I'm trying to install a 1GB RAM stick into my laptop. The laptop comes with a 2x256MB setup. Only one of the sticks is physically accessible. So the maximum memory in the specs is 1.25GB. The stick is PC2700, same as the old stick. I am sure it is installed correctly. I took all static precautions. The BIOS recognizes the RAM - 1.25GB total. But Ubuntu just won't. I've got both 9.10 x64 and 9.04 x32 installed. Neither will boot. Memtest only shows the 768k of base RAM, and NONE of the extended RAM shows up - not even the initial 256MB.
I tried turning on boot logging, but the /var/logs/boot was still empty. When I turn off the splash screen, I see a whole mess of errors, which basically stem from the fact that there is no extended memory. What the hell is happening? This is the second RAM stick I've tried, so I'm pretty sure that's not the problem. I only have two days to decide whether to return it!
I installed a 1GB PC2700 SODIMM in my Compaq R3000 Athlon 64 laptop.
I am currently running Mint 7 (32 bit), 2.6.28-11-generic.
I removed one of my two 256MB sticks and installed the new 1GB stick.
When I installed the memory, the BIOS was able to recognize it, saying I had 1.25 GB of memory.
However, Linux refused to boot.
When I did a Memtest, I got nothing - it scanned the 768k of system memory in a fraction of a second, and then rebooted. It couldn't see either my new 1GB stick or my old 256MB stick.
Did I install the wrong type of RAM? Was the stick invalid?
It started when I tried to install Kubuntu 10.10. It booted OK from the CD, but after I installed it, it wouldn't boot. It would hang showing "floppy: no floppy found". I think the next part is either initializing swap or disks. No matter what, I couldn't it to boot.
So, I installed with Xubuntu. it worked great, and booted fine a few times. Worked a couple days.
But just today, after updating to the new kernel, it won't boot at all. It gets stuck at the same place!
It does this even if I go back to the old kernel on the boot list.
When I boot into recovery mode, SOMETIMES it will boot. Actually, just once. All other times, it failed to boot even in recovery. I attached the dmesg from one of these boots.
I booted into a puppy partition, and fsck -f my other partitions. It reported no problems.
Could it be a hard drive problem? I don't hear anything from the drive, but it's getting old and I was planning on replacing it soon anyhow.
My computer is a Compaq R3000 AMD64, but I'm running the 32 bit OS.
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
I have a problem with installing OpenSUSE 11.3 on my server Compaq ML370 G3.4 gb memory and 6 drives, all at 36,4Gb(scsi)On the server it is the Compaq Smart Array 532 controller. When i install from the DVD, after i choose the default keyboard, the an error comes up, and it is restarting the installation process.When i use liveCD i can get to the desktop, but then evrything hangs.
I have tryed the SLES 11 SP1 and i think and as I recall i can perhaps manually the drivers to the installation.But my main question is, Is there a way to add the controller drivers in the installation prosess of OpenSUSE 11.3?
I'm new to linux and have an old laptop did clean reinstall windows 98 but no updates, and now burnt iso image to cd on other pc and used it to try running puppy linux 3.01 on the compaq armada laptop (spec 56.0MB RAM, AMD-K6(tm)-III Processor used space 645MB free 3.80GB). I chose this older version as I think I'd read that this is more suitable for older slow computers.
I am interested in running linux fully without windows 98 or with it. Running from CD I have to select Xvesa I think as Xorg didn't seem to work. Tried partitioning but in GParted find myself unable to amend the size of partitions - got yellow exclamation mark next to the partitions. What I see is: greyed out unallocated 7.38MB, then /dev/hda1 yellow exclamation mark filesystem unknown 206.72MB, /dev/hda2 yellow exclamation fat32 4.45GB.
It does not allow resizing when I try. Associated with the yellow exclamation marks is the warning "unable to read the contents of this filesystem! Because of this some operations may be unavailable. I have done a defragment of C in windows already. (Also haven't been able to connect to internet on linnux with my wireless card.)
I have been trying to install Ubuntu Lucid Lynx using Live CD on this machine, a compaq Presario SR5010NX, with Celeron D 3.46Ghz CPU. Bios Version American Megatrends, Inc. 5.18, 2007; 2 gigs of RAM with approx. 140 gigs of hard disk space total useable. Has Realtek High Definition audio, graphic chipset Intel 82945G family; Soft data fax modem with smart CP (internal modem). It is connected to my DSL modem/router, Netgear DGN2000, with ethernet cable (as are my other two computers).
I start the installation. Finally the desktop shows up. As soon as I start trying to navigate, my mouse freezes and that's as far as I can go.
Just out of curiosity, I also tried to use my Mint 8 CD. It did the same thing. Gets the desktop up, then freezes. I am so frustrated because I really want Ubuntu on this machine. I planned on wiping out Vista Home Basic and giving the whole thing to Ubuntu.
Anyway, went on a wild goose chase for a couple of days trying to get a USB headset working with Skype, which I achieved, then I was informed today not required but built in mic and speaker was. Hmm. So, I succeeded in screwing things up when really didn't have time to fix it and now completely stumped.
Problem: Speaker works fine but front headphone socket now dead. Cuts out speaker but no sound. Headphone socket essential for user's day to day computing.
Results of cat /proc/asound/card0/codec#* | grep Codec
Code: Codec: IDT 92HD71BXX Codec: Generic 11c1 ID 1040 * Preferences in System->Preferences->Sound all set to Autodetect except sound
[Code].....
