Ubuntu :: Monitor That Switches Off During Xubuntu 10.04 Install ?
Jun 21, 2010
Basically I have some Linux experience and have got myself an "old-but-good-machine".
I'm sure the Xubuntu 10.04 cd is OK as I can boot into it with my Windows laptop.
But... for whatever reason I can't boot it under the Live CD or Install options in my old computer?
As soon as I hit one of the options the monitor switches off after a few seconds?
I've tested the computer with a live backtrack cd and gparted live cd which both run fine so it must be something I'm missing in Xubuntu.
View 9 Replies
ADVERTISEMENT
Aug 19, 2010
I'm running ubuntu 10.04 on a new pc I just bought. Every so often the monitor will just shut down and display a message: "no signal input". I'm sure the computer is still running though because the fan is still running and all lights etc. are still on. I've tried switching the monitor on and off and there is still no input signal, the only solution is to reboot the entire computer.
View 9 Replies
View Related
Jan 16, 2011
1. I can run the graphical installer at full resolution without using "nomodeset"
2. I can boot into the Gnome desktop using the option "Try without installing" without any problems
3. When I install to my HDD however, I can boot but just at the point where the logon screen should come(after the black screen,blinking cursor), the display reports no signal and goes to sleep. I can hit enter, type my password, hit enter again (blind, as there's no display) and the HDD spins up as if logging in, but I don't see anything.
4. Using "nomodeset" makes no difference whatsoever other than the graphical installer runs at a lower res.
5. using the alternate installer changes nothing
6. recovery mode has the same issues
It appears to me that booting into Gnome without installing uses some sort of generic driver, whereas installing uses a different driver which is sending my display to sleep. I'm using Ubuntu 10.10 64Bit. Have also tried using 10.04 64Bit and the alternate 10.10 .iso, but to no avail. My graphics card is an NVidia Quadro NVS 295 with a DisplayPort-DVI adapter. I've previously installed 10.04 64Bit on another system with an NVidia GT240 card with no problems whatsoever. I can't try that card in this machine as it's too big for the case chassis, let alone the case.
View 3 Replies
View Related
Apr 3, 2011
I use XDMCP from an old laptop to login remotely to another computer which is running Debian 6. This seemed to work fine in Debian Lenny, and the laptop screen would switch off after a period of inactivity as I expected. Now the laptop screen blanks after inactivity, but the backlight never switches off.
View 1 Replies
View Related
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
View Related
Jan 12, 2010
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
View 5 Replies
View Related
Mar 5, 2010
I have the following system using an ATI graphics card, SATA Drives and want to install Fedora 12 as a dual boot option with Windows XP.
Using an install DVD it seems that Fedora installs then at a point during the copying of packages the screen goes blank actually switches off. The DVD Drive and Hard drive still work , my guess is completeing the install. On reboot I do not get the option to boot to linux.
I have 2 SATA 3Gbs Hard Drives formatted for windows NTfs. One has 2 partitions and some free space, the other is formatted NTFS and is my data disk.
I would like to be able to access the data disk with both Windows and Linux and install Linux system in the free space.
Having read a few of the guides available, none of them seem to mention this problem, although I am aware of the Ati support problem. I am hoping I do not have to replace my graphics card with a nVidia one.
View 2 Replies
View Related
Nov 17, 2010
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies
View Related
Aug 27, 2010
I have the Xubuntu OS, can I install a different kind of Linux OS within the Xubuntu OS?
View 4 Replies
View Related
Jan 2, 2010
I've been getting it up and running with Xubuntu. Xubuntu 9.10 just won't install--the screen goes blank and the computer locks up, with either the regular or the alternate install CD. I gather that this isn't an unknown issue in 9.10, so I'm installing 9.04 instead and I'll just wait until 10.04 comes out. Xubuntu 9.04 installs and runs like a charm.This is an HP Pavilion ze4125, with 768MB of RAM and an ATI Radeon IGP 320M video card. When I enter "sudo su -c "lspci | grep VGA", it returns "01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1".
So what I want to do now is install the best driver I can so I can make the most of the video card. XP let me use any number of high resolutions, but the Display icon in Xubuntu tops out at 1024x768. EnvyNG doesn't offer. anything compatible with my video card. I've tried installing ati-driver-installer-9-3-x86.x86_64 and ati-driver-installer-9-12-x86.x86_64, but both say "Extraction failed" (I was running them with gdm stopped).So, is there something specific I should be doing to get access to higher resolutions, or a driver I need to install? This is easy on my main computer, which has an NVidia card, so I can use the NVIDIA X Server Settings utility to adjust the resolution--but obviously this machine doesn't have an NVidia card.
View 4 Replies
View Related
May 18, 2011
I am running an Acer Aspire 3680 and My HDD crashed so I want to run off of USB Drive.
View 3 Replies
View Related
Jun 5, 2011
My Specs;
Desktop PC, Tiger Direct, Firefly BCD.
Mother board; PC Chips M758LT - ID 9039E90F31D926C3.
Intel Celeron 1.3 GHz x86 Family 6 Model 11 Stepping 1.
Bios; American Megatrends Inc., 062710, 7/15/1997
SMBIOS Ver. 2.3
Memory; 512 MB
Master HD 20MB half full with 40MB Slave HD. WinXP service pack 3 and all updates are current, with one glitch, system will not 'restart' have to press off button, then have to press off button twice again to start XP running again. Tried to run off CD using xubuntu, Lubuntu 11.04 and Unbuntu 11.04. A page of errors covers the screen, I have a photo attached which I hope you can download and zoom in on.
