I recently installed FC11 on my Toshiba L500 laptop. After installtion linux is not detecting wireless adaptor. I believe toshiba L500 has realtek RTL8191SE CAN 802.11n PCI-E NIC adaptor.
View 10 RepliesI have a toshiba Laptop, Freshly Installed ubuntu 11.04 formated HHD, and while everything was goin so well i came across when i wanted to chat wid friend on cam...but it say no cam detected... apps triedCheeses. cam not detectedSkype no responce... nothing happensi tried googlein it but all i found was dead ends...
lsusb:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I have just installed Ubuntu 11.04 on my brother's Toshiba Satellite Pro L500 and have spent all day trying to get the wireless to work.
the laptop does not have a physical wifi-switch (it should switch on-off with Fn+F8, which doesn't work), the drivers seem to be installed, but I cannot 'enable wireless', and I found that it is 'Hard blocked':
sudo rfkill list all :
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
but 'rfkill unblock all' does nothing.
[Code].....
I have been searching the web for a solution to a couple of problemsm having with hardware, I am Unable to get the fan or wireless working on my Toshiba U505 S2950 Laptop. I am new to using OpenSuse but I have used Ubuntu and other distros. I have not been able to solve these issues yet and I have tried several things that I have found on various forums
View 8 Replies View Relatedget the wireless working on my mum's laptop as having to plug it into the router everytime she wants to go online is now becoming an issue for her. I recently upgraded it from 8.04 to 9.04. Ive tried using the Windows Wireless Driver option in System - Admin but to no avail.
Laptop Toshiba Satellite L300D-13D
$ lspci, returns the following
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
[Code]...
I did a clean install of Fedora 13 on my Toshiba A500 laptop. Suddenly the keypad stops working. no numbers?
View 2 Replies View RelatedCapitols v and m not working properly! Toshiba laptop. So far I'm v happy with Ubuntu, works really well! However, I have a madening problem: when typing I cannot use the right hand Shift key with either or if I do, the v looks like $V, and the capitol m ends up giving me a pulldown menu. I assume this is not common to Ubuntu, but maybe it is?
View 5 Replies View RelatedI have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
View 11 Replies View RelatedI have a Toshiba Satellite A660 laptop with Ubuntu 10.04. I am sure that the internal microphone works because when I reboot into Windows it works fine. It does not work in Ubuntu instead. I tried three things:
1) Action: I checked all the volumes, made sure that the microphone is not muted and selected the proper device as "Analog Stereo Duplex".
Result: no improvements.
2) Action: I installed PulseAudio to better manage the volumes.
Result: no improvements.
3) Action: in the Terminal, I executed the line " sudo gedit /etc/modprobe.d/alsa-base.conf " and then added the line " options snd-hda-intel model=toshiba " at the bottom of the page that opened. I saved, closed and rebooted.
Result: no improvements.
I executed in the Terminal the command " wget [URL]. The link to where data were uploaded is [URL].
So, help me through getting my audio working properly on my Toshiba Satellite A105-S2081 Laptop. I think I've been through most of the help messages and tried many things to get it working correctly. The ONLY thing that has helped is to go to /etc/modprobe.d/alsa-base.conf and change model=auto to model=generic. (options snd-hda-intel power_save=10 power_save_controller=N model=generic)
I've tried model=toshiba, model=auto, model=lenovo, model=3stack, model=dallas and the laptops internal sound device disappears from the list of sound devices. If I plug in my Logitech Headset, it seems to work fine.It also seems to work fine if I boot it up into XP SP3.It does work now generally with model=generic, but not sure that everything works properly, like the headset & microphone jack. (Actually the reason I have the Logitech Headset is because the headset jack doesn't work).
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI have Lenovo G550 and openSUSE 11.4. Everything's ok, wifi without problems, I could connect to anywhere I wanted to, but yesterday while laptop was running and was connected actually by wire to internet, after removing the wire I realized that I cannot connect to wifi (the laptop was hibernated during night) - even the light diode in the front of the laptop was not shining. I went to yast and realized that the wlan0 isn't enabled and there's new eth1 port. But the wlan by ifup I cannot start and the eth1 I cannot start as well.
View 4 Replies View Relatednew Compaq 510 laptop in which we installed Ubuntu 10.04. When Wireless is switched on it shows the available networks but won't connect. It connected on a few occasions but still we can't browse. The proxy settings are correct.Will installing wireless drivers help? If so, where can we find them?
