trying to install the software for my wireless usb card, but when I put the disk in the drive the icon comes up. When I click on it has a bunch of different option, and one of them is setup. When I double click it, I get this message: Archive: /media/cdrom0/setup.exe zip file size: 4611104 bytes, number of entries: 29842 [/media/cdrom0/setup.exe]: Zipfile is disk 39299 of a multi-disk archive, adn this is not the disk on which the central zipfile directory begins. Cdisk(3569.
I use Ubuntu 10.4 or 10.3 (How do I find out)I'm trying to install the drivers for my wireless card (I don't know what hardware I use) I'm running on a Compaq Laptop 6735s and I was told to use this This site tells me to pick either a 32 bit or 64 bit, I don't know which one I am. so I can run off my wi-fi internet?
I am completely new to linux so a lot of this has been foreign to me. I have ran the lspci command to find out my wireless card is Broadcom Corporation BCM4313 and I found the driver for this card at:it won't let me post the URL for some reason...but i googled "Broadcom BCM4313 driver for linux" and it's the first link.I downloaded the 32-bit driver but now I have absolutely no idea what to do.The download has folders named lib and src, and a text file called Makefile.
I have MacBook 3,1. I just installed 11.04. When I go to activate the "Broadcom STA wireless driver" I get the message "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log" When I check the log the message is "2011-04-28 18:38:59,896 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted"
I have had 10.04 on this computer in the past and it worked fine, but this is a fresh install of 11.04. Any suggestions on where to go from here?
i came across BT4 last few weeks ago, and i tried it in vmware and was tempted to know more, so now i wanna try to install it and dual boot. Here's my problem, when installing the install.sh i get 2 options instead of 3 options in the partioner, so i couldnt install BT4 without erasing my W7, also if i do successfully install it, how do i install drivers for my wireless card, ohh and my laptop is a Acer Aspire 4736G, my wireless card is a intel(R) WiFi Link 5100AGN...
I'm working with 10.10 (Maverick) on an older Compaq laptop. Wireless card is a Cisco Aironet 350. This card is listed as supported and drivers included in the server distro.
During the Network configuration portion of the install, I selected eth1 (wireless); the card came active and a valid network connection was established.
However, after the full server installation the interface (eth1) is not seen.
What's confusing is that modprobe -l shows the drivers as present:
I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:
# mkdir hybrid_wl # cd hybrid_wl # tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz
The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.
I have installed Fedora 8 on my laptop. My laptop has a " Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI " wireless Card. I want to get the wireless working. I did an 'lsmod' and I found that the modules for this card is not installed. I tried to start Network Manager, but network manager cannot connect to wireless but it cant. How and where can I get the drivers for this and how do I install those modules. My laptop is a Dell vostro 1400.
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
I've got an old Compaq Armada laptop (850 mhz PIII processor, 512mb RAM, 30GB HD, DVD ROM) that I've been running OpenSUSE 11.1 on in a dual boot configuration with WinXP for almost a year. I've downloaded and burned a LiveCD of OpenSUSE 11.2 and booted the computer with it. Very impressive. I want to install it on the HD without doing a clean install. That is, I want to replace 11.1 and keep the WinXP partition intact. My biggest trepidation is getting the wireless card configured again. It was a bear the first time. Is there a way to update OpenSUSE without losing those settings?
i just installed debian after about 2 weeks of using ubuntu afterriend suggested switching, and it's not detecting my wireless card in the network settings. i'm new at linux so try to keep it simple if you can please,i read the sticky about this and here's the info it said i should provide
ispci -knn Code: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Kernel driver in use: agpgart-intel
Here ASUSTeK Computer Inc. - Networks - ASUS PCE-N13
you may download the driver and install it yourself; once you've succeeded, I am a one-time Linux convert and quitter that gave up on Linux a long time ago, because frankly it is too complicated and I'm just a user who needs to get things done today, not in the few weeks time it takes to figure these things out. Since Debian Squeeze got released I wanna test it out, but my PCI card, ASUS PCE-N13 needs to be set up.
