Hardware :: Laptop Does Not Boot Up?
Feb 4, 2009
I turned on my laptop today, but nothing came on the screen, and it was just black like it would be as if I didn't turn it on at all. Usually it shows my processor logo and makes a beep noise before it shows up my bootloader, but now it doesn't. I can hear the fan running, though. I tried to open the CD drive to try and boot with a LiveCD, but the CD drive doesn't open anymore even when it's on. The power light is on and everything looks normal, but nothing is happening and I can't even open my CD drive. I tried taking out the battery, RAM, and HDD then putting it back in, but still nothing.
View 13 Replies
ADVERTISEMENT
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
View Related
Mar 3, 2010
Have been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...
View 1 Replies
View Related
Mar 31, 2011
I just installed ubuntu on my laptop the problem is after i press restart the cd comes out and it said to press enter which i did then the computer restarts and loads some kind of command prompt it asks me for user name than password i log in but after that i dont know what to do it dosent even boot to main screen.
I tried with ubutu desktop 64X and netbook still no luck...Im using sony vaio laptop its 64X 4gb ram 320 hardrive
View 2 Replies
View Related
May 3, 2011
ubuntu 11.04 and 10.10 not boot in my lap top , but 10.04 boot well.
View 1 Replies
View Related
Mar 7, 2010
My laptop won't boot. Lights come on and I can hear disks try to "wind up" and then nothing. No display on the screen either at any point. Doesn't matter if I have LiveCD in or not.
View 5 Replies
View Related
Jun 10, 2009
I just installed Fedora 11 on my HP Compaq laptop that had the original factory disk layout (Vista, a big 290GB partition and two other for rescue stuff).
The procedure was the following:
1. I resized the largest partition from 290GB to 270GB using gParted. I could boot normally to Vista after that;
2. Installed Fedora normally using the free 20GB.
After the installation I cannot boot anymore. After the BIOS post the text message shows up:
Non-System disk or disk error replace and strike any key when ready
Did any of you come across this problem before? Is there anything I can do to fix it or at least be able to log into Vista (this is my work laptop...)?
View 4 Replies
View Related
Jan 27, 2010
I have an Acer Aspire 3680 with Fedora 12 on it which has been running just fine until I did some updates last night then shut down and tried to turn it on this afternoon.Whenever I try to boot up my laptop I get the following error message:
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Boot has failed, sleeping forever.
[code]....
View 11 Replies
View Related
Jun 12, 2010
My fedora 12 laptop will no longer boot properly. i get my bios screen, then the fedora intro screen (with the f / infinity symbol on a blue background) after a brief blank screen, then i get a blank screen with a blinking cursor. i can type things but nothing happens when i do, and the computer never exits out of that screen.
is there anything i can do to correct this problem short of a reinstall? i really hate to lose some of the drivers i went to a lot of trouble to find and install as well as some software and some user files.
p.s.: the last thing i did before the problem was to use yum to install quite a few fonts (xorg-...) but it ran after that and i think even went through one reboot with no problems.
View 14 Replies
View Related
Jan 2, 2010
I have been working on this for 2 days and I am ready give this one up!! I have an old 'hp omnibook 6000' It's an Intel mother board. I believe it has 4 or 5 GB hard drive. 512 RAM, put that in myself. I can load live-cd's and all is good. I have tried: Xubuntu-alternate 7.04 and the desktop cd. Puppy Linux loaded up ok and all was working. Dam Small Linux loaded ok. Each time I reboot after install of mentioned os, all I get is a flashing cursor upon reboot. I know each one installed as gparted has shown me. When I install I 'erase and use entire disk'.
View 2 Replies
View Related
Mar 11, 2010
I just recently bought a Toshiba L505-ES5033 and can not get ubuntu (or fedora 12 32 or 64) to boot from the live cd, or install. I can get to the initial menu that asks me if I want to try without changes and all that but from that point nothing really. If I choose any options other than the help option it runs through some scripts and gives me an error. The error refuses to stay on the screen despite my constant demands that it does; all I THINK I can make out is MIRR... configuration error. Fedora tells me something entirely different. After this error it goes to a faded black screen and I can hear my HDD making angry sounds.