View 1 Replies View RelatedOk I am a complete Noob when it comes to anything other than a windows based unit, so please be patient with me. I am able to connect to the Internet using a wired connection.
View 6 Replies View RelatedI'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
View 6 Replies View RelatedI've installed CENTOS 5.3 on my laptop, on dual boot with windows xp. The problem is that my wireless network manager doesn't find any networks. Another laptop with fedora 10 installed finds the network, so the problem is not the network. I guess it's a problem with the wireless driver / firmware, as i had this problem on fedora some time ago, and i've solved installing the firmware. Now i've installed the firmware, i rebooted, and it still doesn't find any network.
View 1 Replies View RelatedI'm using a Toshiba Satellite A200-21T LapTop with Ubuntu 9.10
I used to have dual boot with windows Xp but i shoot windows out (Sorry bill )
In windows i was able to use bluetooth with my nokia phone.
The wireless hardware button in the laptop is on. There is no option it the bios to turn off the bluetooth, so i'm sure that the machine is booting with bluetooth on.
i run this command in terminal:
Code:
ruival@ruimadlinux:~$ cat /var/log/dmesg | grep Blue*
[ 0.380007] Bluetooth: Core ver 2.15
[ 0.380012] Bluetooth: HCI device and connection manager initialized
[ 0.380014] Bluetooth: HCI socket layer initialized
[Code]....
New user to Linux. I installed Ubuntu 10.04 LTS to a mini-laptop, but the built-in wireless card/chip is not working. It worked under the previous OS, XP. There is a switch on the case frame that enables it, but the active light did not turn on during installation. I installed a second time and manually flicked the switch every one second to see if it needed human intervention, but to no avail.
My next step was to try to update Ubuntu to see if it would help, so I inserted a Belkin USB wireless, but the connection was intermittent at best. I believe the device is faulty. A wired connection is impossible as I am sharing with my neighbor. What should I do to help Ubuntu the internal wireless device?
Here is the output of lshw code...
CPU fan apparently is not working with Debian (or Kernel, I don't know who's responsible for ACPI devices management. ).After setting up lm-sensors to show core temperatures, and running a simple "while(true);" C program, I noticed the fan doesn't turn on until the temperature reaches 80 degrees Celsius, and when it does, it runs at what appears to be full speed (VERY noisy). Also, it stays turned on at that speed even after temperature gets below 35 degrees Celsius. The only way to turn it off is to put the computer to sleep and wake it up again, but if I do the same procedure, it happens again.
I think it is related to some compatibility problem with ACPI devices because when I turn on the computer, I can't get the Fn keys to work, but after I suspend and wake it up, I can control the brightness using the Fn key and use the Play, Pause, etc. buttons. I read this has something to do with ACPI issues, the same as the fan control issues, because "try to suspend and wake up the computer" is something people usually tell to others with this problem (I assume just to confirm the diagnostic).Everything works fine on the pre-installed Windows Vista that came with the computer. It's definitely a compatibility problem.
I've read a lot in forums, even here, but I couldn't get any solution for this. I installed toshset but asks me to enable a Kernel module which I have no idea of how to load. I have no idea of how to load a Kernel module in fact.Also, I didn't want to believe, but I read there's no solution for this (at least, not one which doesn't involve a lot of knowledge on the matter).I'd like to stay with Debian, so I'm doing my last try here before installing other Linux Distro. I hope this problem is about Debian and not all Linux distros.My laptop is a Toshiba Satellite L355, Intel Pentium Dual Core T3200. I bought it in the end of 2008, so it's kind of old.
The sound on my system is really low. I am using a Toshiba Tecra M3 laptop with Intel sound.
Here is my uname info:
Code:
2.6.32.9-67.fc12.i686 #1 SMP Sat Feb 27 10:00:02 UTC 2010 i686 i686 i386 GNU/Linux
I tested both Rhythmbox and Gnome Mplayer. Both are low when using headphones and very low when using the laptop speakers. I checked the alsa configuration via alsamixer -c0 and everything looks good. I have attached my alsa-info.txt file.
I feel I am really really close at getting this connected.
The native ath9k driver did not work. I blacklisted this driver and then proceeded to load a windows driver that came with the card through ndiswrapper.
The system sees my wireless router but I could not get connected to the router. I get the circle of death of it trying to connect though.
I then replaced the Network Manager with Wicd.
I try and connect, after setting the preshared key, and it stops at the very end saying it could not obtain an IP address.
I then try to set a static IP, and at the very end it comes back with, "could not contact wireless access point".