Driver install too technically advanced.
The accompanying instructions are far from self-evident:
I wonder if there is anyone who could install the Wireless card drivers in Backtrack 3? and post where i can download it later?My Wireless card:Intel Wifi Link 5100 AGN( I found a post but i dont understand it and im new whit linux HERE )
i have found a flavor or linux i now prefer and i installed it on my laptop. i went to configure the wireless card and it tells me no wireless networks found. i can run off of the ethernet port just fine. the wireless card that's in this laptop is a cisco mpci-350 series. i would like to be able to use the laptop without having to be tethered to an ethernet cable. what can i do. how do i correct it and how would i go about installing the driver if i have to in zencafe since there isnt anywhere to install a driver.
With nearly all Linux distributions (Ubuntu, Kubuntu, and Linux Mint being the exceptions), my system never seems to recognize that my laptop even has a wireless card attached to it. That is, when I run "lspci" the wireless card doesn't even show up on the list like it does with Ubuntu/Kubuntu/Mint. This narrows my options when it comes to choosing a distro to install on my computer. I can't seem to find instructions as to how I can make my wireless card work. I assume it needs a driver. I managed to find the driver, I think, in the form of a .tar.gz file. The card is a Realtek Semiconductor, RTL 8191SEvB Wireless Lan Controller (rev 10).
I am running Ubuntu 9.1 on my Gateway M305CRV and love it . . HOWEVER:Less I am plugged directly into the internet with Ethernet cable . . I have not internet. I purchased this laptop just prior to when internal wireless cards/ modems were standard . . thus I have an external Dell brand (True Mobile 1300-802.11 b/g PC Card) wireless card.Ubuntu does not seem to automatically detect it and I dont see
During the installation process, configure the network installation process requires, as a result of my wireless network card can not be drived, It is not possible to continue with the installation,please help me.
I have tired everything I know how to do and I can not install the driver for the rtl8191se. I read the instructions that say to run:
sudo make
I have been through this before with Fedora. Ubuntu supported my wireless card but not my display so I am switching to this OS. Does anyone know how to install the driver on 11.4 suse?
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011> sudo makemake -C /lib/modules/2.6.37.1-1.2-desktop/build M=/home/joecamel/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011 modules make: *** /lib/modules/2.6.37.1-1.2-desktop/build: No such file or directory. Stop. make: *** [all] Error 2 joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011>
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
installing the PCI wireless card drivers in CentOS linux. I have "Sabrent PCI-G802 PCI Wireless Card - 54Mbps, 802.11g". I tried looking in google and tried multiple ways to install the driver but failed , I have followed the instructions given in the link i.e. performed the following steps .....
1.# tar xvzf package.tar.gz (or tar xvjf package.tar.bz2) 2.# cd package 3.# ./configure 4.# make 5.# make install
I have the original cd (this cd has linux drivers also) which came with the PCI card but its not a plug and play cd like the MS windows, the cd drive is not reading the disk (But i can open it in windows 7). I copied the installation files from the cd to usb drive on my windows 7 PC and copied them on to the CentOS /home/user directory and performed the above mentioned steps. I was successful in getting till the second step. when i did the step 3 the system is asking some thing about
what I need is : 1/ make run the wifi USB card D-Link DWA-110
2/ I saw I had problems with yum: when I launch the "add/remove programs" button in the menu, if the "c5-media" item is checked (and only this one) and the DVD of centOS is in the drive, then I have this message : "cannot retrieve repository metadata (repomd.xml) for repository: c5-media. Please verify its path and try again" I specify I modified the /var/run/yum.pid file (removed the only number which was here)
the main issue for me is the yum failure, because it could be needed for the wifi problem. one thing after the other! the installation is totally new (except that I modified the yum.pid file).
