Ubuntu :: How To Signal End Of File In C
Aug 16, 2011I've read in multiple places that to signal the end of file in the bash command shell is Ctrl-d, but this does nothing at all for me. here is my code:
[Code].....
ADVERTISEMENT
Ubuntu :: Will Not Display - No Signal
Jan 16, 2010When I start Ubuntu, the Ubuntu logo appears, then the screen goes black and "No Signal" appears on the monitor screen.
Earlier today, I installed a new processor, a dual-channel AMD from a single channel AMD. I decided to put the entire computer into a new case since I was dismantling everything. I have two hard drives: one for Ubuntu and one for Windows XP.
When I started it up, I got errors 13 and 17. I went into the BIOS and changed the disk order. Now Grub appears and I can get into Windows, but I cannot get into Ubuntu.
Ubuntu :: No Signal During Boot
Apr 13, 2010About 50% of the time when I boot my 64 bit Ubuntu 9.10 machine, while Ubuntu is loading, my screen will go black and my monitor tells me it is receiving no signal. From here, I have about a 20% chance of getting signal back if I pound my keyboard to death or turn my monitor off/on multiple times.
View 2 Replies View RelatedUbuntu :: No Signal On Monitor / Get That?
Jan 3, 2011Ok, first off I installed the disc after having to holed select for the language to come up then selected the nomodeset option before installing, then I installed, restarted and got no signal. After that I tried to edit the grub like a thread said by changing splash or whatever to nomodeset and it won't allow me to edit.
View 2 Replies View RelatedUbuntu Networking :: Wifi Signal Very Low
Jan 15, 2010I was running windows vista 32 bit (NOW UBUNTU 9.10) on my custom built pc with a TP-LINK TL-WN353GD wireless pci card, before on vista my wifi signal strength would be in the low 70% range with a speed of 54 Mbps from a access point roughly 250 yards away, now with ubuntu 9.10 signal strength in the 15-20% range with a speed of 1 Mbps. My question is, what is the best way to overcome this wifi signal strength and speed problem, it is a noticable performance disadvatange easily seen on a website like ..... where as before videos would play 95% of the time without having to stop and catch up, would a different wireless pci card be a better choice than what I have, or is the problem in the software as in a driver incompatability or lack of correct driver, not sure how to remedy the problem.
View 4 Replies View RelatedUbuntu :: Wlan Signal Went Down With Upgrade To 9.10?
Apr 23, 2010in my work computer i put ubuntu, i had to install the version8.4 then i had to upgrade one by one to 9.10 because the computer was not able to detect it via a usb live instalation. in my wlan signal when i had 8.4 it had the 4 stripes that mean the signal was like 90% but every time i upgraded the signal became weaker, and now that i upgraded to 9.10 the signal is 14% it takes forever to DL the updates and aplications. and the connection is 2mbps
i have a really old laptop a toshiba sa30-3-3 with 512 in ram and a pentium 4 a3.06ghz.
does anybody have an idea of whats going on and how to get ti fixed.
Ubuntu / Apple :: G4 Cube-ADC No Signal
Jun 22, 2010I have installed Lucid on my G4 Cube and it works fine except that I only get a video signal on the VGA connector. I would like to use my 15" Apple Studio LCD, but cannot get a signal on the ADC connector. If I boot the the original OS 9 CD, it works, so I don't think it is a hardware problem. I have tried creating an xorg.conf file with many different setting - still no signal to the LCD.
View 5 Replies View RelatedUbuntu Networking :: 10.10 Has A Much Lower Signal Than Mac OSX?
Jan 9, 2011I installed 10.04 1st by making a partition with bootcamp on MacOSX.Then I formatted the partition according to Ubuntu's instructions. I didn't install rEFIt, because I prefer to just hit the alt (option) key.I made the necessary adjustments according to URL...Community Ubuntu Documentation - and everything seemed to be working fine.I upgraded to Maverick and everything seemed to be working fine aswell.But then I noticed, that the wireless signal keeps failing and I'm asked to put the password again and again..
