I am running Ubuntu 9.10 KK (UNR) on my Netbook and I use the Huawei E5830 as UMTS modem. I can connect to the E5830 through WiFo (no problem at all) and USB. How can I verify whether the E5830 is recognized as modem when connecting it to USB? It changes the mode from USB storage device to USB modem, however I think I can not access it as a modem.
View 9 RepliesI have installed the KDE spin and am liking it so far. Except for the fact that I cannot get onto the internet. I rely on this ZTE USB wireless modem for internet and that just would not get recognized in Fedora. Plus, my Windows installation is down and I would love to keep it that way if at all possible.
I have followed a few instructions on this particular problem. I have modified the menu.lst file to account for the usbmodserial and product. The usb_modeswitch program has also been installed and the usb_modeswitch.conf file has been edited with the values I got from the 'lsusb' command's output.
But the curious thing is that when I actually execute the usb_modeswitch command, I get a message saying that there are no drivers for the ZTE device. Which means that I cannot go onto the wvdialconf part of it at all. Basically at this point I dont have a modem, according to Fedora. But it does get recognized as a ZTE device. That tells me that there is something right about what I have done so far and may only need to do a few tweaks here and there.
PS - I am based out of India and this is a Tata Indicom Photon (NOT Photon Plus) connection for which I have a USB device which acts as a modem.
I am trying to get a Vodafone USB modem to work - Huawei K3765 (which is a rebranded E169). It's supposed to be recognized by the kernel and just added through Network Manager, but - no luck. I also installed vodafone-mobile connect from here: [URL] (as well as the other packages). What happens when I start it - it doesn't see the modem. It's seen as a CD drive, and clicking "eject", "unmount" or "remove safely" on it doesn't help - it disappears, then several seconds later appears as a CD drive again.
View 14 Replies View RelatedI have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedI just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run
Code:
ifconfig eth0
the result is
Code:
no such device
The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.
i have some basic knowledge about device drivers.can any one tell how to write drivers for virtual modem, Actually my project is to implement communication between the two PCs by using two virtual modems. so for that i need to write the code for the virtual modem which it should understand all the AT commands exactly as physical modem and it should send/receive call and SMS.
View 1 Replies View RelatedI have a USB Tata Docomo (USB Modem to connect internet) lsusb shows
Code:
Did a lot of Googling etc on forums and seems a few people have been able to use it.
1) [url]
2) [url]
Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.
I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)
Quote:
Shows
Quote:
Quote:
My kernel is
Quote:
Quote:
Like this it keeps on repeating above steps. My service provider does not give a user name and password.
Here is my wvdial.conf file
Quote:
Next set of commands
Quote:
Quote:
Quote:
Quote:
Quote:
I also tried as per this post [url]
Quote:
How do I connect to internet?
Is the driver for my device missing on my system?
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
I own a Tata Photon plus usb modem which is a Hauwai EC 1260 and am not able to configure it on my ubuntu installation.
I have used it perfectly on my Mandriva/openSUSE installation so there should not be any question about its not supporting linux.
the menthod I used to connect to the internet was
lsusb :- to find the vendorID and productID.
modprobe usbserial vendor=0xAAAA product=0xBBBB with AAAA and BBBB being vendor and product ID respectively.
wvdialconf : to create the /etc/wvdial.conf file followed by subsequent editing of the file to insert username and password in it.
finally wvdial ... to dial the connection. The file /etc/resolv.conf was also edited the first time to include the nameserver values
but in case of ubuntu everything fails as soon as I fire wvdialconf command. It terminates with and error stating "modem not found".
In case of Mandriva/openSUSE wvdialconf used to check ports 7 to eight ports but in ubuntu it checks only 4 ports which perhaps arr labeled S0 to S3.
Please help me to sort this thing out.
One probable error might be due to the mounting of virtual CDROM inbuilt into the device which contains the installation files for its being configured on windows.
I am using 11.4 gnome desktop on hp elitebook 8440w. I have a reliance netconnect plus usb modem. (ZTE AC 2726).
Initially it was recognized but didn't work. But now system is not recognizing it. What should i do. Please suggest.
I have installed openSuse 11.3, my computer is a Dell Vostro 1500, it has a modem, but is not recognized between the devices. I do not know why. I have not the slightest.Please, someone with enough intelligence to be humble to explain clearly and explicitly that the system can I identify and mount my modem, and can make use of it.If by chance you need some additional information, please specify to me how I can get to the place in this thread.
