if I install some benchmarking utilities via WINE, should I expect inaccurate results? I know about other benchmarking apps such as phoronix, but there are so many more I want to use that are of the .exe nature.
View 4 Replieswhen I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies View Relatedi want to install wine on rhel 5.plz send me wine installtion command.
View 1 Replies View RelatedLot of questions about WINE... When I'm done I'm going to make a HOWTO so that others can do what I did It's hard work, but I'm nearly done.The last problem I'm having is the WINE menu on GNOME won't show up after a install of WINE from a .deb package (it usually does). This was after I compiled WINE from source and removed it with "make uninstall" and "rm -rf /.wine".So now I installed the WINE from a deb package and the Wine menu entry is not showing up.I've tried re-installing Wine and rebooting my PC but nothing seems to work.
View 3 Replies View RelatedI have used same Hardware and OS platfrom for web server benchmarking and i have used similar php and jsp scripts for Apache and Tomcat. For this testing i have used apache ab benchmarking toolFrom this statistics i would like to clarify the performances about Apache and Tomcat.
1. why Tomcat have taken too much of time to finish this 10 million requests to compare with Apache?
2. why this huge different for "Request per Second"?
3. To Tomcat i have increased multi thread level 300 and JVM memory usage upto 2048mb(but performances not increased), rather than these, is there any other performance tune-up settings for Tomcat?
4. from these statistics, can i come to the conclusion that apache is the best?
5.do u feel that ab tool favouring to Apache?
I was wondering if "Standard system utilities" is like a "must-have". I have installed Debian without "Standard system utilities" and "Desktop Environment" and everything went fine. I'm wondering if I may be missing anything?
View 4 Replies View RelatedIs their a command I could use to do this? It needs to be 32MB (33,554,432 bytes), can be either random data or just a blank file, though random data would be preferable, and well... that's it.
Though also, is their a way I could copy the file in a terminal and it print out the info such as average speed and/or total time it took to complete. I'm trying to fight some bad reviews on this flash drive I bought that performs very well, and since stupid comment vs stupid comment doesn't win anything I need to apparently be the first to actually test this drive throughly.
I have just moved my /home to a 1TB, 2 disk, raid 1 setup (using btrfs). I benchmarked the individual disks using the Gnome Disk Utility, but how do I go about benchmarking, specifically the read speed of the file system?
View 1 Replies View RelatedWhat are best freeware tools available for benchmarking and hardening of the Linux Server?
View 8 Replies View RelatedIs there an all inclusion Ubuntu deb like to N/U?
View 9 Replies View Relatedi want to know how to create .po files with gnu utilities??there are several things which i want to know--
1.how to download gnu utilities?
2.how to use xgettext for extracting the main lines and how this xgettext works??
3.i know that msgmft is used for converting the po to mo but what is this(msgmft)??
Once more I am playing with Linux. First it was Mandrake on an 386/33 box. Then Ubuntu 8.04 on an Athlon 64 box. And now Ubuntu 10.04 on an Athlon 64 Black. In Windows, there are beaucoup utilities, such as disk cleanup, dupe file finder, et cetera. I already know to NOT defrag a Linux HDD. Is there a need for any of the more common Windows disk utilities in Linux? FWIW - If I don't run Norton Utilities, CCleaner, and Glary Utilities regularly in Win7, I endup with gigabytes (yes, gigabytes) of trash files.
View 3 Replies View Related#1. Host Wheezy 7.8 KDE 64 bit
VBox 4.1.18_Debian r78361
Ext.Pack 4.1.18 r78361
Can use a WIN XP appliance (from my old PCLinuxOS) as guest there without any issues.
Added a second guest - Jessie 8.0 KDE 64 bit. Works, but no seamless display, mouse issue ...
So added inside guest:
non-X11 guest utilities + X11 guest utilities from the repositories
(These utilities are meant to be run inside the the virtual machine. They provide closer integration ...)
I simply don't know, how to run those utilities ...
What I get is
Code: Select all# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● virtualbox-guest-utils.service loaded failed failed LSB: VirtualBox Linux Additions
● virtualbox-guest-x11.service loaded failed failed LSB: VirtualBox Linux X11 Additions
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
2 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
#2. Host Jessie 8.0 KDE 64 bit (on a second hdd)
VBox 4.3.18_Debian r96516
Ext.Pack 4.3.26 r98988
VNC 4.3.18 r96516
Same situation as in #1.
How do I run those xxx VBox applications inside guest?
Is there standardization across utilities included with Fedora 14 such as
df
du
top
[code]....