I don't think this is due to the upgrade from 10.04 to 10.10, but I just noticed it recently, maybe because of the air humidity, the signal was stronger a few days a go.. don't know!!Is there anything I can do?Perhaps install a new driver, or another wificlient, like Wifi-Radar??
Ubuntu :: Check 3g Signal Strength In 10.04?
Jan 16, 2011I'm using 3g modem(broadband) for connect to the internet. how can I check signal strength in ubuntu 10.04.
View 2 Replies View RelatedUbuntu :: Signal Out Of Range For Karmic Upgrade?
Jan 9, 2010Anyone knows the workaround for Quote: Input Signal Out of Range Change Settings to 1440 x 900 - 60Hz
View 9 Replies View RelatedUbuntu Multimedia :: Getting NVidia ION To Output A 852 X 480 Signal?
Jan 20, 2010On an Asrock ION 330HT-BD box Im running Ubuntu 9.10 (2.6.31-17-generic) with the nVidia driver 185.18.36. The Asrock box uses the nVidia ION chip and the nVidia driver appears to be working without any problems.
My problem is, that I what to use the box as a MythTV frontend with an (old) SD Plasma screen as display, which have a native resolution of 852 x 480 and I cant get the box to output a 852 x 480 signal. The Plasma is connected with a HDMI -> DVI cable. No matter what settings I have tried in the /etc/X11/xorg.conf file, the box keeps outputting a 1024 x 768 (or higher) signal
Questions:
1) Is the nVidia ION chip capable of outputting a 852 x 480 signal?
2) If Yes to above, how do I configure my xorg.conf file?
Ubuntu Networking :: Why Isn't 9.10 Picking Up My Wireless Signal?
Jan 25, 2010I installed WICD because I was looking around the internet and the Ubuntu forums said that it was the best fix for the Network Manager not working. I added the source and installed the package like the Ubuntu site said. I go to Applications => Internet => Wicd Network Manager. It says no wireless networks found. I know that the router is working because my sister is right here next to me playing Maplestory on her laptop! When I do the lshw -C network function in the terminal it is only bringing up two things: the network controller and the ethernet controller. I used Yahoo Answers as my first goto and the answers there said that Linux doesn't have the drivers for the router. I have a Netgear Wireless-N 300 Router WNR2000 and a Dell Inspiron 1750, if that helps. Can someone give me a link to the drivers or tell me in detail what to do?
View 4 Replies View RelatedUbuntu Networking :: Can't Connect To Wireless Signal?
Feb 7, 2010I have Ubuntu 9.10 a dell laptop i am using a tew-644ub usb wireless adaptar and it's seeing signals but wont connect to any my network is unsecured and open. everytime i try it does this swirlly thing then says diconected. im using a diferent computer to post this so if there
View 6 Replies View RelatedUbuntu Networking :: Boost WiFi The Signal?
Feb 9, 2010i'm surrounded by concrete block wall but have found an unlocked wifi signal. but i need to do something to help boost the signal. my HP laptop has a built in wifi card and i'm looking for something that i could use or do to help boost the signal.
View 2 Replies View RelatedUbuntu :: K9Copy Crashed & Caused Signal 11
Mar 14, 2010About 2 weeks ago I upgraded my Ubuntu OS from 8.04 to 8.10 and then to 9.04 with kernel 2.6.28 - 10 - Generic.Today I discovered K9Copy no longer works. When I start K9Copy it comes up ok but if I click on anything in the main window (file, copy, etc.) I get a message that says:A fatal error occured.The application K9Copy crashed and caused the signal 11 (SIGSEGV)
View 2 Replies View RelatedUbuntu :: No Display Signal When Turning Monitor Off And On Again
Sep 13, 2010If I turn off the monitors, I get a black screen (the monitors goes to power save) when I turn them on again.
I have a workaround which involves pressing ctrl-alt and f3 and then ctrl-alt f7. That usually works and brings up the graphical login-screen. And I get my session back.
But sometimes when I log in, my session is gone. It is as if I was logged out or the system has rebooted.
