I am trying to install Ubuntu 10.04 on my Compaq CQ50-215CA laptop. But, instead I am seeing a blank screen. This laptop has Geforce Nvidia 8200G M video card.Not sure whether it is related to the video card or not, but thought it is better to get tips from people who were successful in installing on this type of laptop.
View 6 RepliesI installed Ubuntu 10.4 on my laptop compaq presario CQ50 I cannot go online, because the drivers does not exist ? where can I download them? the wireless flash blue by the way, and it was working before I switch to Linux is there anyway to find driver for my wireless compatible?
View 5 Replies View RelatedI came back to debian after trying many others because it installed flawlessly and worked. I'm on the testing channel and upgrade nearly everyday and after a recent upgrade my xsession (Xfce4) display won't wake up any more after I close and re-open the lid. I know the box is awake because I can go to a ctr-alt-fn console login and use it normally. How can I track this down? And is there some way I can restart the gui display from the console without losing what was running before I shut the lid? Right now the only way I can recover is to restart the computer.
View 1 Replies View RelatedTrying to install xubuntu 9.10 on an older Compaq Armada M700. Starts up fine from the CD. I choose English and then choose Install Xubuntu from the menu. It attempts to install for about 20 minutes and then freezes up. I am never prompted for any other choices during the installation. I have WindowsXP installed on the machine, but want to wipe it out and just have Xubuntu installed.
View 2 Replies View Relatedi've got my friend into trouble in my zeal to wean away my friend from windows. i convinced him to go for a dual boot system of XP and U 9.10. first we successfully installed XP but then got stuck when we were unable to locate the chipset driver - not even the HP website (horrible) had it ! it seemed to offer everything from modem drivers to utilities but there is no trace of the chipset / motherboard drivers. we then tried to install U 9.10 and got an error message in the middle of the installation process. it has been discussed in this forum but without any clear resolution. basically, it said the following -
Code:
[Errno 5] Input/output error This particular error is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. btw, all along we suspected that there could be something wrong with the HDD of his computer which is Compaq Presario C 505 TU. i then tried to install U 9.10 completely on the HDD and this time got the same error message! similar problems came up when i tried installing with U 8.10 and U 9.04 we finally gave up but did run a HDD test from within the BIOS (Phoenix). The result was clear and we got the message - "SMART pass". so basically the computer is not working now because there seems to be a problem with the chipset drivers while i can't get any version of Ubuntu to install on the machine
I wanted to play w/ Linux at home so I bought the O'Reilly "Ubuntu: Up and Running" book. I'm using the included 10.04 CD. I'm not finding much info on installing from a CD there (well, not finding it easily at least).
I got an old Compaq desktop (model 5WV280, if that matters) from a friend. I checked the BIOS listing; it lists the CD as the first boot drive, diskette second, hard disk third. I don't have the password for his account, but I didn't think that would matter.
Anyway, I inserted the CD, did a shutdown and power up. The CD drive spins and the light comes on. Next, the diskette tries to spin and the light comes on. Finally the hard disk access light comes on and the silly thing boots to Windows XP Pro from the hard drive.
Did I miss something? I put the CD in my (heaven help me) Vista machine, and was able to read the CD with no problems.
I burned ubuntu 10.4 desktop onto a CD and tried to install it on an old compaq. It was really slow but got to the popup window that asks your language and if you want to demo it or install it. I click on the try it button, but then it doesn't respond. I can move the window, but nothing else. It only has 128 meg of RAM, and hard drive shouldn't matter. The processor (I think) is a "AuthenticAMD AMD-K6(tm) 3D. I couldn't find the processor speed. Would it help if I tried the netbook edition?
View 1 Replies View RelatedAfter using Ubuntu for a while I have decided I wanted to do a fresh install onto my PC, however being rather old it (about 6 years old), It seems I cannot get any recent kernels to run on the system. As such, I cannot get the live CD to boot. After searching for hours to find a solution I have found nothing.
Upgrading also breaks the system as well, So to do so wouldn't work.[URL].. with addition of a 256MB RAM chip and starting with a 512 rather then the 256 stated on the page. and a ATI Radeon 9800.
Is there anyway I can get newer kernels/Live CD to boot? I've tried all options i've found in other threads but no go.
