ubuntu@ubuntu:~$ sudo aptitude safe-upgrade
The following partially installed packages will be configured:
linux-image-2.6.35-22-generic
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[Code].....
i'm running a fresh install of 10.10 with a casper-rw partition off a usb drive.
I've burned the installation media on several different types of media, and i'm getting an error after the 3 bars load (first screen). I've tried the verify and boot option, and it's fine. I'm trying Fedora 10 on a studio xps 1340. The error messageet isCE hpet increasing min_delta_ns to xxxxx nsec twice, thenForce XPAon: 0about 15 times, thenCE hpet increasing min_delta_ns to xxxxx nsec a few more times, this pattern alternates and the xxxxx keeps increasing, starting at something like 10000 and jumping by 50000 each time it reposts.
View 14 Replies View RelatedTrying to upgrade from 10.10 to 11.04 but it keeps giving me errors... such as:
An unresolvable problem occurred while calculating the upgrade.
Please report this bug against the 'update-manager' package and include the following error message:
I've attached a gzipped copy of my dist-upgrade folder, anybody have any ideas what's going on?
I'm trying to upgrade my 9.10 desktop to 10.04, and it is failing to fetch the following two packages:
[URL]
I've made sure everything is patched current prior to the upgrade and have tried clearing out the contents of /var/cache/apt/archives/partial first as well to no avail.
I have upgraded this system 3 or 4 times from Lucid to Meerkat without any problems. After a nasty update to my Natty installation I have re-installed Lucid and am upgrading to Meerkat, then on to Natty again. However when I try to upgrade I am getting the error below.
Code:
2010-11-21 14:01:39,632 DEBUG running doUpdate() (showErrors=True)
2010-11-21 14:01:40,265 DEBUG openCache()
2010-11-21 14:01:40,265 DEBUG failed to SystemUnLock() (E:Not locked)
[code]....
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
If others are have the problem of VirtualBox failing to build the kernel modules with kernel 2.6.32 try this :-
1. Install VirtualBox and watch as the kernel modules fail to compile.
2. Change the line
Code:
KFLAGS += -DRT_ARCH_AMD64
TO
Code:
KFLAGS += -DRT_ARCH_X86_64
In the following files :-
Code:
Line 231 /opt/VirtualBox/src/vboxdrv/Makefile
Line 170 /opt/VirtualBox/src/vboxnetadp/Makefile
Line 174 /opt/VirtualBox/src/vboxnetflt/Makefile
3. Run /etc/rc.d/rc.vboxdrv setup
You will now have a working VirtualBox setup. NB This is written purely from the standpoint of using the Closed source version of VB not the OSE version.
I using only Livecd CentOS 5.4 and my system crash in day about ~3-5 times , so I tired and want to know why this happen. (before I used live-cd 5.3 about 3 weeks and this problem still was. info : Linux livecd. localdomain 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 athlon i386 GNU/Linux.I load system perfect and If I just browsing then I will have crash after 5 hours latter , but if I install wine , xmms,lame,xmms-mp3,k3b-mp3,flash-plugin and after installing software I will look movies from internet , or lisining music on xmms mp3 format - my system UPTIME max will be ~30 minutes or less..And I want to ask, or in Live-cd I can start Firewall ? Becouse I think it's not started and then I try to ENABLE its looks like not responding.
View 1 Replies View RelatedI upgraded to 10.04 and cannot boot my system, even in recovery mode. No errors are shown, only some random color noise at the top of screen. I tried the 10.04 livecd and it doesnt boot eiter, it stops in busybox prompt with error: "Could not mount /dev/loop1 on /cow" or something like that. Before 9.10 was functioning perfectly.
My computer is Asus 1201N: [url]
I upgraded my desktop from 9.10 to 10.04 and I have no sound.
When I boot from the 10.04 livecd, sound works fine.
gnome-volume-control does not get loaded into the taskbar, when I run it from the console there is nothing listed under hardware.
I also tried creating a fresh new user account, no sound on that either but gnome-volume-control does get loaded into taskbar but still nothing under hardware.
aplay -l does list sound devices ...
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code].....
Last nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
I just upgrade from 10.3 to 11.4. Everything went fairly smoothly and most things are still working execp nfsserver
getting:
/etc/init.d/nfsserver start
Starting kernel based NFS server: mountd statd nfsdrpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)
rpc.nfsd: unable to create inet6 TCP socket: errno 97 (Address family not supported by protocol)
rpc.nfsd: unable to set any sockets for nfsd failed
dmesg:
RPC: server localhost requires stronger authentication.
[ 2545.282736] svc: failed to register nfsaclv2 RPC service (errno 13).
[ 2545.282742] nfsd: last server has exited, flushing export cache
[ 2545.282852] RPC: server localhost requires stronger authentication.
[ 2545.282955] RPC: server localhost requires stronger authentication.
[ 2545.283848] RPC: server localhost requires stronger authentication.
[ 2545.283957] RPC: server localhost requires stronger authentication.
I've done the ordinary sources.list update (lenny to squeeze) and Code: sudo apt-get update sudo apt-get install dpkg apt aptitude.sudo aptitude full-upgrade However, udev failed to install, and I used..Code: touch /etc/udev/kernel-upgrade and did full-upgrade again. Everything was going fine, I went through several package configurations and suddenly, after 30-40 minutes of "Unpacking Setting up." I just heard two system beeps and got an error similar to a kernel panic. The SYSRQs did nothing. Did a hard reboot.I got two kernels in GRUB now. + the GRUB2 chainloading option. Used this one and got Code: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block It's all the same with the 2.6.32-5-686 kernel kernel panic. Using the older kernel didn't fail on the boot up, but showed many UDEV related errors and logging in was impossible - all I get were segmentation faults. Forgot to mention it - my FS is Reiserfs
View 7 Replies View RelatedMy friend's PC recently started acting up. He had me install Sabayon on it and everything was fine until a few days ago. Every app I try to run after the PC boots results in a segmentation fault. I figured maybe something was wrong with the HDD, so I tried to boot from a DSL liveCD to run fsck, but it wouldn't boot; it freezes right away. I then tried the Sabayon LiveDVD and got a kernel panic.Does anyone have any idea what the problem could be? I am completely clueless; I've never had anything like this happen before.
View 3 Replies View RelatedYesterday, while upgrading from Ubuntu 10.04 to 11.04, the computer crashed. For this reason, when I reboot, Ubuntu doesn't recognize any longer the root folder and so on... and halts execution in a blank screen (well before the login screen).I'm currently running LiveCD and I can see the Filesystem with the root folder, the bin folder, home folder and so on....My question is How can I access the files I had in my desktop from LiveCD? I know the user and password so how can I access it?
View 4 Replies View RelatedI am using the Ubuntu 7.10 Livecd with some modifications I did, and I wanted to update the base-system to the most recent release of Ubuntu. Once I have chrooted into the custom ISO's root filesystem do I use:
Code:
apt-get update
apt-get upgrade
apt-get dist-upgrade
or
Code:
aptitude update
aptitude upgrade
or neither?
7 months using Linux , 2 months in this Forum. I'm searching for answers too long. My vga card crashes to a black screen with 178 and 183 drivers searching and executing threads for this problem does not fix nada.
Quote:
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9200M GS] (rev a1)
Problem with update 2.6.31-21 gives
Quote:
W: Failed to fetch http://ppa.launchpad.net/user/ppa/ub...86/Packages.gz 404 Not Found
My upgrade gives:
[Code]...