I have followed every howto and attempted every tweak out there and nothing has worked for me to get this headphone socket alive again. It was working fine before. Bottom line:
New Compaq 610. All good so far but the fan seems to be on continually. Checked load cycle count and seems to be okay so far.
Any ideas? It wasn't doing this before and don't remember doing anything to make it happen but I have been tweaking a bit while setting up the machine.
I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensors-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)
Trying to install xubuntu 9.10 on an older Compaq Armada M700. Starts up fine from the CD. I choose English and then choose Install Xubuntu from the menu. It attempts to install for about 20 minutes and then freezes up. I am never prompted for any other choices during the installation. I have WindowsXP installed on the machine, but want to wipe it out and just have Xubuntu installed.
I am trying to install Ubuntu 10.04 on my Compaq CQ50-215CA laptop. But, instead I am seeing a blank screen. This laptop has Geforce Nvidia 8200G M video card.Not sure whether it is related to the video card or not, but thought it is better to get tips from people who were successful in installing on this type of laptop.
i've got my friend into trouble in my zeal to wean away my friend from windows. i convinced him to go for a dual boot system of XP and U 9.10. first we successfully installed XP but then got stuck when we were unable to locate the chipset driver - not even the HP website (horrible) had it ! it seemed to offer everything from modem drivers to utilities but there is no trace of the chipset / motherboard drivers. we then tried to install U 9.10 and got an error message in the middle of the installation process. it has been discussed in this forum but without any clear resolution. basically, it said the following -
Code: [Errno 5] Input/output error This particular error is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. btw, all along we suspected that there could be something wrong with the HDD of his computer which is Compaq Presario C 505 TU. i then tried to install U 9.10 completely on the HDD and this time got the same error message! similar problems came up when i tried installing with U 8.10 and U 9.04 we finally gave up but did run a HDD test from within the BIOS (Phoenix). The result was clear and we got the message - "SMART pass". so basically the computer is not working now because there seems to be a problem with the chipset drivers while i can't get any version of Ubuntu to install on the machine
I wanted to play w/ Linux at home so I bought the O'Reilly "Ubuntu: Up and Running" book. I'm using the included 10.04 CD. I'm not finding much info on installing from a CD there (well, not finding it easily at least).
I got an old Compaq desktop (model 5WV280, if that matters) from a friend. I checked the BIOS listing; it lists the CD as the first boot drive, diskette second, hard disk third. I don't have the password for his account, but I didn't think that would matter.
Anyway, I inserted the CD, did a shutdown and power up. The CD drive spins and the light comes on. Next, the diskette tries to spin and the light comes on. Finally the hard disk access light comes on and the silly thing boots to Windows XP Pro from the hard drive.
Did I miss something? I put the CD in my (heaven help me) Vista machine, and was able to read the CD with no problems.
I burned ubuntu 10.4 desktop onto a CD and tried to install it on an old compaq. It was really slow but got to the popup window that asks your language and if you want to demo it or install it. I click on the try it button, but then it doesn't respond. I can move the window, but nothing else. It only has 128 meg of RAM, and hard drive shouldn't matter. The processor (I think) is a "AuthenticAMD AMD-K6(tm) 3D. I couldn't find the processor speed. Would it help if I tried the netbook edition?
new Compaq 510 laptop in which we installed Ubuntu 10.04. When Wireless is switched on it shows the available networks but won't connect. It connected on a few occasions but still we can't browse. The proxy settings are correct.Will installing wireless drivers help? If so, where can we find them?
After using Ubuntu for a while I have decided I wanted to do a fresh install onto my PC, however being rather old it (about 6 years old), It seems I cannot get any recent kernels to run on the system. As such, I cannot get the live CD to boot. After searching for hours to find a solution I have found nothing.
Upgrading also breaks the system as well, So to do so wouldn't work.[URL].. with addition of a 256MB RAM chip and starting with a 512 rather then the 256 stated on the page. and a ATI Radeon 9800.
Is there anyway I can get newer kernels/Live CD to boot? I've tried all options i've found in other threads but no go.
I'm having a problem with installing ubuntu 10.10 and even 10.04.1 on my Compaq EVO n610c when i put my DVD (4,7gb) it does read it but it doesn't install and goes back to my windows XP, when i do it on the USB it does the same thing.. i cant get it to work and i changed in the bios the thing that you can choice wich thing first boots but i dont see USB either
I recently installed Ubuntu Desktop Edition 10.10 . Everything works fine till the wifi is switched on. It keeps blinking and seems to work sometimes and intermittently hangs the system. Plus the machine hangs while shutting down whenever the wifi is turned on. I tried out acpi=no, pci=noacpi .
Note:I was also getting rt2800_pci_MCU_Status related hardware error and then added rt2800 to the blacklist.cfg , but this does not seem have affected the wifi and the hanging issue.
I have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz Memory: 1GB ROM Date & revision: 01/07/2011, 68PVI Ver. F.09 Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
I just got a new Compaq CQ56 and installed 11.04 32 bit on it. Everything is great except the wireless is not working. I can't even get it to detect the wireless card.
iwconfig: no wireless extensions [URL]
Here is the link to the Compaq website. It doesn't say what brand the wireless card is.
I have a presario compaq computer and I don't know how to get my wireless to work while using ubuntu. Do i need to install things or what is it that i need to do?