I'm having a problem with installing ubuntu 10.10 and even 10.04.1 on my Compaq EVO n610c when i put my DVD (4,7gb) it does read it but it doesn't install and goes back to my windows XP, when i do it on the USB it does the same thing.. i cant get it to work and i changed in the bios the thing that you can choice wich thing first boots but i dont see USB either
View 8 Replies View RelatedHas anybody idea which distribution of linux shoud run on HP compaq nx 9010 without problems?
View 3 Replies View RelatedI have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz
Memory: 1GB
ROM Date & revision: 01/07/2011, 68PVI Ver. F.09
Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
I'm an absolute newbie to linux/Debian/Ubuntu. Problem: Ubuntu is loaded successfully but does not run - I just get a blank screen.
The machine specs:
HP Compaq 615
Processor AMD Athlon X2 DualCore QL-64
Processor speed 2100 MHz
ROM date 07/17/2009
ROM Revision 68GVV Ver F.04
Video Bios Revision : ATI 05/07/09
History: I downloaded Ubuntu, burnt a CD and it runs fine on my Saraha machine and it ran fine on the HO Compaq as well - from the CD. So I selected install. At the end of install when I had to reboot, the screen was filled with error messages I/O error on sector pages of the messages. Then downloaded the notebook version and again both laptops ran fine from CD. Installed Ubuntu (deleting everything else) and exactly the same problem.
After reading this forum posts I tried pressing F6 and got a screen with options. Selected them all, installed again - but same blank screen problem. Read this forum again - and found lots of posts with the same problem - on the same machine, but it appears no solutions. I'm at the point of walking away, but really would like to give open source a realistic try. I'm afraid to install Ubunto on any other machine as we may end up with nothing working.
I install ubuntu in a compaq mini CQ10 and it worked very well, found no problems with the hardware, then I start to download more than 200 mb of updates from the update manager, after the reboot, a black screen appears with a underscore in the top and ubuntu doesn't start.
View 2 Replies View RelatedI have got a lap top (Compaq Mini 311), I tried to install Ubuntu 10.04, but after installing it I found only a black screen with a blinking whithe bar, and the keyboard does not work anymore.Looking across the net, I found this page , where is written that I have to install the previous version, do some operation and then upgrade it. Well, also with Ubuntu 9.10 and Ubuntu 9.04 I have got the same problem: total freezeing of the computer after the installation.
So, I tried to install ubuntu with wubi, as a virtual machine, but the problem is exactly the same.Somethimes, it may happen that Ubuntu loads, but it happens about in 1/50 cases.I installed it many times, everytime erasing the partition, but actually I have a boot menu with about 6 or 7 linux (not working), and windows, loading windows I can choose between win and ubuntu, if I choose ubuntu, I have 5 options: 4 are not-working-linux, and one of them is windows. If I choose windows, I come back to the previous menu: a loop on grub was done, but I don't know how.
I'm trying to install Ubuntu on my Mini 700 EL and when I start it doesn't give me the option to install it alongside Windows. Wubi does not give me the option to install onto the system, only to reboot and install it completely. When I try to install from booting from the USB key, I decide to edit partitions manually and I don't get the option of resizing the Windows partition, I can only delete it.
View 2 Replies View RelatedSo my problem is that i installed 10.04 on my compaq nx6315 and it crashes too much i did it like 7 times getting same results even with new downloads.IDK if i would run on troubles cause is an old release?
View 9 Replies View RelatedI have tried to boot from Fedora 10 CD on Compaq Evo D510 desktop as well as HP Pavilion DV6700 Laptop several times. Goes through everything for a long time. Ends up in a screen with colored stripes on the desktop and a blank dark screen on the laptop. I do see the wireless light on the laptop turn blue from orange indicating it is enabled. But was of no use. Both machines crash at the end. I tried both GNOME and KDE.....both crashI am suspecting the display drivers. The desktop has a Intel Chipset and the laptop Nvidia GForce 8600 I guess....These are not old comps. The desktop is just a couple of years old and the laptop is brand new. This is without actually installing Fedora
View 5 Replies View RelatedIm currently using Windows XP on my HP Compaq nx5000 and want to install Ubuntu on it. Do i use the Desktop ISO file or another.