View 4 Replies View Relatedon my server (fax server)with Cento O.S 5.2 final kernel 2.6.18-92.el5 the external serial modem 56k us robotic is not recognized.Kudzu not notes the modem.PS .On the same server ,same modem ,same serial but with Centos 4.5 ,this as regular detect.
View 9 Replies View Relatedfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
After solving the problems:
- HDMI device not recognized in aplay -l
- upgrading Alsa to 1.0.23
- multiple HDMI devices installed
I now have an ubuntu laptop where
1) aplay -l outputs
[Code]...
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have a 2016 Lenovo (ideapad) 500-15ACZ laptop, and just replaced Windows 10 with Debian 8.3. I can't get Debian 8.3 to recognize the wireless device. The device isn't defective, for it works on Windows 10. The Windows 10 driver is called "WLAN Driver (Atheros, Realtek, Broadcom) 12.0.0.116_ 7.35.295.2_2023.1". Here's the output of "lspci":
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 9874 (rev c5)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
[code]....
I have an external hard disk drive and I would like it to be recognized with the same name (e.g. /dev/sbd) after each boot.
Is there any way to make that?
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
I have Ubuntu 9.04 in my desktop, I am trying to configure Photon+ wireless device in my desktop, since it is having .exe file i am finding difficulty to configure it( I know .exe will not work) , but i want to know is there any possibility to configure this modem in Ubuntu machine....
View 1 Replies View RelatedI have enabled IP Forwarding in my linux machine by using the commandsysctl -w net.ipv4.ip_forward=1. But I dont see any difference in routes when I type the route command before and after changing this value.Do you guys have any solution to verify the packet forwarding, but using this single linux machine only? Of course, I verified the net.ipv4.ip_forward=1 value. But I need to verify by transmitting orreceiving packets
View 3 Replies View RelatedWe ran out of space on our server hard drive, so I installed 2 x 1GB drives, set them up as a software RAID1 array, copied the contents of /home to it, mounted it as /home for testing. Everything OK, so I unmounted it, deleted the contents of the /home folders (don't worry, we're backed up), then remounted the array. Everything was fine until we rebooted. Now I can't access the array at all; during booting the error "mount: special device /dev/md1 does not exist" comes up twice, and manually trying toe same issue. The relevant line from fstab reads:
/dev/md1 /home ext3 defaults 0 0
However, using webmin shows only md0, the RAID0 device on which the OSD was originally installed. There is no /dev/md1 device file. The mdadm.conf file reads as follows:
# mdadm.conf written out by anaconda
DEVICE partitions
MAILADDR root
ARRAY /dev/md0 level=raid0 num-devices=2 uuid=76fd4050:fb820568:c9bd3a59:ad3e70b0
So it's not listed; I'm assuming this is significant. Am I right, and whether I am or not, what can I do?
I am beginner in UBUNTO 10.04 LTS. I have a mobile broadband of Relience which use the device of Huawei EC 1262. I have a problem with this modem. when i installed required packages for this device like usbswitch, wvdial etc, my internet connect works fine but as i switch off the PC and restart, PC can not detect the modem, it detect as mass storage device. Is there any command/option that i switch the mass storage device into modem in the terminal window or on the GUI platform mean on the desktop screen.
View 2 Replies View RelatedI recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
View 1 Replies View RelatedI finally decided to transition to a 64-bit install (AMD64). (same machine, just reinstalling as a 64-bit kernel starting w/ a Debian squeeze netinstall image) My audio chipset is nvidia MCP61, and it was working perfectly under a 32-bit kernel (I did the transition because a poorly-written system backup script (my fault) hosed /usr, /bin, and /sbin) When everything was up and running:
*: KDE4 only recognized the output device as ALC1200 Analog
*: kmix only had a single channel(master)
*: alsamixergui did recognize all the channels
*: some games (sauerbraten, for example) had no sound in KDE4.
*: some games (warzone2100, for example) did have sound in KDE4.
*: the games that had no sound in KDE4 did have sound in fluxbox.
I removed the following packages (some of which I had installed to try to get audio working properly):
[Code]....
The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive.When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message.
[19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21
[19712.145347] usb 2-2: configuration #1 chosen from 1 choice
[19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices
[code]....
I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external hard disk.
connecting a 3G USB dongle device, that works with a SIM card, perhaps via wicd as the network manager. I have it working under Windows 7 and the following are some of its details:
Code:
Device Name : ZTE Proprietary USB Modem
DeviceType : Modem
Authentication : CHAP
[code]....
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View Related