Ubuntu :: White Screen After Login?
Jan 21, 2010
I'm suddenly experiencing a white screen on my laptop after logging in, possibly as a result of some routine updates last night although I can't find any posts here today recounting similar problems.It's possibly Compiz related as I can get to a visible desktop by blindly using Alt+F2 and entering "metacity --replace". Maybe even a problem with my video drivers?
View 1 Replies
ADVERTISEMENT
Dec 29, 2009
This is the 2nd time this has happened. I installed 11.1 & 11.2 later. After the install I would get the login screen just fine and then when it starts running everything goes white. It is an issue with compiz and my graphics I assume. The interesting part is in opensuse 11.0 I had all compiz items not installed. When I installed 11.1 & 11.2 they reinstalled. For next time is there a way to not have these installed on the install? What I had to do was login in a different session other than Gnome. Then go into yast and remove compiz. Then logout and log back in with gnome and the white screen is gone.
View 9 Replies
View Related
Jun 6, 2011
I'm relatively new at Linux, and I am trying to get Nagios to work correctly. I'm running CentOS if that matters. I think I followed the directions here correctly, but all I get is a blank white screen after I login. The documentation page works fine, but I don't see anything on the main http://localhost/nagios page. I have looked at other solutions to this problem (adding the correct path to the open_basedir in /etc/php.ini) and that still did nothing. Any Way to decode my httpd logs... Any time I refresh, I get these four errors from /var/log/httpd/error_log:
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Warning: require_once(/usr/local/nagios/share/includes/../config.inc.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required '/usr/local/nagios/share/includes/../config.inc.php' (include_path='.:/usr/share/pear:/usr/share/php') in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Warning: require_once(/usr/local/nagios/share/includes/../config.inc.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required '/usr/local/nagios/share/includes/../config.inc.php' (include_path='.:/usr/share/pear:/usr/share/php') in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
View 2 Replies
View Related
May 2, 2011
I did exactly this tutorial says [URL] But now my Ubuntu 11.04 is stuck at blue-white login screen. Only User Defined Session and Recovery Console options are available but they are not working as well. But when I did the Gnome 3 upgrading, it asked for me to remove unused packages and I said yes. About 20 packages removed. Do I need to reinstall my Ubuntu? Or can I get my old Gnome 2? (Not Unity, I didn't like it.)
View 1 Replies
View Related
Feb 2, 2011
Main problem: newly installed Suse 11.2/Gnome from DVD i586 goes to white screen after auto login. I re-installed once with same results. I have limited understanding of linux.
System: Biostar M7NCD Ultra mainboard with NForce Ultra 400 chipset, AMD Barton 2500 (overclocked), GForce FX5200 NVIDEA video.
FYI: I used this exact video card on an older mainboard and ran linux with it no problem and all hardware checks out okay when I drop in a HD with XPpro on it, which makes this a linux software problem by my reckoning - video setup most likely. I can boot to the green Startup Options screen and then my ignorance starts to show.
I wanted to boot to level 3 then try some things (init 3, sax2 -r) I've read about on this forum and from www search but I'm password blocked in level 3!? Install only asked me for one password and it doesn't work here.
How do I deal with the level 3 password issue?
View 3 Replies
View Related
May 1, 2010
1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
View 6 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
Apr 3, 2009
After installing the Nvidia driver I get black and white boxes displayed during KDE login. After logging in the graphics are normal. I tried installing the nvidia driver from the opensuse repository and manual installation of the latest stable driver. I do not have this problem when I use Kubuntu so I don't think it's a hardware problem.
View 9 Replies
View Related
Feb 25, 2011
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies
View Related
Sep 17, 2010
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
View 2 Replies
View Related
Oct 25, 2010
I'm new to ubuntu but I've installed ubuntu 10.10 on my desktop and it seems to work fine. But it keeps freezing up on me (sometimes a solid white screen, other times with vertical lines on a white background) and then becomes non-responsive. Sometimes there is a small (about 1in) square where the mouse was when it froze.I have a fairly old computer (emachines T6522). Is there something I can do to keep it from crashing?
View 7 Replies
View Related
Oct 29, 2010
Recently I've keep getting a white screen that flickers on and off, on my Samsung NC10 netbook.
It only seems to happen when I'm running off mains power, and screen brightness is 100%. Stops when I lower the screen brightness.
View 1 Replies
View Related
Mar 18, 2011
I'm running Ubuntu 10.10 off a desktop. I was using it for quite a while up until last night when out of nowhere while surfin', and browsing, the screen just turned white, I've tried restarting by powering off manually, as I couldn't get it to any other way. After the computer restarts, it might flash black for a sec a couple of times, then back to being white again, the BIOS screen doesn't even show up. It sounds like in the background the computer might still be loading up. My monitor is a 21"LCD, if that means anything?
View 2 Replies
View Related
Dec 22, 2008
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies
View Related
Jan 26, 2010
I have been using Netbook Remix 9.10 and it's been great until this morning.
Today when I turned it on, after Grub and the loading screen, the system brought up a smaller white screen in the corner with my username@machinename"~$ as the first line.
This looks like a terminal window. I can see my folders and use the system but I get no GUI anymore. Not sure why this is happening.
Tried booting into Recovery and updating the system, but to no avail. I've also searched the forums for the last few hours but have not found anything similar.
Anyone have any idea what to do? code...
Not sure if this is relevant to my problem or not. However, I do remember this happening on my desktop version of 9.10... that was solved by installing 9.04.