View 2 Replies View RelatedI'm trying to install Lubuntu 11.04 CD on a Compaq Presario M2000 Laptop to replace XP.
Processor: Intel Pentium Celeron M
RAM: 256mb
Existing O/S XP SP3 (boots & runs but is very slow)
Hard Drive 40GB (28Gb free)
Installation hangs about 1 minute after selecting language in both try Lubuntu & install Lubuntu modes. Have also left the laptop running all night to see if it was just a slow install. Have tried various other disks (Xbuntu, Puppy, Mint, Lubuntu 10.04), which have worked on other PC/laptops ok, but all stall after the language settings. Have tried burning the Lunbuntu iso with both Windows & Ubuntu at slow speeds & have verified the burnt iso. The laptop BIOS cannot be set to boot from usb, so an external CD or USB stick installation may not work? The BIOS has been updated to the latest one on the Compaq web site this morning. Although I have installed a few flavours of Linux on various hardware, I'm still a real Linux newbie. Can Lubuntu be installed within Windows, but still format the hard drive to ext2/3 ?
I've decided to try Linux again after a 5 year gap - in around 2005 I installed Suse (I think and I'm not sure of the version) to an Hp laptop and, back then I got hugely frustrated that I had no sound, couldn't for the life of me figure out how to install the driver and gave up after around a week. new company, new laptop, thought I'd try again in 2010 - I'm trying to use the laptop as a work machine mainly, but for dj-ing in an emergency, so I need a 2nd Os and Linux fit the bill. I've got 10 years of It experience, though these days am a Project Manager by day. I've technical enough, but don't have much time.
Naturally I assumed that, by now, everything would be nice and smooth. And, at first, it was - I chose Debian Studio edition (low latency) found a usb linux creator (this is a netbook so no cd drive), Linuxlive usb creator, made up a usb key of Debian 10.04 (desktop edition, as I was informed this was the standard and that I could upgrade to studio after), partitioned my drive, installed and.... Black screen, flashing cursor.
Ok - found some instructions that told me how to work round that...did...but then couldn't get wireless (I've only got wireless internet). ended up, after a day of fiddling with 'blacklisting' drivers, deciding their must be something wrong with my install, so started again with the 'netbook' edition of debian 10.04. This time it boots. Still no wireless.
Now I find people saying things like "blacklist this driver" (b43 and b44) and "connect to the internet and install this driver". Only one problem - only wireless internet - if I go to install more drivers it tells me there aren't any. So I think "I'll install a driver from usb". Naively assuming that by now it'll be a self contained installable package like windows and osx. I find that I need an 'STA' driver (and frankly by now I've spent a long time on forums - this was meant to be easy). Ok - I find the 802.11 Linux STA driver on the broadcom site (can't post links here yet). ownload the 32 bit version, stick it on a key...read the readme and.... Frankly, I'm one step away from trying to roll this all back. I cannot believe I need to be in a 'terminal' typing;
# lsmod | grep "b43|ssb|wl"
# rmmod b43
# rmmod ssb
# rmmod wl
and so on.
either way, I plough on and get to # insmod wl.ko but it says it can't find it. how to install this driver? Is it even the right one? PS I'm staggered Linux is still so non techie friendly.
It started when I tried to install Kubuntu 10.10. It booted OK from the CD, but after I installed it, it wouldn't boot. It would hang showing "floppy: no floppy found". I think the next part is either initializing swap or disks. No matter what, I couldn't it to boot.
So, I installed with Xubuntu. it worked great, and booted fine a few times. Worked a couple days.
But just today, after updating to the new kernel, it won't boot at all. It gets stuck at the same place!
It does this even if I go back to the old kernel on the boot list.
When I boot into recovery mode, SOMETIMES it will boot. Actually, just once. All other times, it failed to boot even in recovery. I attached the dmesg from one of these boots.
I booted into a puppy partition, and fsck -f my other partitions. It reported no problems.
Could it be a hard drive problem? I don't hear anything from the drive, but it's getting old and I was planning on replacing it soon anyhow.
My computer is a Compaq R3000 AMD64, but I'm running the 32 bit OS.