View 1 Replies
View Related
Jun 5, 2010
I have Windows 7 and Ubuntu 10.04 set up in dual-boot on my laptop. Since I am giving this laptop to someone who has no need for Ubuntu at the end of the summer, I wanted to change the Grub boot menu so that Win7 will load immediately and skip the menu. However, I still want Ubuntu to remain on the computer. I read that holding shift during or after the boot splash would force the menu to load, but that doesn't seem to be working for me. I could fix this if I had access to the Ubuntu side, but alas, I don't. I just tried loading up a Live CD and editing the /etc/default/grub file, but I can't run update-grub afterwards.
View 9 Replies
View Related
Sep 5, 2010
I installed an update on my Dell D800 last night and now it won't boot. Attaching a pic of the screen. I'm sure I have not included enough info
View 7 Replies
View Related
Sep 26, 2010
Package: installation-reports Boot method: CD
Image version: ubuntu-10.04.1-desktop-i386
Date: 1 oct 1600h
[code]....
Output of lspci and lspci -n: unsure Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install
[code]....
Enter 'help' for a list of built in commands.
(initramfs) can not mount /dev/loop0 (/cdrom/casper/filesystem-squaslfs) on //filesystem.squaslifs"
I have retried many times, using different disc, different boot method from the CD menu but consistantly get to this screen.
View 9 Replies
View Related
Oct 24, 2010
Since my wife just bought a new laptop I decided to polish her old (decrepit) machine a little and let my daughter have it. It was dual partitioned XP and Ubuntu 8.04 (which worked flawlessly). I figured that since it was older I'd load Xubuntu. I made a DVD of Xubuntu 10.04 that passed checksum. When I tried to boot from the DVD I got as far as the menu asking me if I wanted to boot from the DVD, install from the DVD, etc. Whatever I picked the machine seemed to think a while, then hang on a black screen.
So, I got an Ubuntu 10.04 CD from a book I'd just bought, and tried that. It behaved identically- after the option menu whether I tried to boot from CD or install, it hung on a black screen. So, I booted 8.04, and fired up the Update Manager, and loaded all recommended updates (as is generally my habit). Then I clicked the button to update to 10.04, all of which progressed as expected over the course of a few hours, until the reboot. At this point it did the same thing! GRUB loads, and I pick Ubuntu 10.04, then I get the word "Ubuntu" in the middle of the screen with several dots under it (the boot splash?) for a split second, then it hangs on a black screen.
If I boot Ubuntu 10.04 in recovery mode that DOES seem to work, and I get a command prompt. But fixing this via command prompt is WAY beyond my weak Ubuntu kung-fu.
The machine is:
Averatec 1000 series
Intel Celeron (R)M 1.00GHz
504MB RAM
Intel(R) 82852/82855 GM/GME graphics controller
Which seems to meet minimum system requirements.
Oh, and XP SP3 boots just fine.
But I'd be happy if I could single-install some version of Ubuntu, and screw the dual-boot capability with XP, if that makes any difference.
View 6 Replies
View Related
Feb 18, 2011
I have got rid of windows 7 of my laptop and installed Ubuntu 10.10. So for the past week or so have done a lot o testing and stuff. Laptop I have is hp pavilion tx 2000 model tx 2130ea. Problem I have is laptop wont boot when unplugged but boots when plugged in. When it starts up you can hear the logo music but screen remains black. Now I have found what the problem is after hours of fault finding. Ubuntu detects the additional drivers to download wireless driver etc., and a couple of nvidia 2d/3d drivers so its when one these nvidia drivers are installed is what causes the problem when booting up unplugged. No problem when plugged in. At the moment I just have not installed these nividia drivers and all is good. Graphics Card Nvidia Geforce Go 6150.
View 7 Replies
View Related
Mar 9, 2011
I tested a month ago with my bro's PC and really liked it a lot. I downloaded 10.10 version from net. But i found out that my CD ROM drive is not able to read any CDs any more and my laptop doesn't have USB boot option. My laptop is a Pentium 4 with 1.5 GB RAM and is running Windows XP Professional SP 3. I have created 15 GB unallocated space for Ubuntu but don't know how to install in this situation.
