For the past few days now my mouse has automatically been scrolling when I am not trying to scroll anything (such as web pages, Word documents, etc).So I unplugged mouse and restarted. The same problem arises when mouse is not connected!
View 3 RepliesI have been battling this issues for about a year now. Kind of got tired of dealing with it, but inevitably I go away for vacation or something and I lose power at the fort then the system will not come back up on its own.
Every time (100%) I power my system on with the single USB cable connected to it, my system hangs. It did it on 8.x, 9.x and all versions of 10.x. I have asked the questions before, but never get anywhere with it. Finally I have found this Forum and figured out how to ask questions Weird, I know
Anyway.
The system goes through the BIOS check and gets to the GRUB loader. If I do nothing, it hangs with a black screen just after it says that it is loading the kernel.
If I change the kernel commands to include the noacpi=apic or most other common fixes for what I have been told, USB, I get to the same place seemingly.
In reading through the forums and a little testing, I find that if I remove the splash and the quiet commands (obviously snicker), I am able to see where it is really stopping, but does not make sense to me.
The last informational text that appears to be processed is one of
Registered Protocol Family 1
There is nothing in the SYSLOG, MESSAGES or DMESG at all for this boot. I would assume that the system is not to a point where we can log this data
This is an AMD Phenom II x4 running 10.04 64bit Ubuntu. The USB connected device is an Avocent KVM 4 port with Audio and USB.
I installed slackware 13.1 lately to a laptop. its a toshiba satellite m40 185 if it makes any difference. In any case, and while the touchpad works flawlessly, connecting a standard USB mouse to the pc does not power up the mouse (its a microsoft notebook optical mouse) and of course the mouse pointer does not follow the mouse's moves... no clicks either.
Basically when I do
Quote:
I don't see junk printed on my terminal, whereas moving around the touchpad I do see some.
Just to clarify, It's not just X that is not working, gpm doesn't get mouse moves from the usb mouse either (touchscreen works flawlessly in console too).
my xorg.conf looks like:
Quote:
I added the last 2 options after following this guide, which seems to cover concurrent read-in from more than 1 pointing devices.
All the other guides I found assume that you have a working gpm.
One question is: since with the new radeon drivers the xorg.conf file can be missing altogether and X will not cry, does it make any difference to add mouse options in xorg.conf?
Continuing my thought: it must be something else. Kernel doesn't seem to be the problem. The USB subsystem works since usb mass storage devices (that's all I have sitting around) are sensed by the kernel and udev properly. Additionally, the problem persists with the huge kernel.
Before slackware, I used to run fedora on the laptop and both pointing devices worked properly, however I think fedora uses another method of setting up the X server devices..
I just installed Ubuntu 10.10 on my HP Pavilion a320n computer with a ps2 mouse and the mouse pointer points with the bottom of the mouse and not the upper tip of the point. It does the same thing with Ubuntu 10.04.1. In Windows 7 and XP the mouse is normal. I don't know how I could adjust it or is this just a bug in the OS?
View 11 Replies View RelatedWhat is the mouse API to detect mouse buttons status? Or Is there any command to detect the mouse button status?
View 2 Replies View RelatedI have custom built Linux kernel (2.6.31) and also xorg. xorg is using xserver 1.7.3 . I have an application which simulates the mouse and sends mouse move events. When I switch the device on, the system boots and Xorg comes up, I can see X cursor on the system. When I start sending mouse move events from the application, the cursor do not move. If I attach mouse to the device and then move the mouse, from this point onwards the mouse events get detected from the simulation application. I have checked the dmesg log as follows
BEFORE MOUSE CONNECTED.
.....
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
[code]....
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies View RelatedI just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
View 1 Replies View RelatedBiggest one that make game unplayable is mouse. Mouse isn't moving smooth it jumps around. I cannot shoot anything. So i asked for help, and everybody just say install windows. And where is fun in that. If people when ever run into problem with some software on linux just install windows. Linux would never go forward. I m not some great gamer, but i would like to be able to play this game. Probably somebody run into same problem. I sow that people talk about something like dis on WOW and wine but simptoms doesn't seem same to me.