I feel I am so close to getting this connected I just don't know if it is a setting on my router I need to change or to look for a different driver. Driver should be fine but I'm no expert.
I have two other computers wireless'ly connected to this router currently and one of them is connected via a dual boot, Ubuntu and Win7, so at the very least these two computers don't have any issues connecting to the router.
Or I am just going to live with WinXP installed on it instead. BTW: I had no problems getting a wireless connection from this laptop when I had WinXP installed, but I have since wiped it off with a clean install of Ubuntu 9.10. Goes to show how much I want to rid myself of Windows on the laptop.
I even installed 8.04 to see if I could make a connection with that version but to no avail I could not. I have since reloaded 9.10.
I have a Toshiba Satellite A660-056 which works beautifully except that the built in mic and the headphone jack don't work. For the microphone, no input device is listed in the Sound Preferences control panel. When I plug in headphones, the built-in speakers go quiet but nothing goes through the headphones.
Here's the info
Code:
uname -a
Linux satelliteoflove 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 i686 GNU/Linux
Code:
sudo lshw -C sound
*-multimedia
description: Audio device
product: High Definition Audio Controller
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: irq:16 memory:b3000000-b3003fff .....
I have a 6 month old Acer (sorry not Asus as per the heading) Aspire laptop. I downloaded Ubuntu and cannot connect via wireless. It works fine via ethernet. Having spent several hour reading this forum, other web pages and the help file, I actually still have not got a clue either as to what the actual problem is or how to begin solving it. Is there a simple answer? If not, I'll go back to windows 7 as Ubuntu seems anything but the promises made.
View 1 Replies View RelatedWireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
Just resently I managed to activate internal bluetooth adapter. I'm not expert in command line and everything I could was done in GNOME. Same like most other systems an icon appears in panel bar whenever I used to type <modprobe omnibook ectype=14>. It took me some time to set everything with the kind help from URL... So the thing is that after fingering with some newly installed packages concerning b-tooth utilities that icon is gone and b-tooth is not active.
View 2 Replies View RelatedRunning OpenSuse 11.2 from live dvd. When it starts up, the screen gets filled with vertical green and black lines, with about a 1 inch square in the middle that moves as the cursor. Nothing else is visible.I've tried each of the video options, with the same result. Is there any solution to this?
View 1 Replies View Relatedi want to buy a laptop and stuck between choosing a Dell or Toshiba. Which brand it more reliable and last longer(as in how many years) from your experience or knowledge?
View 9 Replies View RelatedI have recently installed Ubuntu on my Toshiba Satellite A25-S207 Laptop. Everything runs great except that the resolution will not go above 800x600. I had this problem before on the same laptop and was able to fix it but cannot find the fix now (I had to wipe my laptop clean in order to remove some pesky Windows partitions and reinstall Ubuntu) I have found several "fixes" but none work. I tried the one below as well as it applies almost perfectly to my problem
"I just installed the latest ubuntu 10.04 on a Toshiba-Tecra having "Trident Microsystems Cyberblade XP4m32" Monitor. After install resolution is defaulted to 800x600. I followed a method advised in some threads (arount xrandr and cvt) to increase the size (my laptop works with 1024x768 under XP). This was done OK and I obtained the resolution 1024X768 appearing in the drop list resolution options of the Monitor preferences but when I select the option if fails. Alternatively, when I execute $ xrandr --output default --mode 1024x768_60.00 i got the message "xrandr : screen cannot be larger than 800x600 (desired size 1024X76
I also saw a possible fix proposing to add "HorizSync 31.50-48.00" in Xorg.conf but I then I DO NOT have such a file in my /etc/x11/ after ubuntu install (supposing that this will fix my problem !!!)
Boot into recovery mode, when you get to the command line type:
sudo Xorg -configurewhich will create a default /etc/X11/xorg.conf file. Add the lines:
HorizSync 31.0 - 70.0
VertRefresh 40.0 - 75.0to the Monitor section then reboot."
However when I entered the "sudo Xorg -configure" line my computer spit back saying that "sudo" is not an acceptable command
My Toshiba A300 laptop turns itself on after about 4 minutes from the shutdown. This doesn't happen with Win7. When it turns on, I shutdown using the power off button and it doesn't turn on again. I disabled all the wake options in the BIOS, also I uninstalled the ACPI, but this did not help. I also disabled the WOL in Ubuntu with "sudo ethtool -s eth0 wol d" before the shutdown, but this didn't helped too.
View 8 Replies View RelatedI had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?