It starts out with, 570.240718 Kernal panic - not syncing: Attempted to kill init! 570.24786 Pid:1, comm:init not tainted 2.6.38-8-generic #42-Ubuntu.... Regards, Michael A I'm going to mark this as solved. I have to add a 40mb hard drive and make it master and make 20mb hd the slave and add 2 - 256 ram instead of 128 memory. I have an issue where xp will not reboot so i intend to format both hd's and try to install 10.04.2 from cd for a full install, no windows. I will report back.
View 4 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
Feb 20, 2010
The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
View 2 Replies
View Related
Jun 28, 2010
I am trying to upgrade to Xubuntu 10.04 from a Slakware install. I downloaded the ISO image, burned that to a CD, and then created a floppy with SBM.bin image. The system is an old i386 which has a BIOS that will not boot from CD. I can mount and read the CD under the currently installed Slackware system with no problem. When I boot from the floppy I get a menu that shows the hard drive and the floppy as boot options, but not the CD. The CD drive is an ide on the same controller as the hard drive with the hard drive being master and the CD drive being slave.
View 2 Replies
View Related
Aug 19, 2010
I know I can have the gnome desktop on my server by typing:
sudo apt-get install ubuntu-desktop
But can I install the xubuntu (XFCE) desktop instead?
View 5 Replies
View Related
Oct 14, 2010
Installing the closed source java in Xubuntu 10.10.
View 1 Replies
View Related
Mar 6, 2011
Alright yall, I just got my wireless usb device to work on ubuntu 10.10. I did alot of searching and I finally figured it out. this is what I did.
1.Download the linux drivers from this post, its called Ralink_RT3572USB_drv2400.zip
2.Extract them to a directory.
3.Make sure you have build-essential installed on your computer. you can do this by opening a terminal
and typing
Code:
sudo apt-get install build-essential
4.Now install linux headers so that you can compile the drivers.
Code:
sudo apt-get install linux-headers-$(uname -r)
5.Now in your terminal goto where you extracted the Ralink_RT3572USB_drv2400 files.
once in that directory type
[Code]...
View 9 Replies
View Related
Apr 3, 2011
I need to be able to browse the network. How can I change my xubuntu install to ubuntu?
View 1 Replies
View Related
Apr 3, 2011
I am using the universal usb installer from [URL] and i have tried putting kubuntu on my usb flash drive and when i plug it in my netbook and boot from usb it comes up kubuntu and it gives me options and i select install to harddrive and when i press enter is comes to a grey screen and nothing happens? am i supposed to type something in? after i formated my usb flash drive and tried xubuntu and the same thing happend...?
View 1 Replies
View Related
Oct 6, 2010
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
View 1 Replies
View Related
Jan 12, 2011
I'm try to install XUbuntu 10.10 (AMD64) on a Pc, when I set the language, and press Enter on "Try XUbuntu without installing", appears the Xubuntu logos and remain fixed for many hours without giving error... same problem with Ubuntu and Kubuntu.
I try to set acpi=off and noapic but i don't resolved the problem..
View 1 Replies
View Related
Jan 27, 2010
I was trying to install ns2 under xubuntu 9.10.but after validating tcl,just while starting validating tk,it stops the process of installation then & there & shows some messages like
autoconf not found,makefile not found etc. & at the last shows that visit [URL].. it is my final year project. Further,can any1 guide me in creation of "MAKE" file for
View 6 Replies
View Related
Jan 12, 2010
i installed Xubuntu desktop and decided i didn't like and uninstalled it.. but it hijacked my boot screen and login/logout screen. i restored the boot screen but i can't find out how to restore the login/logout screen.
View 9 Replies
View Related
Oct 19, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed.
View 1 Replies
View Related
Dec 24, 2010
how secure a default install of Xubuntu desktop 10.04 is when connected to the internet with a routable, public ip address. If anyone can give some recommendations on any changes/additions they would make to improve security
View 2 Replies
View Related
Jun 23, 2011
I have tried twice to use Wubi to install Xubuntu on a Windows XP machine. Each time the results were the same:
1) Downloads the required stuff.
2) Does some post-download stuff.
3) Says it needs to reboot to finish the installation.
-------------- here is where it goes bad -------------
4) Reboots back into Windows. There is nothing set to choose Xubuntu (no error messages displayed in prior steps).
Has anyone else encountered this bug?
View 3 Replies
View Related
Apr 25, 2010
Having problems installing Xubuntu 9.04 to my Dell Latitude CPi (old, I know, but available...). Problem is that the CDROM is not working right and the BIOS doesn't support boot from USB so I can't do a complete live CD install via the CDROM or USB.What I'd like to do instead is install the ISO to the HD and run the install from that HD. Even with the CDROM problems I am able to load the Live CD installer from CDROM.
With that I think the best option will be to extract the ISO files to the HD (attach to another computer and extract to a FAT32 partition, then replace HD back in the latitude) then direct the liveCD bootloader to find the install files on the HD. Unfortunately I don't know the necessary commands to pass to the bootloader.
View 5 Replies
View Related
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
Dec 6, 2010
I remembered the last time I use wubi, I can install Xubuntu from local ISO image.
and today, when trying to install Xubuntu, wubi trying to download Xubuntu ISO. there is no option to choose local ISO image.
I've tried to put Xubuntu ISO in the same folder as wubi installer, and close internet connection... both not works...
I use unstable wireless internet. It rather impossible to download until finish big size Xubuntu ISO from internet
View 1 Replies
View Related