I have two monitors and Nvidia.
Ubuntu :: Monitor Input Signal Out Of Range / Fix It?
Nov 28, 2010I basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.
I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!
I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?
Ubuntu Multimedia :: No Signal From Capture Card?
Dec 2, 2010I have been trying to put together a mythbox for myself. I installed Ubuntu 10.10 and the newest version of the Mythbox backend. My capture card that I am having issues with is a Hauppauge Wintv-HVR-1850 card, I followed the instructions on installation from linuxtv.org and did not get any errors. I tried to set up Mythtv and it didn't get a signal and couldn't find any channels. I would like to know if my card is even working so I tried using xawtv but still could not get a signal from my card.
how I can verify that my card is installed correctly?
Ubuntu Networking :: No Wifi Signal Found
Dec 7, 2010I just installed 10.10 on a Dell Inspiron 1300. The wired connection(eth0) works fine but I get no wireless signal when I unplug and try to connect to my network/internet. It shows that wlan0 does exist but it gets no signal. I've used the rfkill to make sure that it wasn't blocked and everything seems to be ok, except I get no wireless signal.
I uninstalled Network Manager and installed Wcid and it found nothing. I even tried installing several signal scanners I found in the package manager. I've removed, updated and reinstalled the broadcom drivers. I still get nothing. The wireless signal from my router is nonexistent according to Ubuntu.
The wireless works fine when I put my windows XP HD in and it also works fine when I put my Mepix or PCLinux OS HDs in the laptop. So I know that the wireless card is not busted.
Ubuntu Installation :: No Signal Input On Display?
Dec 10, 2010Have a Compaq Presario SR1915AN desktop with a NVIDIA GeForce 6150 LE it has a dual boot of Windows XP and Debian 5.0.6 which would only run in 800x600 mode.I decided to install Ubuntu 10.10 Desktop as this is what is on another different machine, thought it would be safe.The install wouldn't work, I would get the purple selections screen and first time chose the normal graphic mode, 10 seconds or so in to the install the scrren goes dead and i see the "No Signal Input" display show on the screen. Rebooted and selected text mode install, this time it fully installed but on reboot it again has the screen goes dead 10 seconds after you select from the Grub screen.
View 1 Replies View RelatedUbuntu Installation :: 9.10 To 10.04 Lost Video Signal
Feb 19, 2011I had a working box with 9.10 and upgraded via online connection.The machine has NVidia. The download/upgrade passed without mishap.But at reboot the monitor displayed no signal.I did this process twice: install 9.10 got a working system. Upgraded to 10.04 and lost video signal.Black screen.
View 2 Replies View RelatedUbuntu Networking :: Turn Off Notification Of Low Signal Gsm In KDE?
Apr 15, 2011How do I disable the notice about the low level signal gsm in KDE. Appear almost every second.
View 1 Replies View RelatedUbuntu Multimedia :: 11.04 - Signal Out Of Range On Boot Up
Jul 17, 2011I installed edubuntu 11.04 a couple months ago on the kids computer. Everytime we would boot up, we received the signal out of range during the entire boot sequence. However once the login screen showed up, we could see the desktop fine. However, now it will not display anything from the time grub loads it is just Signal out of range. I even let it sit for about 10 minutes. I can boot from the live cd fine...but I'm not sure what to change. How can I fix this issue from the live cd?
View 6 Replies View RelatedUbuntu :: Installing 8.04 (32 Bit And 64 Bit) / Monitor Stops Getting Signal?