I've loaded it as dual boot with Windows XP & I'm now trying to find equivalents for some Windows utilities. I have found two possible replacements for allway sync but how do I install them? One is Synkron and the other is FreeFileSync both downloadable from sourceforgenet. But they come as packages, one as a tar.gz and one as a zip. What do I do now? In Windows there is an .exe or install file.
View 9 Replies View RelatedI have a system recovery partition on my drive. It's size is 1.4gb. I'm supposed to be able to boot to it but the MBR got rewritten a few times already I think. Maybe GRUB can get me to boot to it.
View 4 Replies View Relatedwhich filesystem usually contains system commands and utilities?
View 4 Replies View RelatedI recently installed ubuntu 9.10. I have been trying to launch utilities and other programs that have .exe extensions by double clicking the .exe file. Each time I attempt this I get the following error message in archive manager:
[Code]...
I'm not very sure when this issue started. Anyway, the system finally boots and I haven't had any further problems, but I somehow notice the booting to be a bit slower since this error appeared and I don't like watching the red letters that say "failed" every time I switch the computer on. I googled this before posting it, and other users have had this issue, but the solutions that worked for them didn't work for me.
This is the content of my /etc/network/interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
1.What character instructd the shell to interpret a special character as an ordinary character?
2.What directory contains some of the utilities available on the system in the form of binary files?
3. What command is used to search the location of a utility?
4. What command is used to instruct the editor to write the file and quit the editor?
5. What key quits the more utility and displays the shell prompt?..........
standard Linux installation utilities split the root file-system and the home file-system on two separate but relatively equal-sized partitions? For example, when I put fedora on an 80GB disk, it automatically gave the root file-system 32GB and home 30GB and the swap 8GB of space. However, since my home file-system has a directory with 28GB of files in it, why is my root file-system reading 100% usage? Is the home FS overlaid on top of the root FS? Is there an advantage to doing this? I just made a boot partition (50mb or so), a root partition (90% of the disk space) and a swap (4%-5% disk space).
View 5 Replies View Relatedwhen i want copy something from dvd my debian squeeze is total slow cpu ussage is 100% and write 2.2 mb/s and musick is stop and play. This same is on burning cd /dvd the device buffer is an about 10-15% this dvd is Pionier 116D on windows xp work perfect. I try benchmark dvd form gnome-disk-utility but i got Error benchmarking: helper exited with exit code 1: Device /dev/sr0 is too slow to benchmark
[Code]....
( everything works on debian lenny on the old kernel 2.6.26 ) I instaling a few kernel and compiling 2.6.35.7 with .config file form ubuntu on finaly didn't help
I have been given Toshiba Tecra S11 with windows 7 running on it to install Ubuntu 10.04. Toshiba has a bunch of utilities running on the machine set up as dev/sda1, dev/sda, dev/sda3 and dev/sda4. I do not know where to start because of these existing partitions.
View 2 Replies View Relatedhave recently encountered an issue in fedora 14 whereby upon entering the root password the users and groups and authentication utilities do not run. (system/administration/users and groups) They used to run fine.
View 6 Replies View RelatedI am making a text search engine. I need to first convert binary documents to text. I want to go with cross-platform (we develop both on windows and linux) command line (so that I can get the output via python subprocess). What are the choices for this?
View 1 Replies View RelatedHow can I uninstall / purge wine and any wine installed windows programs?I've tried deleting .wine (hidden folder)but in /usr/bin/ there are a number of wine related files.And wine sub menu still appears in Applications menu
View 6 Replies View RelatedI went to the Wine HQ website & I did the step by step how to install wine on Ubuntu 9.10. This is the log from the terminal
Code:
warren@ACER-Aspire-9300:~$ sudo add-apt-repository ppa:ubuntu-wine/ppa
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 883E8688397576B6C509DF495A9A06AEF9CB8DB0
gpg: requesting key F9CB8DB0 from hkp server keyserver.ubuntu.com
gpg: key F9CB8DB0: "Launchpad PPA for Ubuntu Wine Team" not changed
gpg: Total number processed: 1 .....
The following packages have unmet dependencies:
wine: Depends: wine1.2 but it is not going to be installed
E: Broken packages
warren@ACER-Aspire-9300:~$
just had to redo my system and am trying to install my programs, yet ubuntu all of a sudden will NOT let me run exe programs in Wine? I needddd my Pokerstars installed, and since when did Ubuntu decide to go all net nanny on us?
Tried changing the permissions of the item and yes, it does say "allow executing file as program", it STILL won't let me, wtfff ... using ubuntu 10.4
how to install Yahoo Messenger without using "Wine" .
View 1 Replies View RelatedIm new in using SUSE. Step By Step installation of wine.) im kinda confuse of the process. tnx
View 9 Replies View Related