I've just got a second-hand computer at a bargain price and I would love to install Fedora 10. I have some previous knowledge on Ubuntu, so I'm not completely new to Linux, but I'm pretty amateur still. Anyway, I have some trouble installing either Fedora or Ubuntu to this machine right now. It has an AMD Sempron 3800+ (2,2 GHz) & an ATI Mobility Radeon X1250. I have the usual "Automatic boot" screen.
Then everything seems to load fine, besides I have an apciphp error. After this single line of error, I have the usual loading bar; and then a blank screen - nothing seems to happen. I saw there were some issues installing Linux on this model - so if you can help me solve this, I'm sure other people will benefit as well!
I can not for the life of me get the instaltion started on this computer I have made a seperate partition on the hard disk. But every time I go to install Fendora to the computer it says there is not enough disk space. Ive tired to the srink current system option and it gives me an error. Is there something in the format of the partition that is wrong? At this point I am lost. I will answer all question about the system I not sure what info you guys need. The current OS on the laptop is windows 7.
View 1 Replies View RelatedIm looking at buying an HP Proliant server with 4 cpus, like this [URL] will Debian be able to run on this and use the 4 CPUs?
View 2 Replies View RelatedWhen trying to install Lucid on my HP Compaq 6710b (INTEL Mobile GM965/960 graphic controller) using the alternate i386cd with an usb pen i (re-)experiencing (known from the Jaunty installation) the following problem:Boot from USB (works) Select language (works) Choose to install ubuntu (works) Removing quit from the boot options, hit enter, see some output (works) Starting the installation interface (fail) The screen wents to black, but system seems not froozen. What i've tried to fix this issue:fb=false as bootoption (worked in jaunty, does not work with lucid) frambuffer=false
fb=off
debian-installer/framebuffer=false
vga=123, tried all of the offered modes
vga=771 (get some screwed up output on the screen, which i guess from that the system/machine is not frozen)
i915.modeset=1
i915.modeset=0
xforcevesa etc
Anyone managed to install Lucids with INTEL graphics + the alternate cd? PS: I need the alternate cd to setup an encrypted system. PPS: Just tested the desktop i386 image which works flawlessly.
I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
View 9 Replies View RelatedI made a clean install of Ubunto 10.10 on my Compaq Presarion F700, nVida graphics, AMD Turion 64x2.Installation was fine.When I boot, it takes a lot of time, 5 minutes or more.Also, after the system loads I get those applet errors I've attached. Sometimes I get all the applet errors and sometimes it get few of them.I tried several configs of "GRUB_CMDLINE_LINUX_DEFAULT" but still no luck.
View 2 Replies View Relatedi tried to install ubuntu netbook remix edition 10.04 on my laptop HP Compaq 550 through a usb flash stick ... with the usb creator which included into the iso image i got this msg (( attached screen-shot )) .i tried another application which makes a usb bootable disk called "UNetbootin" it boots successfully but after booting every thing got FREEZED ... i tried the same thing with ubuntu 9.10 it's succeed .. but i neeed to install 10.04 .
View 8 Replies View RelatedI tried installing Ubuntu on an old Presario I had hidden in the closet.After the install I try to boot up the OS. Prior to getting to the login screen I see a series of messages. One message is an error. The error tells me that I must update BIOS (can not from the Compaq site or anywhere else for the matter) or use the command:
Code:
force=1
I tried finding information on how to implement that but to my dismay I could not find any answers. how I would be able to utilize this command and override this BIOS problem so i can fully use Ubuntu 10.04 on this old dinosaur?
Anyway, went on a wild goose chase for a couple of days trying to get a USB headset working with Skype, which I achieved, then I was informed today not required but built in mic and speaker was. Hmm. So, I succeeded in screwing things up when really didn't have time to fix it and now completely stumped.
Problem: Speaker works fine but front headphone socket now dead. Cuts out speaker but no sound. Headphone socket essential for user's day to day computing.
Tech details. Compaq 610 running Ubuntu Hardy 64bit.
Results of cat /proc/asound/card0/codec#* | grep Codec
Code:
Codec: IDT 92HD71BXX
Codec: Generic 11c1 ID 1040
* Preferences in System->Preferences->Sound all set to Autodetect except sound
[Code].....
I have followed every howto and attempted every tweak out there and nothing has worked for me to get this headphone socket alive again. It was working fine before. Bottom line: