboot. At this point it did the same thing! GRUB loads, and I pick Ubuntu 10.04, then I get the word "Ubuntu" in the middle of the screen with several dots under it (the boot splash?) for a split second, then it hangs on a black screen.
If I boot Ubuntu 10.04 in recovery mode that DOES seem to work, and I get a command prompt. But fixing this via command prompt is WAY beyond my weak Ubuntu kung-fu.
The machine is:
Averatec 1000 series
Intel Celeron (R)M 1.00GHz
504MB RAM
Intel(R) 82852/82855 GM/GME graphics controller
Which seems to meet minimum system requirements.
Oh, and XP SP3 boots just fine.
But I'd be happy if I could single-install some version of Ubuntu, and screw the dual-boot capability with XP, if that makes any difference.
View 6 Replies
View Related
Mar 9, 2011
I tested a month ago with my bro's PC and really liked it a lot. I downloaded 10.10 version from net. But i found out that my CD ROM drive is not able to read any CDs any more and my laptop doesn't have USB boot option. My laptop is a Pentium 4 with 1.5 GB RAM and is running Windows XP Professional SP 3. I have created 15 GB unallocated space for Ubuntu but don't know how to install in this situation.
View 2 Replies
View Related
Mar 25, 2011
Laptop HP G62-140US - BIOS Hewlette-Packard F.07, 10/2/2010.
Has Windows 7 Home 64 bit. Processor Intel i-3 2.1 GHz. Memory 4 GB. Hard disk 250 GB
Was not able to boot Ubuntu 9.04 from the DVD drive ('Broken Bios' error). Was able to boot Ubuntu 10.10 Seemed OK and so made a USB stick for booting.
This also worked on 2 occasions and after about a week cannot boot either from DVD drive or from USB stick. No upgradation of BIOS or Windows 7 was made.
Trying to boot from DVD drive got 'Broken Bios' error and with USB the error screen goes off too quickly and therefter the loading goes for ever.
View 1 Replies
View Related
May 10, 2010
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
View 9 Replies
View Related
Aug 21, 2010
I have a really old sony vaio and the disk drive does not work, it does not have the option to boot from usb so im kind of stuck. Is there any other way I can install unbuntu through windows xp?
[code]...
View 9 Replies
View Related
Dec 17, 2010
I've just acquired a Vaio PCG-FX801 with Phoenix bios version R0121K5.In the boot order, it lists "+Removable Devices", but on expanding the menu, only gives "Legacy Floppy Drives".I only discovered this after unsuccessfully trying to boot from a stick with the 10.10 netbook iso on it.Is it possible to get round this,or should I put the iso on a cd,or should I download the desktop iso onto a cd, and use that? I want to try it out on this laptop before installing it.
View 8 Replies
View Related
Dec 21, 2010
On duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies
View Related
Feb 10, 2011
I'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
View 6 Replies
View Related
Feb 17, 2011
I have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz
Memory: 1GB
ROM Date & revision: 01/07/2011, 68PVI Ver. F.09
Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
View 3 Replies
View Related
Mar 8, 2011
I will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
View 5 Replies
View Related
Apr 13, 2011
I have a laptop with two hdds. Winsows XP is loaded on the first, and I used the second hdd to play around with linux distros. I had Linux Mint and Zorin installed on the second hdd and everything was working fine. I decided I wanted to go back to Ubuntu 10.10, so I installed it to the second hdd, overwriting everything on it. Everything seemed to go fine, but when I went to restart from the install, I got some sort of I/O error and since then my laptop wont boot at all. I have tried telling it to boot from different hdds n the Windows BIOS. I have also tried 2 different live dvds of Ubuntu 10.10, all to no avail. All I get is a blank screen with a flashing cursor.
View 2 Replies
View Related
Oct 19, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed.
View 1 Replies
View Related
Jan 12, 2011
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies
View Related
Jul 15, 2010
I have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
View 4 Replies
View Related
Oct 25, 2010
After several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
View 4 Replies
View Related
Jan 14, 2011
I used a cd version of ubuntu 10.4 but my laptop wouldn't boot.I thought of installing the previous version of ubuntu and then upgrade it.I used ubuntu 9 and it worked perfectly. But when the upgrade finished and my pc restarted it showed this message [1.007098] Disabling IRQ#4
View 7 Replies
View Related
Apr 24, 2011
Is there a way to boot Ubuntu 10.04 and have the bluetooth radio automatically turned off (but available to turn on if/when needed)?
View 7 Replies
View Related
Apr 25, 2011
Fed up with Windows and ready to become a Linux convert. Here's the only problem:
I've created no less than four separate Live USB distros - all using different USB sticks -
yet my HP Pavilion dv7 refuses to recognize any of them as "bootable devices."
1) Have formatted USB sticks in FAT16 & FAT32 - neither made a difference.
2) Have created bootable USB sticks using Ubuntu Minimal Live install; Ubuntu full Live install; PuppyLinux Live install; even a simple gparted live install - none will boot.
3) Have checked & re-checked that BIOS is set to boot first from USB drive device.
4) 2 of the 4 USB sticks are new, fresh out of the packaging; and 3 of the 4 USB sticks are each from different manufacturers - so I'm fairly certain it's not a issue of a particular brand being incompatible, nor is it due to the sticks being corrupted somehow.
5) Each of the 4 live distros appears to have downloaded just fine - all necessary files appear to be in order.
6) Have tried using Unetbootin, Ubuntu's own live usb tool, and 1 or 2 others - all have failed to boot my HP laptop.
7) Have even tried removing all non-essential hardware before booting - even booting with no hard drives installed - system still returns the error "no bootable device detected."
This laptop is only 2 years old; I know it should be able to boot from USB. I can boot from a (rather old) SliTaz distro on CD just fine - but I need a persistent USB stick so I can easily add packages as needed, etc...s.
View 9 Replies
View Related
