I'm seeking for a site to manually download the source of the kernel 2.6.31-14-generic for Ubuntu 9.10. I did search through the addresses listed in my /etc/apt/sources.list file but that was of no help. So could somebody please give me a precise address to download from?
View 4 RepliesI haven't used Linux very much, so I'm not sure how to do this. I'm presently running the 2.6.24-26 version of the Linux kernel on Ubuntu. However, I need to upgrade to 2.6.32. I have the source files (arch, block, firmware, drivers, kernel, include, etc), but I have no idea how to change the source of the kernel, or if there's an easier/automatic way to do this, and I specifically need the 2.6.32 version.
View 2 Replies View Relatedyesterday i downloaded source of my virtual linux kernel and tried to compile it. It compiled indeed but could not boot from the new kernel. Then today i decided to re-downloading after removing the folder where source files are located but it said "linux source is already the newest version"
I use the command below: sudo apt-get install linux-source What should i do to be able to re-download the source.
I installed Ubuntu 9.04 on a Dell Latitude E6410 I have neither Ethernet connection or WIFI connection.
If I could figure out how to download the kernel source for ubuntu 9.04 then I can build the devices into the kernel and get them working.
Where can I find the source for Ubuntu 9.04, kernel 2.6.28-11-generic.
Also, there are names for the Ubuntu. How to figure out the name of my OS?
Note, I tried to install Ubuntu 10 but the screen was blank after I booted off the installation CD.
[root@sharpblade ~]# yum repolist enabled
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 13 - x86_64 20,840
fedora-source Fedora 13 - Source 0
updates Fedora 13 - x86_64 - Updates 2,736
repolist: 23,576
why status of fedora-source is 0, dose this means there's no available packages in this repo? kernel-headers and kernel-devel have been installed, how can i install the kernel-source package?
I am an extremely new Ubuntu Server user. I am trying to install NFS on a new Ubuntu Server 10.10 installation. When running the command sudo apt-get install nfs-kernel-server nfs-common portmap, I was previously getting the message:
E: unable to locate package nfs-kernel-server
I'm sure I don't have the correct sources for installation, I just don't know source I need to add.
I have done a new install of Fedora 14 but the RTL8191 wirless card is not being recognised. Realtek have provided the driver source but the make operation is failing because (I think) Fedora 14 isn't provided with the kernel source to enable it to complete successfully.
Basically (in easy to understand steps): how do I download correctly the Kernel source to enable the driver make operation to proceed?
installed the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies View Relatedi am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies View Relatedi am working off of this link https://help.ubuntu.com/community/EOLUpgrades/Feisty and when i try to follow the instructions below "download tarball manually" i get this. chown: cannot access '/tmp/tmpaIgInN' : No such file or directory
View 9 Replies View RelatedIm getting Bug # 659438.
And When I try to fix it by putting this in the terminal:
Code:
I get this:
Code:
That means I have to Fix: libula50 package manually.
More Info on this bug: [url]
I need to download the following library: rpmlib(PayloadIsLzma) <= 4.4.2-1It seems it's on this site, but the site is having issues or something: [URL]This machine is not connected to the internet nor can it be.I installed the libg2c.so.0 library [URL]and now am having to insatll its dependencies
View 1 Replies View RelatedI need to download the following library: rpmlib(PayloadIsLzma) <= 4.4.2-1
It seems it's on this site, but the site is having issues or something: [url]
This machine is not connected to the internet nor can it be.
I installed the libg2c.so.0 library [url] and now am having to insatll its dependencies.
To see links, copy and paste in browser and remove spaces. I don't have 15 posts yet to post links!
I've been playing around with various distributions including Arch Linux, openSuse, and Ubuntu with it's derivatives. So far, I feel that Ubuntu flows the best out of them all, offering the best mix of user-friendliness, eye-candy, and performance. HOWEVER, I really like doing things from the ground up and like having complete control over what I am using/spending resources on. OpenSuse was very attractive to me because of it's [URL]... which allows you to start with a basic system and add, manually, each and every package you want so you get exactly what you want. Does Ubuntu offer any system like this? Or, alternately, is there a "barebone" download in which you get basically a command line with networking and can apt-get all of the packages you want?
