General :: Can Browse Files Via Windows Mount Point But Not Through The Server/share
Aug 20, 2009
Using SUSE 11 with Gnome. I mounted a CIFS share from a Windows server as /mnt/win. With the file browser, I can browse to file system/mnt/win and then the files and folders of the Windows share come up fine and I can open them. When I use the file browser to browse to network, the server hosting this share is listed. Then I browse to that server and it lists no shares (nothing at all). I can't go any further than the server. Is there a separate authentication necessary for the file browser to see this share from the network place?
View 2 Replies
ADVERTISEMENT
Jun 18, 2009
I've been trying for a while mounting a EMC NAS share on linux. As far as I know the NAS share behaves just like a regular windows share, so the mount process should be very similar. On the NAS server, the disc "Disc1" is shared, and I need to mount a sub-subfolder of that share. This is my line in /etc/fstab:
Code:
//windows_box/Disc1$/folder1/subfolder /var/tmp/mount_test cifs defaults,acl,soft,uid=srvadm,gid=adm,umask=0027,file_mode=0600,dir_mode=0700,credentials=/root/cred.txt,sec=ntlmv2 0 0
When mounting the share, this is what happens:
Code:
[root@server1 tmp]# ll
total 8
drwxr-xr-x 2 root root 4096 Jun 18 10:39 mount_test
[code]....
In the console (i.e. bash), the "mount_test" word on the last line has a red background. When I issue "umount mount_test", everything is back to normal.
View 13 Replies
View Related
Feb 20, 2011
I wanted to setup a Samba share on a box running Ubuntu 10.4 and share it to Windows 7 computers throughout my house. When I browse the Network (thru Windows), I can see "Media Devices" that correspond with the locations of where I will put the media. The problem is that I have been unable to copy the media to the Ubuntu server because I cannot see the Ubuntu "computer" from Windows 'Network'.
All computers are on the same Workgroup
Running the following command line from Windows returns no errors and lists the samba share:
Using the testparm command on my smb.conf returns only one error (which previous googling seems to indicate is not an issue). The following is what was returned by the command:
Code:
View 3 Replies
View Related
May 30, 2010
I have a samba share that I mount locally at boot through fstab. The share is writable and if I access the share directly, say with konqueror and smb (smb://hostname/sharename) then I can do anything I want (create, write, delete, edit, files/directories). I have a mount point on my local machine
Code:
/shares/mp3
and I (username dtest) was unable to do anything except read files and create directories trying to do them to the local mountpoint except as root. I figured it would be a matter of
Code:
chown -R dtest /shares/mp3
but I was unable to do that even as root, I kept getting permission denied. When I did
Code:
ls -alt /shares/ it told me the owner was 1000 and the group was root. Dtest was already a member of the root group and I was able to
Code:
chmod -R 774
as root but I still couldn't do anything except read and create directories directly via the mountpoint. Ultimately I solved this by changing the uid of user dtest via kuser and then just chowning my home directory back to dtest. It seems like as root I should be able to change the owner of the directory. I know it's because this is a samba share, but it doesn't make any sense why root couldn't just chown it. Is there another way to change the owner of a directory, or is this set by the machine hosting the samba share?
View 3 Replies
View Related
Aug 22, 2010
I am trying to mount a shared drive on a Windows Server 2008 machine using a Linux machine (Fedora 13). I try mounting by
# mount //HOSTNAME/SHARENAME /mnt/FOLDER
and I get mount error(13): Permission denied.
I have tried other options like # mount -t nfs //HOSTNAME/SHARENAME /mnt/FOLDER -o username=USERNAME and the same thing with different filesystem types (ntfs, smbfs, cifs).
I have:
checked all firewall configurations.
verified security/sharing settings
for the drive
verified registry keys under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNfsSvrParameters
verified NFS server is running
I am familiar with Windows Server 2008 but I have never configured a system from scratch on my own. The computer I'm using used to have Windows 7 for sharing folders to a Linux server. I have just switched to Server 2008 and have not been able to mount anymore.
One thing that I think is that I tried setting up an identity mapping solution; however, I do not have a domain controller setup. I am still functioning on a workgroup.
View 1 Replies
View Related
Aug 18, 2009
I have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
View 5 Replies
View Related
Jul 7, 2010
Client OS :- Windows XP
Server OS :- Centos 5.4
Service :- samba or smb
Actually i want to take a back of windows xp's users data which on d: or etc and that backup i want to store in samba share which i made on my centos 5.4 . To do this we need to mount samba share as local drive then any script or any software can detect that share easily in that drive.
View 4 Replies
View Related
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
Aug 23, 2010
I built a Suse Linux server on vmware. I attached an RDM to the server and can now see the drive as a "Mass Storage Drive" in Applications - computer. When I double click on the icon, I get an error message that indicates that the drive can not be mounted. I tried to mount in gnome terminal using: mount /dev/sdb and get "can't find .dev/sdb in /etc/fstab or /etc/mtab". I tried adding device that I would like to mount to fstab, but don't think I have the settings correct. I looking for any info that might step me through the process.
