Ubuntu :: How To Enable Wireless On Toshiba Tecra A9
Apr 18, 2010I have a question on how to enable wireless on a toshiba tecra A9.
View 2 RepliesI have a question on how to enable wireless on a toshiba tecra A9.
View 2 RepliesI am using TOSHIBA Tecra A8 notebook and i have install Ubuntu 10.04. However sound is not working. Is there any sound drivers for TOSHIBA Tecra A8 and it's version is : PTA83E-01D023AR.
View 9 Replies View RelatedI have a Toshiba Tecra M3 laptop with a resolution of 1024 X 768 and a Nvidia GeForce Go 6600 TE/6200 TE graphics adapter build in, on to which I want to add an external Dell E196FP monitor with a resolution of 1280 X 1024 pixels. I have installed the Nvidia VIDIA UNIX x86 Kernel Module 173.14.22 driver and X server application, but when I go in to the application by "System" -> "Monitors" I get the following message: "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?", to which I answer yes.
In here, I go to "X Server display configuration", and "Detect displays". Here both displays (the Dell and the build-in Toshiba) is shown, but I do not know what setting to chose under "Configure", where I have 3 options:Disabled Separate X screen TwinView I want the same screen image on both displays - almost like a projector, but I can for the life of me not get it to work.
Not new to CentOS, which I've installed on a few servers. I'm trying to turn a very old laptop (11 years ?), Toshiba Tecra 540cdt (with the latest available BIOS), into a home server. It runs Windows 2000 fine, and was earlier running some Mandriva versions. I'm trying a multi-boot install, from CD1of6. It does boot from the CD, then shows:
boot:
Loading vmlinuz...
Loading initrd.img...
then reboots, and goes through the same cycle.
I switched the hard disk, same result. I have problems too if I try to install the latest Knoppix. An older Knoppix, 5.1 with kernel 2.6.19, will boot.
It feels like it is a keyboard problem because the symptoms always show after pressing a key.
In most instances, a line I am typing in "gedit" at the correct place in the text is unexpectedly continued a few lines downward even though no arrow key has been pressed. In another instance, I click "new thread" in Linuxquestions, a new window opens asking for a title, after entering the title I click "Click Here to Find Similar Threads", a new smaller window opens on top of the existing one and shows the existing options but as soon as I select (click on) one of these options, the main Linuxquestions window disappears and there is no option of "going back" to it and no "back" button to click.
If the keyboard needs cleaning, how do I do that? I found a few cleaning hints about separate keyboards but nothing about laptops.
I have a problem with Thunderbird 3 on Ubuntu 10.04. When starting TB3 the 'mail account setup' box appears but can't type anything inthere... I can close the setup box... the main window is very unresponsive but cosing works also immediately. I fisrst did upgrade from 9.10 to 10.04 having the problem. Thinking the upgrade might have gone wrong I did a complete fresh install on that laptop, even verified the CD with md5sum before installing. After the fresh and clean install the problem remains the same.
The machine having the problem is a Toshiba laptop Tecra S1 with 1GB of RAM. I do not experience any other problem with Ubuntu 10.04 on that machine, everything else runs like a charm, there also was no error during installation... I think this problem is related to the Toshiba Tecra S1 laptop because other machines I own don't have problems with TB3.
I installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.
Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is 2.6.35.10-74.fc14.x86_64 and my graphic card worked fine with hardware acceleration out of the box.
[Code]...
I've been trying to get it to work on my laptop off and on for several years now, experimenting first with Redhat (version 6.1, I think) and now trying with Ubuntu 9.04. I've done a full install using the entire hard drive (no dual boot). So I'm trying it for real this time. I'm having a problem with my video drivers. The video is ok (not great) and I don't seem to have any options to adjust it.
When I go into system > preferences > display, I see monitor "unknown", set at 1024x768 with a 75 Hz refresh. If I click on "detect monitors" nothing happens. It says under system > administration > hardware drivers that "no proprietary drivers are in use on this system". I've got two options:
[code]...
For the first part of boot, I have access, but then when it comes up into Ubuntu, the big monitor (a Dell 2500, I think, plugged into the stock Toshiba docking station via DVI) quits working, and all I have is a dim picture (dark, like something's sapping power from it) on the laptop display.....