View 2 Replies
View Related
Mar 21, 2011
I recently bought my self a Acer aspire 5552G, and now I'm trying to get the latest Ubuntu on it. I put the ubuntu on a USB drive and inserted it to my laptop. I changed boot orders so that all USB devices would come first. Now if I changed only one USB device to boot first (the one where my USB was inserter, as it indicated it had SanDisc in it) It didn't do anything, it still booted up the Linpus linux ditro wich was installed on the laptop when I got it. It has no GUI and I can't do anything with it.
If I changed all USB devices to the top list of booting, the laptop started and then a text comes on the screen :
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al.
And now it just stays like that and no matter what I press, nothing happens.
View 1 Replies
View Related
Mar 25, 2011
Laptop HP G62-140US - BIOS Hewlette-Packard F.07, 10/2/2010.
Has Windows 7 Home 64 bit. Processor Intel i-3 2.1 GHz. Memory 4 GB. Hard disk 250 GB
Was not able to boot Ubuntu 9.04 from the DVD drive ('Broken Bios' error). Was able to boot Ubuntu 10.10 Seemed OK and so made a USB stick for booting.
This also worked on 2 occasions and after about a week cannot boot either from DVD drive or from USB stick. No upgradation of BIOS or Windows 7 was made.
Trying to boot from DVD drive got 'Broken Bios' error and with USB the error screen goes off too quickly and therefter the loading goes for ever.
View 1 Replies
View Related
Nov 29, 2010
I have a laptop that I have installed Slack-current on, I am currently using the usb image to boot from. Windows7 is installed on sda2 and sda2 has been marked with the bootable flag, I would like to use lilo to boot the laptop do i install lilo to sda or to sda2?Will win7 still be able to boot using lilo as the boot loader ?
Another issue i noted during install is that the kernel panicked using the dvd to install with an error stating it could not read from the booting device, I eventually used the usb-pxe install to load the system however since 13.1 i have not been able to load a system using the dvd.
View 8 Replies
View Related
Jun 10, 2010
My laptop brightness gets set to maximium each boot.
Just wondering if this is the case for other laptop users. I have a Lenovo Thinkpad SL500 (GeForce 9300M GS) and am running Testing.
Ideally I'd like it to remember my last setting (which is usually the lowest). It'd be nice not having to turn it down each time I reboot/power-on.
It actually starts off at a low setting but during the boot process (before gdm and just after the "Waiting for /dev" line I believe) it suddenly gets set to max.
View 3 Replies
View Related
Jan 20, 2009
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
View 2 Replies
View Related
Feb 5, 2009
I took a perfectly functioning Fedora 10 install on my Dell D410 laptop and did "yum update" on it. Now when it boots, all I get is POST and then the single word "GRUB" on the screen. What'd I do? How do I recover?
View 3 Replies
View Related
May 10, 2010
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
View 9 Replies
View Related
Aug 21, 2010
I have a really old sony vaio and the disk drive does not work, it does not have the option to boot from usb so im kind of stuck. Is there any other way I can install unbuntu through windows xp?
[code]...
View 9 Replies
View Related
Dec 17, 2010
I've just acquired a Vaio PCG-FX801 with Phoenix bios version R0121K5.In the boot order, it lists "+Removable Devices", but on expanding the menu, only gives "Legacy Floppy Drives".I only discovered this after unsuccessfully trying to boot from a stick with the 10.10 netbook iso on it.Is it possible to get round this,or should I put the iso on a cd,or should I download the desktop iso onto a cd, and use that? I want to try it out on this laptop before installing it.
View 8 Replies
View Related
Dec 21, 2010
On duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies
View Related
Feb 10, 2011
I'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
View 6 Replies
View Related
Feb 17, 2011
I have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz
Memory: 1GB
ROM Date & revision: 01/07/2011, 68PVI Ver. F.09
Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
View 3 Replies
View Related
Mar 8, 2011
I will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
View 5 Replies
View Related