View 2 Replies
View Related
Apr 29, 2010
We have a homegrown process that runs on a windows box and produces a csv file. We mount the directory these are output to using autofs/cifs and then process them using a program on our linux database servers.
Is there a way from linux, looking at the cifs share, to tell if the target file is currently in use by a process on the windows box? We are having issues where an incomplete file is being processed occasionally.
View 5 Replies
View Related
Mar 21, 2010
I'm trying to connect to the other computers on the network in my house, but, when I try to view the main file folders it tells me "unable to mount location: failed to mount windows share" I've looked everywhere I can think of and have done everything they've told me to do, and I still can't get it to work.
View 9 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Jan 8, 2010
using Ubuntu file browser, I browsed my Windows network and logged on to a Windows PC. Now Ubuntu file browser shows me "C$ on WinPC" as a folder. I can open it, read/write files, etc.But from bash prompt, I don't see anything of type CIFS/SMBFS listed in the output of "mount". Only the usual suspects (like local CDROM). How can refer to Windows files from Linux commandline?
View 6 Replies
View Related
Mar 6, 2011
I can see linux share folders from windows,but not the windows share files from Linux.The windows pc name is jm-pc and the share file is temp. When the command nmblookup is used it discovers the Windows pc ok.
Code:
nmblookup jm-pc
querying jm-pc on 10.0.0.255
10.0.0.3 jm-pc<00>
i created a folder /home/windows and ran the smbmount command
Code:
root[~]# smbmount \\jm-pc\temp /home/windows
mount error: could not resolve address for jm-pc: No address associated with hostname
No ip address specified and hostname not found
When i try to run smbclient,and enter the correct password that was created for samba(which is the same password as the Windows pc):
[Code]...
View 5 Replies
View Related
Mar 27, 2011
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
View 12 Replies
View Related
Jul 19, 2010
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies
View Related
Aug 13, 2010
I'm pretty new to using Linux and I installed SUSE 11.3 on Sun Virtual Box to play around with it. I am trying to mount one of my Windows shares to my SUSE system and I'm getting an error "Mount error(13): Permission denied". I have made sure my Windows permissions are open, in fact I used a test share and added everyone and gave full control. Below is the command I tried to use to mount it.
mount -t cifs -o username=Nick //computername/share /mnt/temp
I pre-created the temp folder under mnt and I tried both my PC name and my ip address in the above command with the same error each time. I also tried using my pc name in my username string as well "username=pcname/Nick" and that did not work either. Can someone advise me why this error is occuring?
Kernel version: 2.6.34-12
Thanks,
Nick
View 1 Replies
View Related
Jan 15, 2009
I'd like to find a way to mount a windows file share securely (encrypted) as I'll be communicating over the Internet.
View 4 Replies
View Related
Dec 9, 2010
I am trying to share files between my Windows XP machine and ubuntu server. I set up and configured samba following the instructions in the Online Ubuntu Server Guide. [URL] This is the abbreviated version of my smb.conf file here.
[global]
workgroup = HOME
server string = %h server
interfaces = 127.0.0.0/8, 192.168.1.101/24
# map to guest = Bad User
[code]....
View 15 Replies
View Related
May 21, 2011
I'm just setting up a partition on a seperate HDD in my system. I plan to use the partition to backup the important files on my main HDD (to guard against HD crash).
The question I have is about where would be the typical location to auto mount this partition? Which would it be normal to go for:
1. /backup/
2. /media/backup/
3. /mnt/backup/
4. /home/chris/backup/
View 7 Replies
View Related
Jan 8, 2010
i have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.
How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute
dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.
View 1 Replies
View Related
Jul 26, 2010
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies
View Related
Mar 21, 2010
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies
View Related
May 5, 2011
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
View 2 Replies
View Related
May 25, 2010
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
View 9 Replies
View Related
Jun 8, 2010
this has happened in different distros, so far i have tried slack, arch, and mint at work i have an xp box with a shared folder i created. on my linux box i setup fstab as follows
Code:
//winxp/temp$ /home/user/temp cifs rw,uid=1000,gid=1000,credentials=/home/user/.creds 0 0
this gets mounted correctly and i can read/write the shared folder at home i have a win7 box that i create a share on and use the exact same code in fstab, but it wont mount the share. i get something like permission denied or access denied is there a difference in how winxp and win7 share folders? my usernames on the linux boxes match those of my windows boxes at each location. i have given my win accounts full access and control over the win shares.
View 9 Replies
View Related
Jun 28, 2011
I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies
View Related
May 28, 2010
In my production setup, i have 3 servers using the same mount point. However, i see that the IOPS is low. Does this kind of architecture have any impact on IOPS. In case it is neutral, how can i tune my setup for better IOPS.
View 1 Replies
View Related
Sep 17, 2010
How to share files across Parent Operating system Windows 7 and Virtual Operating System Ubuntu Linux 10.4?
View 1 Replies
View Related
May 31, 2011
Given a single SMB network share (for example, \server\SHARED_FOLDER), I want to recursively list all the files, including those in the subdirectories (like find(1)).
I would prefer to do it in Linux, but I also accept Windows answers.
View 1 Replies
View Related
