Ubuntu :: Login Screen Pops Up But The Resolution Is Messed Up
May 4, 2011
After a lot of headache and time I was finally able to get Ubuntu 11.04 64bit installed along side my Windows 7 64bit installation. The whole process was hindered by the screen resolution being really off, looked like this LINK (aspect ratio of (16:10) I believe it was). After much fiddling i was able to get the installation started hoping that in the end it would let me set the res. correctly once it was installed. About 75% of the way done it threw an error saying there was either a problem with the HDD or the CD, I know my HDD is fine, so I booted up windows and set up my USB thumb drive as the installation device, Unbootable.
My next attempt i hooked the laptop to my internet via cable and started the installation again, this time i found that I could set the res of the LiveCD (which was a pain in the neck) and this time Ubuntu installed and upgraded and seemed all sorts of happy! Once the PC rebooted and i selected to boot into Ubuntu, the(what i suppose is) login screen pops up but the resolution is messed up again and this time I can't navigate at all. I've tried just typing in my password and hitting enter as i can see that it is by default selecting my user name to login with.
View 2 Replies
ADVERTISEMENT
Jun 19, 2010
Ubuntu 10.04. I have fglrx driver installed.. It appears when i set the resolution to anything higher than 1024x768... the login screen background is messed up to
View 2 Replies
View Related
Jul 8, 2010
I just updated my netbook remix 9.10 to 10.04 and every time I boot up it freezes as soon as the login screen pops up. Before this said screen pops up I have the ability to move the cursor around freely, and if I mash the life out of enter I can get it to select my username, but freezes before the password entry bar has the chance to come up under it.
View 1 Replies
View Related
May 19, 2011
Everything was ok with my PC up until today when I booted and found out that my screen resolution was all messed up making my desktop look like this. My distribution is Ubuntu 11.04.
View 1 Replies
View Related
Feb 13, 2011
version 10.04.copy and pasted something into terminal and now the theme selection menu always pops up at the login screen, how do i get rid of that?
View 1 Replies
View Related
Oct 31, 2010
So I installed Unity-netbook and when I logged out and went to the login screen, half of my login screen was messed up.
View 1 Replies
View Related
Jul 15, 2011
I've got an HP ThinClient that my computer dumped in the recycling pile. I swapped out the ATA 1-gig flash drive, and replaced it with a 60 gig ATA hard drive. I installed Ubuntu on it through a flash-drive, and everything comes up just fine. When I boot up the computer, I get the ubuntu screen, it comes to the login, I select my username and enter my password. I hear the little jingle music, and then the computers graphics get messed up. I still see the mouse, and it appears as though I'm opening windows, but they come up really as just screwed up boxes that are black or other colors and the graphics get all distorted.
I just figured out how to get into the GRUB menu, and I was able to boot in reduced graphics mode. verything seems to be in 16 colors, but I can actually log in now and see everything! (really cool). Just to give an update, I can log into the computer using rescue mode, and I can do everything on the computer that I want to in 16-color mode or whatever that mode is. As soon as I reboot in the normal mode, the graphics mess up as SOON as I log in.
View 2 Replies
View Related
Jun 4, 2011
I installed Fedora on a separate partition and during the install prompts forgot to uncheck the Grub installation. So, Fedora installed with Grub 1 (imagine that) although I was able to find instructions to upgrade it to Grub 2 (plus it recognized all the OS on the computer). So far so good, I don't have a preference whether Fedora's or Ubuntu's Grub is installed, however the Ubuntu Startup Splash screen is messed up, ie. a simple purple background with "Ubuntu" in system fonts. Is there a way to fix this back to the graceful default splash screen? Can I change back the Grub to be Ubuntu's?
View 4 Replies
View Related
Jun 14, 2010
I was in the middle of deleting the Xine movie player, and clicked a box wrong. I lost everything possible on the graphical desktop as well as a log in screen for Ubuntu 9.10 (karmic). Since then I did a few things:1. apt-get install ubuntu-desktop2. apt-get install kubuntu-desktop3. apt-get remove kubuntu-desktopAfter all this, I still have the login screen for Kubuntu. But I don't want that. I want to get back to the Ubuntu login screen, and the orange colored desktop. Right now -- after I log in -- I only have a terminal to use. And I have the blue background of Kubuntu. What do I need to do to get rid of the Kubuntu graphics and back to my original login screen, plus the Ubuntu (karmic) graphics and toolbars / menus?
View 2 Replies
View Related
Dec 11, 2009
I am using ubuntu 8.04. At login prompt my screen resolution is 1024x768 which makes letters look so small how can I change it 800x600.In my user account I have set it to 800x600 using system>preferences>screen resolution.
View 3 Replies
View Related
Aug 13, 2009
Just installed F11. Been totally frustrated all day and all night with resolutions and DNS bugs. I installed system-config-display so I can get my video working properly. However, my monitor says it's out of range only on the login screen. How can I change the resolution for the login screen to match that of my working environment?
View 1 Replies
View Related
Jan 30, 2010
The login screen is always at maximum screen resolution, how can i change this?
View 2 Replies
View Related
Jul 5, 2011
Every time I reboot or shutdown my PC, the login window shortly pops up. The PC does shutdown or reboot normally afterwards. When I use the terminal to shutdown/reboot (sudo shutdown -h now or sudo reboot) all goes well. The PC is running Debian Squeeze with the GNOME desktop environment.
View 7 Replies
View Related
Jan 29, 2010
I installed Ubuntu 9.10 with VMware Workstation 6.5.0. The install went fine and I ran the updates and everything was working great. Then I decided to change the resolution to something a little larger that was actually workable and after a restart my taskbars were all messed up. I deleted that machine and then opened up the backup. I changed the resolution again and after a restart, same result. I've tried it with multiple resolutions with different aspect ratios all with the same results. I've included a link below with a screen shot of the desktop so you can see what it's doing. Now, it's not unusable but distracting to me nonetheless.
View 1 Replies
View Related
Jan 27, 2011
I built a new pc with an intel atom processor and 1Gb Ddr2 ram with on board sound and graphics. When i try to intal or boot live (from flash drive) The screen pops up asking boot or instal. Whether i choose either/or i recieve an error on my monitor saying input not supported. I got a similar error when i tried an older monitor. My current monitor is an aoc lcd screen (not sure of model no.)
View 14 Replies
View Related
Mar 31, 2010
I clean installed xubuntu on an old laptop. I think I messed up the original configuration of xorg though because the highest resolution is 800x600.
# dpkg-reconfigure xserver-xorg
or
$ sudo dpkg-reconfigure xserver-xorg
[code]....
View 1 Replies
View Related
Aug 6, 2010
It seems the latest nvidia drivers (255.44) don't seem to work on my Lenovo Thinkpad T61 in Lucid. Has anybody gotten it to work? I've tried to just use the System -> Drivers control panel to install and activate the current nvidia drivers as well as installing it from the command line. However, when I reboot, I see the nvidia splash screen come up for a second, then the screen goes blank, and then the nvidia splash screen pops up again, and then the screen goes blank again, over and over. It seems to be in some kind of infinite initialization loop. My T61 has the nvidia NVS 140m chipset. This is frustrating since the previous drivers seemed to work ok. When I try to revert to older drivers, it complains now that they're no longer compatible with the latest kernel headers, etc. I've had to boot up into the failsafe graphics mode to be able to use the laptop.
View 2 Replies
View Related
Feb 24, 2011
installation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies
View Related
Jul 24, 2011
Iam tring to install 11.4 on my new computer, when i start the computer the green screen pops up and syslinux starts. However when it finishes loading a dialog box pops up saying "Make sure that cd number 1 is in your drive" . Obviously it it is,
because i am booting from the dvd. I dropped to the shell where i saw this message "Inappropriate ioct1 for device". What does all this mean.
View 2 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
Aug 13, 2011
I recently installed Ubuntu 11.04, I tried to boot it and it was like my windows screen before I restarted my computer however it was all jumbled and scattered everywhere, how can I fix this?
View 7 Replies
View Related
Aug 22, 2010
I installed Docky, and docky has taken part of my screen. I have 80% of my screen layout. I do not know how to get back my full screen. how to get my full screen? worst case scenario, I do not mind un-installing Docky, but do not know how to do this.?
View 3 Replies
View Related
Oct 8, 2010
First off I'm loving my ubuntu experience on my other devices. My netbook and other laptops run wonderfully. I'm trying to get my HP dv6700 up and running but I'm having trouble right out of the gate. When I boot up on the CD the screen becomes "messed up". I can actually still see what is there, I just see basically three copies of everything, almost like it is out of sync. I assume this is a graphics card driver issue but how can I resolve this when it does it upon the installation screen? I'm trying to install Ubuntu 10.04.1.
View 4 Replies
View Related
Oct 30, 2010
i wanted to fix splash screen, to be in 1680x1050 resulution, so i've found this: [URL].... After restart i don't have Ubuntu, with Linux 2.6.35-22-generic, just Ubuntu, with Linux 2.6.35-22-generic (recovery mode) My grub.cfg
[code]....
View 9 Replies
View Related
Jan 22, 2011
My screen gets all messed up (pixelated) for about a second when starting Maverick10.10. It first started when loading Blender2.56. Can someone explain to me what maybe causing this as I don't even know if it's a graphics card issue or not. I tried searching on the net for people with similar problems but couldn't find anything. Radeon x300 graphics card using the open source drivers.
View 2 Replies
View Related
Mar 28, 2010
I have to hold a presentation using a projector in a few days and I have to bring my own laptop, so I tried hooking up a second monitor to test if it works. As it turns out, the second monitor works fine, but then my main screen is messed up. I'm using Ubuntu 9.04 and I'm doing this on a HP Pavilion DV4000 laptop. My main screen shows just the bottom (cca) 400 pixels of the wallpaper, no bottom panel, no desktop icons. And I'm kind of scared to remove the second monitor now cause I don't know what I'll do if I don't get the main screen back.. Well, other than installing 9.10 beta that is..
View 4 Replies
View Related
Jun 10, 2011
I was following a lesson with my UNIX Academy training and by mistake made a change to inittab. now it boots into black screen. How can I get into shell to fix inittab
View 2 Replies
View Related
Feb 25, 2011
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies
View Related
Sep 17, 2010
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
View 2 Replies
View Related
Dec 22, 2008
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies
View Related