View 9 Replies View RelatedI have jdk.rpm.bin package. When I run the command ./jdk.rpm.bin it extracts and automatically installs the package. I want to extract rpm package only and to install rpm myself not automatically.
View 2 Replies View RelatedWhen I install something manually it won't show up in synaptic package manager, so how do I fix this?
View 3 Replies View RelatedSometimes i have on some magazines or Internet Zip packages that are the answer of what i am looking for.
Wich tool and how can i do it? c Well, i am in position to say that i had downloaded from Internet or located the package in the Cd or DVD that comes with the magazine.
But now comes the big question. How can i put this package ( install) on my distro ???
Do i have to be a normal user or should it be root or su (superuser) ?
The packages that come with the distro is easy, because i select them and everything is done
As i told before, maybe this is a silly question, but i simple don't know how to install them and i need some of them to leave MS for good.
It sounds like he's making a difference between the kernel "source code" and the kernel itself(as in the downloaded file/ files) but the way he talks about both is the same.So then, if one had already "installed" the "kernel sources code," why would he need the "tarball with the newest Linux kernel?" He's already "installed" a kernel, right?
View 3 Replies View RelatedMy machine starts and the grub rescue> flashes .... i tried to manually load into my ubunutu 10.4 kernel-2.6.32-24my commands were
grub rescue>
set prefix=(hdx,y)/boot/grub
insmod linux
[code]....
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
Is there an easier way (without using a package manager) to upgrade programs? For example, I just want to upgrade Amarok. In order to do this, I've had to upgrade every one of it's dependencies because they've all had minor upgrades from the versions I already have installed.
Is there an easier way to compile programs and their dependencies manually or are package managers the only way?
I am running an Hp Pavillion dv6000 with the Broadcom card that never seems to work for Linux. I recently talked with my friend who said he found a way to get it work.following his instructions I opened Synaptic and checked the package bmcwl-kernel-source to be installed.I went through the process of it all and it said it had install successfully. I restarted the computer and when I tried to enter my operating system I got this error "Kernel panic - not syncing : VFS : Unable to mount root fs on unknown - block(8,1)"
I have previous versions of Linux on my computer so I can still get in to those if need be but I don't know how to undo what I did or why it isn't working for that matter. Does anyone have any ideas as to why I am getting this error and how I can fix it?
I've been trying to install nvidia drivers yesterday, so I went to runlevel 3, ran the .bin installer and it came up with error: missing kernel-devel and kernel-source.
So I go yum install kernel-devel, it does, but it doesnt find anything like kernel-source.
How do I fix this issue? I have Fedora 12, and I ran drivers from:[URL]..
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
Desperation has set in and hence you get to view a thread with this title. I think the title explains it all. Or, what can be done when packages are no longer available through the repository but installing them from RMP is boarder line crazy.
View 8 Replies View RelatedI'm running CentOS 5.3 and would like to know what the "best" or "proper" method is to build a custom kernel using the generic kernel sources from kernel.org. Most of the references I've found talk about modifying the current CentOS kernel using the RPM way. I really want to have the latest kernel due to some important security issues that haven't been addressed in the current CentOS 5.3 kernel.
View 6 Replies View RelatedI'm currently on 2.6.32-27 in Ubuntu 10.04, thinking about 'manually' installing a newer/up to date kernel.
View 7 Replies View RelatedI'd like to upgrade the kernel in the ISO of a Ubuntu 9.10-based CD with proprietary applications, burn a new CD with this modified ISO, boot up with it, upgrade + add + remove modules and applications, and finally save the running system into a new ISO file which would now have the latest and greatest.
I have a couple of questions: 1. How can I download the kernel manually? Where can I find the latest vmlinuz + initrd files for Ubuntu 9.10?
2. Is it just a matter of replacing those two files, or are there other dependencies I should update in the rest of the ISO, eg. isolinuxisolinux.cfg: Change initrd.gz to initrd.lz, etc.?
For some reason, my kernel got uninstalled. I have only file called "initrd.img-2.6.26-1-xen-amd64.bak" in my /boot folder. The only other thing is a 'grub' folder. I booted into a rescue OS, but is there a way to install a kernel manually so that I can boot into my original OS again? Can I just download a vmlinuz file into that folder and then fix my menu.lst?
View 1 Replies View RelatedI want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
View 1 Replies View Related