View 2 Replies
View Related
Feb 28, 2010
I have an Acer Aspire 5220 with and AMD processor and 1 GB of RAM. I had Windows vista and now have Dual Boot Vista / Kubuntu 9.10 clean install. Recently a blank white box appeared in the upper left corner of the screen. About 10-20 minutes after I log in it appears and disappears after 1-2 hours.
View 2 Replies
View Related
Apr 25, 2010
About 1/2 - 3/4 of the times I boot my PC to 10.04 RC, It quickly goes into a white screen at the beginning and then just hangs there. I updated from 9.1 and it did this, then I fresh installed and had same issue, including when I tried to boot of the 10.04RC boot CD (before 10.04 was even installed). There is nothing listed under sys/admin/hardware. In all cases, I have to hold power button, and keep rebooting...eventually, it will boot normally. I had no problems in 9.04 (nor on XP which I had on the system originally). I do not have a dual boot system, only ubuntu. I have ATI x1900 video AMD 64 X2 dual core 4200 Asus MSI motherboard 2gig ram 250 gig WD HD
View 8 Replies
View Related
May 9, 2010
After being on the computer for awhile, it suddenly stops and goes to the purple screen like one would see when turning the computer on, only slightly distorted. after a few moments it switches to a black screen with a flashing _ but you can't type anything, and then it changes so it's blank, and these white bars start to flash on the screen. I just put 10.04 on my computer about two days ago, it's been doing it since. When I first tried to upgrade from 9.10 I encountered a huge error of some sort so I just put a brand new install onto the computer from CD.
View 3 Replies
View Related
Jan 1, 2011
I started installing ubuntu and it goes thourgh the loading screen then it goes stripped white.
View 2 Replies
View Related
Feb 16, 2011
I know this is Ubuntu forums, but my other laptop has Ubuntu and I know this is a community full of very smart people (got Ubuntu help the other day).Anyway , this laptop's problem is, the screen goes teal i areas that were once white. Now, originally I thought something was broken, but now my theory is it's a loose connection. On the bottom left of the screen there is a thick black cable that leads up behind the screen and connects with that duct tape looking thing. If I simply lift up on the black cable, the screen goes back to normal.
View 1 Replies
View Related
Mar 19, 2011
Using Ubuntu 10.10.Recently updated to kernel 2.6.38.Strange problem.. all windows display fine when they are not minimized. But as soon as I minimize ANY window, all the contents are wiped out. All I get is a title bar with white window. This happens with every window e.g. browser, games, system windows, text pad etc.I am using Nvidia drivers. Could that be the problem?
View 1 Replies
View Related
Jun 17, 2011
In an attempt to find a good version of the Ievan Polkka, I went to visit Grooveshark, only to find that apart from the top Grooveshark bar andthe middle play-controls bar, everything else is white.I have installed Flash using Flash-aid. I have Java 6u26 installed manually and verified by the Java website
View 4 Replies
View Related
Aug 10, 2011
No matter what app I use, if I view a window at full screen, the contents of the window are white instead of displaying the content. I have to re-size the window smaller in order to see the contents of a window. What can be causing this and how do I fix it?
I am using a HP laptop running 11.04 in Classic mode.
View 6 Replies
View Related
Oct 5, 2010
I have 10.04 installed in a dual boot system with windows 7 pro on 1 desktops and one laptop. Also dual boot on a desktop with windows xp and Ubuntu 10.04. The two desktops run AMD processors and the laptop uses an Intel processor. On the two desktops after booting the screen will fade to black and white and then back to color. While in the black and white the computer is frozen. This happens using Firefox mainly and other programs. It never happens using my laptop with the intel processor. Does Ubuntu 10.04 have a problem with AMD processors? It does it so much it is hard to do anything with the and desktop computers, but I have never seen it happen on my intel laptop.
View 10 Replies
View Related
Feb 23, 2010
I recently downloaded Ubuntu 9.1 and burned it to a CD. However, I can't seem to get it to boot. I got to the main menu and selected to run it directly from CD, and the Ubuntu symbol showed up saying it was loading things, but then the screen went black and nothing happened even if I waited over 15 minutes. During this time the HDD light was flashing every second or two, and I could see about three white pixels at the top most row of the screen.
View 8 Replies
View Related
Feb 27, 2010
My terminal program comes up as a white screen (see Screen shot picture)and so does the login screen (Like when you run updates and it asks you to log in so you can update, YES that screen) I have searched and found nothing on this
I have a Dell Optiplex GX115
Dell LED flat screen 49T monitor
Ubuntu 9.10
512mb ram
80gb hard drive
View 3 Replies
View Related
May 10, 2010
Installed Unity from the ppa, restarted the session and got a blank screen.Now I can't figure out how to get back to GDM and reselect Gnome as my default session.
View 8 Replies
View Related
Jun 20, 2010
I 've recently installed UNR 10.04 Lucid Lynx in my old PC.
Specs:
CPU Intel Pentium 4 2.66 GHz
Mother ASRock P4i45GV R5.0
Chipset Intel 845GV w/ Intel Extreme Graphics (shared memory up to 64 / 256 MB -I don't really get which one-).
Nevertheless, when I start the Pc, Ubuntu loads and, when it's about to load the desktop, the screen turns black with white stripes and "turns itself on and off" (like when it receives no image). I don't really know if this is or not a graphic bug / problem, but it's quite strange, as I've used Ubuntu 8.10 and 9.10 before in that same Pc.
By the way, I get the same error with the normal Ubuntu Lucid. AND, I have a Win XP Professional SP2 installed (I've installed the Ubuntu afterwards, so I have the Grub as default bootloader).
Also, I get the same error when loading Ubuntu in LiveCD mode.
View 1 Replies
View Related