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code:
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR; Host address width 36
DMAR: DRHD base: 0x0000000000000000 flags: 0x1
IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53
DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe
DMAR: No ATSR found
DRHD: handling fault status reg f0002198
Kernel panic - not syncing: DMAR hardware is malfunctioning
Pid: 1, comm: swapper Tainted: G W 2.6.31.5-127.fc12.i686 #1
Call Trace:
[<c0764636>] ? printk_0x14/0x16
[<c0764580>] panic+ox3e/0xe0
[<c05b4ce3>] __dmar_enable_qi+0xbc/0xd3
[<c05b52d1>] dmar_enable_qi+0xe9/0xf3
[<c09aaecc>] init_dmars+0x1c7/0x5fb
[<c08fb6b4>] ? pci_iommu_init+0x0/0x11
[<c09ab50e>] intel_iommu_init+0x20e/0x2b6
[<c098f6bc>] pci_iommu_init+0x8/0x11
[<c0401143>] do_one_initcall+0x51/0x13f
[<c0989372>] kernel_init+0x19c/0x1ed
[<c09891d6>] ? kernel_init+0x0/0x1ed
[<c04041a7>] kernel_thread_helper+0x7/0x10
In doing my kernel-kits that allow you to create a livecd backup of your installed slackware or arch install, I came across stuff about how many x86 or x86_64 systems use a PAE kernel?
if thats so; should I release a PAE kernel kit also besides the x86 and x86_64 kernel kits for slackware/arch??
or is it not a big thing?
Can anyone run a PAE kernel or it should be a seperate build? the x86/x86_64 kits are not PAE...let me check...
I am trying to install Fedora on my computer but I am getting a kernel panic at liveCD boot after boot menu. It occurs to me for F13 and F14 (all x64, F14 x86 seems to boot fine but I'm trying to host a x64 guest OS on it so I need to get the x64 version to work)
My system specs:
Dual Opteron 265
4GB RAM
Asus K8N-DL (nVidia nForce Pro 2000, BIOS 1010)
I also tried to install F14 in some other computer (which worked flawlessly) and put the HDD into the computer in question, which gave me the same kernel panic.
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears:
ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Loading
Invalid or corrupt kernel image.
boot:
I have an i5 sandy bridge PC with a gigabyte H67M mobo. I have been running maverick amd64 till yesterday. On maverick graphic acceleration didn't work so I decided to upgrade. After upgrade my computer hangs during bootup (with ubuntu logo on screen). I cannot see messages on screen, wasn't ESC key for that? Live CD seems to boot but also hangs computer after loading purple login wallpaper before login dialog is shown. To me it seems a graphic card regression issue since intel mobo graphic card wasn't working fine on maverick too. Also tried to manage with fail-safe graphic mode but this also hangs computer. Is there any log where I can see errors during last bootup from maverick live-cd?
View 9 Replies View RelatedThe server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:
# cat /etc/grub.conf
default=0
timeout=20
[code]....
I've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
If i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies View RelatedWe have a Dell 1850 with Debian with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory,
After a lot of googling and the artical in linux.com/archive/articles/119287 :: Got more than a gig of RAM and 32-bit Linux? Here's how to use it i came to know the solution i.e
1)I need to install the Bigmem-kernel to detect the ram more than 4Gb,
2) or change some kernel parameters in configuration file and rebuild the kernel
Is there any another solution for this to update operating system to detect the more RAM
We have a Dell 1850 with Debian 3.0 (woody) with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory. i came to know the solution i.e I need to install the Bigmem-kernel to detect the ram more than 4Gb, Any another solution for this to update operating system to detect the more RAM.
View 6 Replies View RelatedMy company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
View 1 Replies View RelatedI'm using Ubuntu 10.04 with Windows 7 via Wubi.
Until yesterday, my kernel was 2.6.32-29.
Yesterday, I was offered 2.6.32-30 by the update manager and accepted it.
However, I can't boot up using that kernel. I get no video. (I'm now choosing -29 at bootup instead of -30. It still works.)
What should I be trying in order to get -30 to work?
Is it possible to upgrade the kernel 2.6.27 to 2.6.34 in ubuntu 8.10. As I tried doing,it went through the process but while booting it comes up with an error 15. I suspect that the latest kernel does not support.
View 1 Replies View Related