I just installed Debian jessie on my Dell Latitude E6410 using the UEFI install. No everything went well during the install, but after the install the first boot i ran into an issue that the laptop will not boot.
When I go in to the boot menu of the Dell Latitude E6410, I see that debian has created a uefi name (Debian)
When I select this, it boots without any issues. After again a reboot again, no luck still a black screen during the boot.
Seems that the only option to get my laptop booting is by pressing F12 and select Debian in the UEFI boot of the laptop.
Is there any way i can get my laptop to boot Debian directly from UEFI, without having to press F12?? (Also disabled all legacy devices to start up but no luck)...
- Debian Jessie X64 (Using 32/64 network install, via USB) - Dell Latitude E6410 i5 (1280x800 intel graphics) latest bios A16 - SSD drive (Samsung 470 series) - Debian is the only OS installed
I'm trying to install OpenSuse 11.2 64bit on a new Dell Latitude E6410 notebook. This is the Intel i7 processor with 8 Gb of RAM and Nvidia NVS 3100M graphics. I can boot from my 64bit installer DVD, but once I choose either Live version, to test it out, or just go for Install, after the first selection screen where I can change the default video at the bottom, I just get a black screen, no video.
I can't find any info on installing Suse on this notebook, (I think its only be available for a couple of weeks now). What do I do to get the screen to show me the graphical installer, Or how do I make the KDE Live version run from the 64bit DVD. I also tried the 32bit version DVD, but it wouldn't give graphics either, so it seems like an X issue.
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
I am trying to put FC12 on a new Dell E6410 (laptop) with video "00:02.0 VGA compatible controller: Intel Corporation Device 0046 (rev 02)". I used the Live disk and successfully installed, but then I updated. Thereafter when I boot I get a black screen. I cannot even get to the login.
Unfortunately I really do not know where to start to try to trouble shoot. (I can get into run level 3 on the latest kernel). Also the issue seems to come about from kernel 2.6.31.5 to kernel 2.6.32.12 since the blank screen issue does not arise in the former. For now I switched the order of these kernel in GRUB so the older one boots first and this seems to work.
Although the blank screen is my most pressing issue, I am having others too (synaptic mouse, wifi, suspend, internal camera). Well, hopefully once I can run the newest kernel these issue will disappear.
this is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
The disc is fine I have installed using the CD on an Acer Laptop without any trouble what so ever. However now I need to install it on a Dell Latitude D505.It was detected and started the disc and show Ubuntu with the five dots loading screen. And then it goes black, with the laptop on. The menu with options like Install, defect test etc. can't be seen.In response to this I installed it inside Windows and that seemed to be ok, so I restarted the laptop and selected Ubuntu from the boot menu and does the dot loading screen and then black.I have searched Google and it is just threads that end up dead.
I'm trying to install the magnificent ubuntu 10.10 on my brand new Dell LATITUDE E5510. The installation works fine. I installed it with a working internet connexion ... so the drivers should be there. Then when booting, the GUI does not start I get the console instead...
I tried several things: - run startx --> I get a blank screen where even CTRL+ALT+F1 does not work anymore
Code: sudo dpkg-reconfigure -phigh xserver-xorg --> just returns without anything on the screen, no error no nothing
- run in failsafeX mode, I get: Ubuntu is running in low graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure them yourself.
Then I get the login page but it doesn't go any further, when I type my login/password it comes back to the login page...
When I do: Code: lspci | grep VGA I get : VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev02)
That's all I could see... apart from that I'm not getting any error messages and I'm really stuck.. I'm running on intel Celeron 32 bit, I have checked the checksum of my CD...
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
Just did a fresh install of F12 on the D600, and a couple of problems. The network was working during the install, but after does not see ethernet nor wireless.
The only straying I did from a default install was to manually create partitions, making one for swap and the rest is / on ext4. Seemed fine installing and booting.
Also the touchpad and mouse settings are messed up, buttons reversed, click events from the touchpad showing "clickdown" but not acting as if the click was released.
ONE BIG COMPLAINT: I see selinux doesn't come with an easy way to disable. How is it disabled with F12?
For now I'm in a hurry, so I'm going back to F11 - past OS installing and booting ok include Ubuntu 8.04, 9.10, F5, F7, F9, F10 and XP to name a few.
