I have had win 7 and xp installed but since I didn't use xp I wanted to remove that partition in order to clean up my partitions. This caused the computer to stop from booting into windows and it displayed the "bootmgr is missing" messege. So now I can only boot into ubuntu 10.10 and i need windows since I'm a musician and ubuntu doesn't support my soundcard.
I've been searching the forum to try and get help with my problem but nothing has worked.
This is the output from boot info script, I have added the windows7 entry in grub but it doesn't work.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for (,msdos5)/boot/grub.
I am interested in running Ubuntu side-by-side with my windows 7. It appears that the Ubuntu 11.04 installer does most of the work for me as partitioning according to:[URL] but the only thing it says that I would be having to do myself is changing the code on my MBR to point to the GRUB2. I am not afraid of command prompts, but would like some hand holding as I don't wwant to guess and check when dealing with MBR.
1. Is there any way to share documents between my Ubuntu partition and Windows partition? Or some way to make it so documents and non OS specific files are accessible by both OSs?
2. Is it recommended to let Ubuntu do the partitioning for me? Or is there something to be gained by partitioning myself?
I'm working directly in an Ubuntu Virtual Machine (VM). Some updates (like kernel) were available at the update manager.If I weren't using a VM, I wouldn't update it since it's a risk to break something. Since it's a VM, you can create a Snapshot or export an appliance and restore if something goes wrong.Suppose I'm not using a VM with a Debian/Ubuntu installation. Is there a install-restore approach that doesn't depend in a VM configuration to restore your system exactly before an upgrade (Like a "Restore Point" in Windows), being easy to restore like a VM appliance?
I recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66
I have a windows 7 (64bit sadly) desktop computer with no wireless capability. Now before I go out and spend money on a wireless usb thing, I was wondering if I could use my laptop (Ibm think pad T60 running ubuntu 10.10 dual boot with crunch bang) As a wireless access-point and connect via Ethernet cable the laptop to the desktop (Probably through a modem?) so I can use the Internet for games on the desktop computer. (Games that wont work in wine, sigh). Just a note though, 64 bit windows 7 will NOT run anything.
I was wondering if there is any way to SSH from one computer to another and completely bypass a router or any other network infrastructure. The reason I ask is because my robot ( same one in this post ) often needs to change which wireless network it automatically connects to, however it is getting annoying to have to drag out a monitor and plug it in along with a keyboard and mouse every time this needs to happen. Instead I'd much rather just plug my laptop into the other computer, SSH in and change the network myself.
So I thought I would ask you kind people if this is possible. The robot's computer has unused ethernet and USB ports, and I'd like to use those if at all possible (and with linux, anything is possible! -- sorta). I thought about doing something with ad-hoc, but this would limit my range (in infrastructure mode I can control the thing anywhere there is internet), and is to be avoided.
This one has been driving me nuts for some days now:My Gentoo box which is acting as an internet gateway has two point-to-point interfaces, ppp0 (PPPoE to my ISP) and ppp1 (PPTP VPN link to IPREDator). Packets from my local network are just routed through ppp0 and now the fun part starts: I want to MARK (netfilter...) all packets originating from one specific user on that box in order to use another routing table that will contain a default route via the ppp1 interface.Marking seems to work fine as does the second routing table. But quite mysteriously (at least for me), the packets sent out on ppp1 contain the wrong source IP address, namely the address associated with ppp0.So here is what ifconfig and friends tell me:Network interfaces:
Code: # ifconfig ppp0 ppp0 Protokoll:Punkt-zu-Punkt Verbindung
Using SUSE 11 with Gnome. I mounted a CIFS share from a Windows server as /mnt/win. With the file browser, I can browse to file system/mnt/win and then the files and folders of the Windows share come up fine and I can open them. When I use the file browser to browse to network, the server hosting this share is listed. Then I browse to that server and it lists no shares (nothing at all). I can't go any further than the server. Is there a separate authentication necessary for the file browser to see this share from the network place?
using Ubuntu file browser, I browsed my Windows network and logged on to a Windows PC. Now Ubuntu file browser shows me "C$ on WinPC" as a folder. I can open it, read/write files, etc.But from bash prompt, I don't see anything of type CIFS/SMBFS listed in the output of "mount". Only the usual suspects (like local CDROM). How can refer to Windows files from Linux commandline?
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order: sda1: Windows 7 (can't boot into) sda8: ubuntu (gets erased) sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen. Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is: Disk 1: Solid-State: Boot Partition SL6 LVM1: Root Partition Disk 2: Hard Drive: SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root) Disk 3: Hard Drive: Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
When i turn on my laptop the dell logo comes up, and then it goes to the Windows black "grub" (i have ubuntu and 7), if i click on "Windows 7" it starts, but if i click on "Ubuntu 11.04" it goes to the nice and purple grub that we all know, and i also have two options: Ubuntu or windows. It seems stupid and pointless to have 2 grubs.Is there any way to uninstall Window's black grub so the computer will go direct to Ubuntu's purple grub?
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
i installed Ubuntu Lucid on a partition on my machine which was formerly running windows XP on another partition. after a successfull installation, it happens i ubuntu loads at boot up without showing me GRUB to select my preferred partition or OS.
i have checked for menu.lst to set GRUB to load windows XP but i cant discover it only to read that Lucid uses GRUB 2 with different configurations.