View 1 Replies View RelatedCNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20.
The only avalible resolution is 1600x900.
/etc/debian_version 8.1
GNOME Terminal 3.14.1
xnee 3.19
I'm running FC12 and GNOME.If I move the physical mouse about one inch, the mouse pointer moves across the entire screen.That's way too fast and way to sensitive.I prefer the mouse pointer to move far less distance on the screen when the physical mouse is moved.
From System->Preferences->Mouse, I set the various mouse Pointer Speed acceleration and Sensitivity to Slow, Fast, Low, High, and and I couldn't get it any better. At the least sensitive settings. if I move the physical mouse one inch, the mouse pointer moves across the entire screen.How can make the mouse pointer less sensitive to mouse movements?
I want to set a up a network of inter connected pcs, for example on pc A linux is installed.now pcs B, C , D, etc should connect to A and do there work, for example A want to do C/C++, development, whereas B wants to do some PERL development or whatever, this is just an example, 2 different pc users might do same work also, and the connecting pcs may have Windows or linux or bsd.OSes now what h/w or s/w is required and what steps are required to set up this network, main pc would be connected to internet and also connected pcs might want to use internet also..have installed opensuse edulife , and use this as PC A for testing.. and I use bridged dsl Broadband connection to connect to internet , by the username and password provided by the ISP, in windows its easy to setup this connection, however not able to do on linux,
View 9 Replies View RelatedIv'e got an issue with mouse speed, on boot the mouse is to fast, so I found that the command
Quote:
slows it down the way I need. But now, each boot I need to run it again. Is there a place where I can put it so it runs every time X starts? Also, googling a bit I found that udev rules can be used instead, but I don't know how to write it as a rule.
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies View RelatedI had been running "Etch" and upgraded to "Lenny". Now my mouse is NOT tracking correctly. When I move the mouse and then press and release the 'ctrl' key to show where the mouse pointer is the circle indicators are not where the pointer is. I therefore cannot make any selections from menus as 'lenny' thinks the mouse is somewhere other than where the pointer is. Also are there keyboard hot keys that i can use to access the menus?
View 1 Replies View Relatedjust want to report "Right Mouse Click Freeze" on Ubuntu 10.10. When I click on anything with my right mouse button to open options menu it freezes and does not open menu. Sometimes when I shake my mouse left/right a bit it opens that menu, but this does not work always. It seems like xserver issue, but I'm not sure since I'm not expert in linux yet. It's very annoying issue that I would like to resolve asap.
My System Specs:
Intel Core 2 Quad Q6600 @ 2.40GHz
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400)
Western Digital 250 GB Hard Drive
Ubuntu 10.10 64-bit (Kernel Linux 2.6.35-22)
(Used Desktop Install CD)
From Terminal how can i see who is connected on local lan
View 4 Replies View RelatedI've managed to install Deluge with webui using this link
[url]
Everything was fine and i did manage to connect to it
BUT it says not connected
Does it have anything to do with ports?
I've installed Ubuntu server edition 10.4 to one of my older computers and When I go to install something I get the error message Package could not be found. I'm assuming it's not connected to the internet. It doesn't Show up on my router. I'm trying to install Ubuntu-desktop using the code "sudo apt-get install ubuntu-desktop.
View 8 Replies View RelatedI have a wireless network that my PC connects to just fine. I did have to change my address to 10.10.10.1 (Cisco router)
How can I do that with Ubuntu?
I will need very specific directions, because I don't normally use Ubuntu.
My name is Shim and currently im using Ubuntu 10.4 LTS well currently i've been facing an irritating problem it actually also happened in my previous ubuntu version,well the problem that i've been having is that my system doesn't detect any USBs or external HDs attached to it. I have check around already but still couldnt find any solution to this problem, but i noticed that in other forums they would post their results using the command "dmesg" well here is mine:
Code:
[ 0.182802] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182805] vgaarb: loaded
[code]...