My Dell Latitude D820 had lenny installed and working fine. I did not have anything exotic installed (other than perhaps nividia drivers). I went about upgrading to squeeze following the notes/documentation on the debian web site. During this process it mentioned that the following firmware was not going to be installed (as it is not freeware; BTW I had non-free in my sources.list):
On reboot it was clear that the new kernel was not in a healthy state. Even when booting with older kernels I had serious stability issues. After about half a dozen reboots trying to resolve problems I was experiencing the laptop would not even load the Dell splash screen on power up. I could not even navigate into the BIOS. Nothing appeared on the monitor (or external monitor).
I put an ISO disk in the DVD drive to see if it would boot from the DVD; it seems to load but absolutely nothing appeared on the screen. I tried navigating the grub menu (not displayed) and load my windows partition. When it booted to the point where windows would normally display the GUI it flashed several times and displayed a 'BSOD' with the following message:
*** Hardware Malfunction. Call your hardware vendor for support NMI: Parity Check / Memory Parity Error *** The system has halted ***
It looks like my laptop is now FUBAR. It is out of warranty so any fix is likely to be DIY. Any ideas on how to resolve this?
I'm trying to start using Debian Squeeze 64b on my laptop, which is Dell Latitude D830 with Intel i965GM.
After Debian installation, when system should display some nice background and window which please me to log in, I see my screen gets blank, fuzzy, blank again, ...and after several times finaly all hangs. Surprisingly mouse pointer is displayed nicely and works. I can't use network on Debian becouse of windows authorization program which i can run in wine on KDE. This works on Kubuntu.
What I did already:
I installed KUBUNTU 10.04 LTS and it's doing job well.
I installed Debian Squeeze with options:
- enabled:base system, laptop
- disabled:graphical environment
After instalation I logged in on root account and did:
@2: Googling everywhere i found several installation guides pointing to instal pure KDE by installing kde-core package, but it seems Squeeze does not have it.
@3: Unfortunately this command did not install nor update anything.
All I want to do is to install pure Debian with xorg and kde core (not full kde package) for later customization.
I tried to:
- generate xorg.conf (X -configure) and place it at /etc/X11/
- use xorg.conf working for other people in web.
- dpkg-reconfigure xserver-xorg
- googling & forum search for my specific problem and for errors found in syslog; with no working solution.
I just got a new laptop, and installed fedora 13 on it. I have had no major problems, until i tried to hook up a external monitor. It does not show up in the gnome-display application, and the keyboard switching button combination (Fn+f#) does not work. On my past laptop, this worked fresh from the install, f8->f10->f11.
System:
Dell Latitude E6410 nVidia Corporation GT218 [NVS 3100M] (rev a2)
I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine).
Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?
I have my brand new Dell latitude e6410 delivered with Windows 7 already installed. I want a dual boot and I decided to try SUSE for the first time. I used the installation DVD, the installation seemed to end up well. The problem is that already at the first reboot, the screen went completely black. By pressing ctrl-alt-del I can reboot the laptop. It seems to me a problem with the graphic card.
My setup is: Dell Latitude e6410 Intel i5 m560 @2.67 GHz nVidia NVS 3100M 4Gb DDR ram Intel 82577LM Gigabit Network connector
If I start in failsafe mode, the X server starts, I have KDE, although with a somewhat sketchy graphic, I can use SUSE almost normally. The main problem in this case being that the system doesn't find any ethernet/wi-fi device, so I cannot connect to the Internet (I'm writing from Win7 right now). I tried choosing the default SUSE boot with the additional boot option "nomodeset" at the grub prompt. This is a suggestion mentioned in another post on this forum, although in that case the problem was coming from a bug dealing with an Intel graphic card. The system goes up but then kde doesn't start. I'm asked to lgin at a prompt. If I try to launch kde from command line (startkde), it complains that the variable $DISPLAY is not setup.
This is where I am now. I'm quite out of ideas, so I want to ask you few things. First stupid question: is the problem coming likely from the drivers of the nvidia graphic card? Second question: in that case, how can I fix it, considering that the linux partition is "isolated"? The fact that in failsafe SUSE doesn't see any network adapter concerns me a bit.