I have just installed Ubuntu 11.04 on my brother's Toshiba Satellite Pro L500 and have spent all day trying to get the wireless to work.
the laptop does not have a physical wifi-switch (it should switch on-off with Fn+F8, which doesn't work), the drivers seem to be installed, but I cannot 'enable wireless', and I found that it is 'Hard blocked':
sudo rfkill list all :
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
but 'rfkill unblock all' does nothing.
[Code].....
I went through several posts for making the Toshiba wireless working. None of them seemed to work. The Fn+F8 key is also not working, as with many other ppl here is output for sudo lshw -C network
Code:
neeraj@ubuntu:~$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: RTL8188CE 802.11b/g/n WiFi Adapter
[Code]....
I don't know if i have to install drivers or a software, when using iwconfig it says "no wireless extensions"
the device is atheros AR9285
how to enable sound on Ubuntu. I have installed the latest version of ALSA and output:
Code:
[URL]
lspci -v
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Toshiba America Info Systems Device fdd0
Flags: bus master, slow devsel, latency 64, IRQ 16
[code]....
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
i installed open suse kde on the laptop toshiba l450 and i believe i need to download the wireless driver for it but what driver is this and where is it i would prefer a one click install
View 5 Replies View Relatedget the wireless working on my mum's laptop as having to plug it into the router everytime she wants to go online is now becoming an issue for her. I recently upgraded it from 8.04 to 9.04. Ive tried using the Windows Wireless Driver option in System - Admin but to no avail.
Laptop Toshiba Satellite L300D-13D
$ lspci, returns the following
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
[Code]...
getting the wireless chipset (Realtek 8176) to work, but finally got the WLAN to show up. Now, it seems as though it will recognize my WLAN and SSID, ask for my WPA password, but never connect. I connect fine over wired ethernet. It will not connect wirelessly to an unsecured network either. I previously had Jolicloud installed on my netbook, and my wireless worked out of the box with no setup, but I really didn't like the lack of application support with Jolicloud. I ended up in dependency hell just trying to update Banshee for use with my iPod.
1 ) Machine Brand and Model (PC/Laptop):
Toshiba NB505-500BL
2 ) Wireless Brand, Model and Wireless Chipset:
07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8176] (rev 01)
3 ) check interface:
anthony@NB505:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 1c:75:08:72:1c:ce
inet addr:192.168.1.70 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1e75:8ff:fe72:1cce/64 Scope:Link
[code]....
I recently bought a Toshiba Portege R835 and wanted to install Ubuntu on it. I wasn't too surprised that the wireless wasn't working, but what does bother me is that Ubuntu doesn't even recognize that I have a wireless card. I haven't installed Ubuntu you (10.04) because of this, however I am able to get online through a wired connection.
View 3 Replies View RelatedMy wireless is not working in Ubuntu 9.10. In the connection area wireless is not an option, I cant even see wireless networks. I read some posts at [URL].. but the solutions do not work for me.Below is some more information lspci:
Code:
00:00.0 Host bridge: Intel Corporation Arrandale DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Arrandale Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
[Code]...
I've been having a lot of trouble connecting to my Wireless Router. It worked fine when I had XP on it, so it's not the actual inbuilt WLAN. I put in the correct password, it's MAC address is registered on the router, yet it will constantly query me for a password despite it being put in correctly. I've tried searching the forums for any similar issues, and their concurrent fixes.
View 2 Replies View RelatedI have a toshiba a15 s127. it didn't have a wireless card so i ordered one and installed it myself. however, my computer is not seeing the wireless card and i don't know what driver i need because the card itself didn't come to me in a box, so i am not sure what brand it is. All i know is that it is an original part.
On another note, when i go to network settings and try to config my wireless settings, i do not know what number to put in the BSSID field. (thinking i use the wireless card's MAC address, but ?) and don't know if i use the wireless card's MAC adress or the wireless router's MAC address or the Modem's MAC address in the actual field for the MAC address. ( i know, i know, i sound totally clueless--well, i am!) {note: the wired network works fine.}
How do i get my computer to see the wireless card and how do i configure my computer once it does see the card?