I installed ubuntu in my laptop. I cant able to use wifi in my laptop. Tell me how to configure the wifi in my laptop. My laptop model is aspiro 5378 (Acer).
View 7 Replies View RelatedWhen attempting to use my ircd, I am receiving the following message in irrsi:
Code:
-!- Irssi: Looking up 127.0.0.1
-!- Irssi: Connecting to 127.0.0.1 [127.0.0.1] port 6667
-!- Irssi: Connection to 127.0.0.1 established
-!- Irssi: !hybrid7.debian.local *** Looking up your hostname...
[Code]....
WiFi on this laptop worked fine for a few months then went out; after a reinstall of ubuntu (since 9.xx had come out since then anyway) the wireless still refused to even see networks, let alone connect to them; under Wireless Networks in the NM, I just see a greyed out 'disconnected'. This got me to thinking that it may have just been a hardware issue, but I find that hard to believe. Anyway, here's the pertinent information:
Started off with an lshw command just to see if a network adapter is even listed as being connected: `lshw`
Code:
id:
network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection[code]....
As an addendum : I found this driver project but they claim to require a 2.6.8+ kernel; a quick `uname -r` shows that mine is 2.6.31, and an `apt-cache search linux-image` reveals that to be the highest available from repos; do Debian/Ubuntu distros not use more recent kernels or is this an Ubuntu-specific kernel naming scheme? If so, to what would it be comparable? I'm hesitant to try to install this and change my firmware if it's likely I'll be borking something.
I seem to be having on going issues with my printer. I was able to print a garbled test page but I get a result from terminal of printer HP-Deskjet-f2400 now printing HP-Deskjet-f2400-0. enabled since Mon May 31 15:45:04 2010 Connecting to printer... and it just sits there. Nothing is in error with the printer itself though.
I have enabled 2 screenshots.
i m trying to get online using prolink phs 100 modem i have been reading forums and tried to configure my system but i cant install USB_MODESWITCH coz its a bz2 file.... i tried downloading .rpm file and tried to convert using alien..i was prompted i didnt had alien..
i downloaded alein .deb file and tried to install i was propmted dependency not satisfied... debhelper(>=3) i downloaded debhelper . deb file and tried installing i was again prompted dependency not satisfied... dpkg-dev(>=1.14.19) i need to get connect ubuntu...
i'm connected to my 2wire 2701hg-b, but have no internet. when i plug in directly there's no prob, but wireless is a no-go.
View 1 Replies View RelatedI installed OpenVPN, placed conf, keys and certs into /etc/openvpn/. I did
Code:
sudo openvpn --conf /etc/openvpn/client.conf
And everything seemed alright, but when I actually try accessing something that I need VPN for, it doesn't work (it's the same as if I wasn't in VPN). I also tried using GOpenVPN but the results are exactly the same. I know the confs are ok as I use the exact same files on Windows 7 and everything's fine. I even disabled ufw, restated machine etc, just to be sure.
I am running Ubuntu 10.04 along with windows7.In Ubuntu, wired network worksWhen I connect to a wireless network, it connects but I am not able to connect to internet.It says, 'Wireless network connection 'blabla' active'
View 5 Replies View RelatedThis is my second day with ubuntu on a dell mini 10v with broadcom wireless card. I hooked up to a wired connection and ubuntu installed the drivers for the broadcom card.When I put the cursor over the wireless icon on the desktop it shows the name of my wireless connection,active,and my ip address but when I open firefox I get a "server not found". I'm confused as what to put in the boxes for ssid,mode,bssid,mac address,and mtu under network connections. I've tried pretty much every conceivable method at my disposal,even went on my d-link router settings and nothing has worked.I do not have windows installed,using 10.4
View 1 Replies View Related