Jan 5, 2010I am facing weired problem while installing Ubuntu 8.04 on my desktop
specification of it
Intel Core 2 duo 2.93
4 GB RAM
500 GB HDD
Intel Motherboard DG41 RQ
it goes on loading ubuntu and then after when i am suppose to get my home screen with bird background to view, monitor stops getting signal.
i tried both 32 bit and 64 bit
ubuntu-8.04.3-desktop-amd64.iso
ubuntu-8.04.3-desktop-i386.iso
but no luck where as 9.10 works like a charm and i have no issue in working with it.
but because of some external H/W drievrs i need to stick to old karnel version which supports 2.6.30 or lower
Ubuntu :: Karmic Upgrade Now No Signal To Display
Mar 2, 2010I recently upgraded from 9.04 to 9.10 on an IBM Intellistation Z Pro (64-bit).Install went smoothly.Upon restart, everything works fine up until the log-in screen. The normal hardware checks all run and the new white Ubuntu symbol appears but when it switches to the log-in screen, a "No signal" message appears on the display and the green power light goes orange.
I can still log-in remotely from another machine and access all the files and drives, run jobs etc., so the machine did start-up properly, it is just an issue with the display.
Ubuntu Multimedia :: Skype Don't Get Internal Micro Signal?
Jan 15, 2010Integrated microphone doesn't work with skype, whereas an external one works. The integrated microphone works with "sound recorder" and audacity, pulseaudio input monitor gives its signal but pulseaudio settings don't
Audio: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
My is a Packard Bell netbook
CPU Atom N270 @1.6GHz, 1GB RAM, 160GB HD
O.S. Ubuntu Karmic Koala 9.10
Ubuntu Networking :: Can't Pick Up Home Wireless Signal?
Mar 15, 2010For the past few months I've been using Ultimate Edition 2.3 on my laptop. Various problems I encountered convinced me to switch. I installed Ubuntu 9.10 today and after the install I can't pick up my wireless router on the list of available networks. I'm able to pick up every other one on my block, just not my own. My server and my roommates laptop can pick it up and are connected to it, the problem seems to be exclusive to this laptop with the fresh install on it.I tried the 'connect to hidden network' option and it doesn't connect, it just keeps asking for the psk
View 5 Replies View RelatedUbuntu Networking :: Cannot Hold A Connection With Any Wireless Signal ?
Apr 3, 2010For some reason my laptop cannot keep a connection with any wireless signal. I have tried several networks and resetting the router and it just doesnt work. Im not sure why...i have selected to connect to a certain network and it either takes forever to finally connect or doesnt connect at all. also when it does connect it only last a few minutes, meanwhile using win7 i have no issues with the connection.
View 2 Replies View RelatedUbuntu Networking :: No Wireless Signal Detected / Sort It?
May 15, 2010I just installed the latest version of Linux on my Dell Mini 910 and it's now not picking up my wireless signal. The wireless card is enabled so I'm not sure what's going on. Btw, I tried entering the smb command that was given to the other member about 4 threads down as he had the same issue. Didn't work though.
View 9 Replies View RelatedUbuntu Installation :: Monitor Gives No Signal Message During Install
May 23, 2010So my computer works reasonably fast running XP (old 3GHz processor with 512RAM), but every so often it simply freezes. I've tried all I can to fix this, but sometimes when I boot up XP it'll get to the window's logo then freeze, sometimes it'll get all the way to the desktop and then freeze, and sometimes it'll start up, run fine for an hour or two then freeze. By freeze, I mean the screen doesn't update, the keyboard and mouse do nothing. Updating NVIDIA drivers doesn't seem to help - some make it worse! So I've had enough, and decided to download Wubi to try Ubuntu on it. I'm not ready to remove windows just yet (lots of data on this machine) and so I don't really want to try dual-booting yet.
Wubi downloads and runs in Windows fine. When I go to restart, after picking Ubuntu from the menu it shows a little text (I think about installation, and press Esc for menu) then my monitor gives a "No Signal" message. So I try restarting (pressing the button), and pressing Esc to bring up the menu. I tried all 5ish options, and "Safe graphics mode" and "ACPI workarounds" seem to last longer, but the same error occurs, before it has even prompted me (still doing its own thing). So I can get up to GRUB, and even get into the grub> prompt. I tried adding irqpoll and/or all_generic_ide to the boot thing (pressing e in the grub menu), but that hasn't helped. I'm unsure of how to find what hardware my computer has (only computer, don't have receipt), but I know "NVIDIA GeForce 6600 GT".