After hours of searching and trying different methods I am still unable to get my wireless going.. I have tried the PPA method from Chilli and looked through craneman's thread. I have installed the proper realtek driver and done modprobe for the device to no avail. In Additional drivers nothing shows except for my ATI drivers.
dnkbd@losnix:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:33:bd:d5:10
inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:33ff:febd:d510/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I have my laptop dual booted between Ubuntu 9.10 and Windows 7. In Ubuntu I randomly lose connection to the wireless network. It always works fine when I first boot into Ubuntu but after a while my wireless connection will go down. The signal strength meter will go to zero bars and the black popup message will appear that my wireless connection has disconnected. At first, if I just wait a bit, the connection will come back. However, after about 4 or 5 times of doing this it will then ask me for my password, and inputting the password does not reconnect me to the AP. I am finally forced to reboot. Then it works OK for a while again and the cycle repeats.
It works fine in Windows7 all day, every day. I have the Release Candidate of Windows7 so it's going to expire soon. I would really prefer to make Ubuntu my everyday OS on this laptop rather than pay for a Windows7 license but I cannot tolerate a flaky wireless connection.
I had 8.1 on this laptop at one point and I never had any problems with the wireless then, that I can remember. I had no Ubuntu for a while but then I came back with the 9.1 and was loving it until the wireless problem reared it's ugly head.
Wireless found by lspci: 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
I cant seem to understand what happens to my wifi networking, i just installed ubuntu 10.10 today (completely erasing windows) on my toshiba satellite m645. Seems like my wireless card (the specs say its intel 802.11a/g/n wireless LAN) will only randomly detect the available networks or will connect only for a few seconds just after i just turned it on, then it will disconnect.
View 2 Replies View RelatedI found a few fixes which I tried to use, to no sucess. updating drivers, turning router on/off, turning wireless switch on/off, various other fixes from ubuntuforums. tried to upgrade to Natty Narwhale to see if the problem worked it's way out, to no avail. I've spent two days trying for this. Anyone out there willing to point me in the right direction or hold my hand?
View 7 Replies View RelatedToshiba Satellite 1905-S303
Ubuntu 11.04
2.6.38-8-generic i686 Kernel
The Network card sees the Wireless network, but will not connect to the router. I have tried with and without security, and neither setting makes any difference. Using the Wired Network adapter does work when set to a STATIC IP.
F13: wireless is disabled - running lspci shows a realtek ethernet 8101/8102 - the wired ethernet works fine but not the wireless. Have searched google but they say the realtek drivers should be in the kernel since 2008.are there other commands that can be typed to try to enable the wireless ?
View 5 Replies View RelatedI am using a Toshiba Satelllite L670 laptop and I can not get the built in wireless card to work....using F14.
View 3 Replies View RelatedI recently installed FC11 on my Toshiba L500 laptop. After installtion linux is not detecting wireless adaptor. I believe toshiba L500 has realtek RTL8191SE CAN 802.11n PCI-E NIC adaptor.
View 10 Replies View RelatedI am a linux newbie trying to get the wifi setup on my Toshiba Portege R835. It is running an Intel WiMAX/Wifi Link 6050 Series (rev 5f) wifi card, and I am running ubuntu 10.04. From the ui under wireless networks it says "device not ready"
I tried running ifconfig and it only shows lo, but if I do ifconfig -a it shows me a wireless card listed under wlan0. I tried running sudo ifconfig wlan0 up But it gave me an error: SIOCSIFFLAGS: No such file or directory I also looked in lib/firmware and do in fact have iwlwifi-6050-5.ucode listed in there. Unfortunately, I am really not sure how to attack the problem from here.
I should also mention that the wired connections also do not work, so anything I need to download has to be downloaded from a windows boot and burned to a CD to transfer (making the problem much more difficult to solve!)
I'm in a hurry to get the wireless to work on my Toshiba A205. Link to system data: [URL]. Didn't have to use anything like ndiswrapper on ubuntu, so thinking its an easy todo here - just need a little prod or two in right direction. In the meantime I'll take a look at the data myself and see if I ain't smarter than I think.
View 8 Replies View Related