Ive been trying everything possible, and cant get this Intel card to connect. Here are the details Centos 5.5 Kernel 2.6.18-194.el5 Intel 82577LM Gigabit on dell laptop e6410 Broadband router with gateway 10.54.7.1 My network is 10.54.7.* linux sees the exact card in the configuration utility. If I choose dhcp, and try to bring up teh device, I get "no network, cable unplugged?" error If I configure static ip for eth0 like
10.54.7.2 255.255.0.0 gw 10.54.7.1
The interface will come up (seen in ifconfig) but cant ping the gateway. At one point it did work... I just cant get it back - Ive reinstalled like 4 times... in hopes Id catch something different, no luck. My network serices about 10 pcs many of them centos linux - no problem using static or dhcp with my router- I just got this new laptop and cant get ths card to work.
I'm seeking for a site to manually download the source of the kernel 2.6.31-14-generic for Ubuntu 9.10. I did search through the addresses listed in my /etc/apt/sources.list file but that was of no help. So could somebody please give me a precise address to download from?
I am trying to install 10.10 on my dell latitude e5400. Everything goes fine until I get to the "Who Are You" screen. I put in my name, name my computer, come up with a password. I do everything right (all green checks). Down at the bottom is says "copying files" and eventually gets to "ready when you are." However, the "forward" button is still grayed out, I can only click on the "back" button. I can't move forward. I've tried installing via usb drive and cd and have the same issue with both. It just hangs up at that point. Any ideas? Please be gentle...I am a new linux/ubuntu user.
yesterday i downloaded source of my virtual linux kernel and tried to compile it. It compiled indeed but could not boot from the new kernel. Then today i decided to re-downloading after removing the folder where source files are located but it said "linux source is already the newest version"
I use the command below: sudo apt-get install linux-source What should i do to be able to re-download the source.
I resued a Dell Latitude CPi D300XT that was getting tossed and have XP on it running a little slow but decent for basic web surfing. I saw a ..... video of someone that had Ubuntu Minimal with LXDE running on it. I could not find that but tryed Puppy Linux, Damn Small Linux, and Ubuntu 9 to 11.04 CD's in it and could not get them to to boot into the CD. I even just set the Dell to only boot from CD/DVD and would not boot any of them.
Does anyone know which Ubuntu or Linux distro I could try on a Dell Latitude CPi D300XT? The specs are Intel Pentium II 300 MHz, 256MB of RAM and 20 Gig Hard Drive.
I'd really like to start using Linux, but I don't know much about it. I tried installing Mandriva One 2010, but it apparently isn't compatible with my laptop. Does anybody know what would be a good distribution to use with an old Dell Latitude CPx? I'd like to get a free bootable CD one for starters, if possible. I mainly would like to use it for surfing the Web.
New to GNU/Linux community. Have Dell Latitude C800 I picked up for $5.00 @ garage sale. Windows XP currently installed works fine, but looking for optimal Linux OS for this unit. Tried installing SUSE 11.2, Gentoo, Freespire, Debian, Vector, Knoppix & Ubuntu w/o satisfactory results. Any suggestions from you good folks w/experience? I understand Slackware might do the trick, but remember I'm a newbie. :-)
After someone messed up the computer by putting XP half ass on it, it was built for windows 98 se. Now that i am working with an unformated hard drive. It doesn't like Ubuntu, Kubuntu, Windows NT, so I need to start somewhere and I need the answer fast, so i need to know what is the best linux distro for it. it is a Dell Latitide CPT c.
we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine.since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x.But, we do not manage to enable the touchscreen, neither the vga graphic drivers.
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
I've installed Ubuntu 10.10 Netbook to my sisters laptop (Dell Latitude C640) but there appears to be a problem with the screen going black then opening the primary window, then loading the sidebar and then going black again.
For example, I'll hover over the new bar on the left and it'll just disappear, the screen will go black then will suddenly come to life again and then disappear, go black and so on. It just cycles through that.
I just installed 11.04 on my Dell Latitude D620, and I'm not able to get an Ethernet connection. (Which in turn means I can't get wireless drivers.) Whenever I plug in an ethernet cable to the port and select auto eth0, the networking icon on Ubuntu's status bar flickers between the obtaining wifi animation and a spinning cursor. In a couple minutes I get the "wired network - disconnected" message.
Am pposting in here cause its my understanding gos is a part of the ubuntu family sorry if i am wrong. Anyway i have a dell latitiude d610 which am wanting to run Gos on currently i dual booting but keep finding myself going back to windows as I cant get my wireless working in gos any ideas please anyone
