I've a permanent USB running natty. Synaptic would like to upgrade the kernel packages, but it fails with cryptsetup failure.
Code:
How can I get around this? Is it enough if I remove cryptsetup? AFAIK, my devices are not encrypted (at least /etc/crypttab) is empty).
Couple weeks ago my automatic update did not finished properly. It crashed (I'm not sure about the reason). Since then, I'm not able to see installed new kernels in my computers. I can see them in Synaptic package manager as installed but I do not see them when I reboot. I would like to see them and try them.
View 7 Replies View RelatedI've been using kubuntu for a while, and I've been having this issue since the release of the 2.6.32-23 kernel. Originally, I thought it was related to my raid array and this bug: [URL] I'm still not convinced they're not related, but there is also apparently the possiblity of an nvidia driver issue. Previously, I rebooted infrequently, and I had a spare hard drive installed, so my grub menu would always appear (as it detected an alternate OS on this drive) and it was trivial to select the 2.6.32-22 kernel. Since I installed all updates, including the -35 kernel, it ran update-grub and now I have to press shift when I reboot. Specs/Summary:
Kubuntu 10.04
amd64.
nvidia driver 195.36.24
RAID 1 (linux software raid)
kernels installed: 2.6.32-21 - 2.6.32.25
when I boot with -22 or earlier, everything works great. when I boot with -23 or later, I get the kubuntu splash screen, followed by it switching to tty2, then I get it switched back to where the X screen should be, with the system log displayed, and then it switches back to tty2. After installing -35, I panicked a bit as I'd never had the grub screen not show (not knowing about the shift key), and so I poked around logs and it showed nvidia driver errors. I tried removing my xorg.conf file and rebooted, and I got the desktop to show again. I prefer the nvidia driver as I sometimes use dual monitors.
Is removing previous older kernels "vmlinuz", when updates do get a newer version an easy task, or do the more recent Linux like Ubuntu 9.10 do that automatically, and only keep a few older previous kernels ?
View 6 Replies View RelatedI have an ARM based linux machine with kernel 2.6.10 .On reset it automatically gets the IP address 192.168.1.2 . I want it to wake up with address 192.168.35.133 .In /etc/network/interfaces was only an interface for loopback:auto loiface lo inet loopbackI have added:auto eth0iface eth0 inet staticaddress 192.168.35.133netmask 255.255.255.0But on next reset the IP was still 192.168.1.2
View 4 Replies View RelatedIf I have Redhat 5 Enterprise workstation, how can I configure it to point to Centos 5 so I can receive updates and fixes through Centos rather than paying for Redhat support ? I heard this can be done, but wasn't sure what the steps are in terms of configuring Redhat
View 4 Replies View RelatedI recently installed Ubuntu 9.10 on an old computerd lying around and have been pleasantly surprised by it.I had a small problem with firefox not connecting to the internet but I managed to fix this by disabling ipv6 in about:config.The problem I now have is that update manager fails to download updates and gives a message saying failed to fetch several files.I'm connected to the internet via a wired router
View 7 Replies View RelatedJust installed Ubuntu a month ago (installed within windows), and for the 2nd time it has gotten stuck in grub upon restart after doing an automatic update. Last time, I reinstalled from the CD, but I can't do that every time. Learning how to start up from grub would probably be worth learning so I don't have to use the CD. But fixing the problem is most important. It makes me wonder if it was a mistake to install Ubuntu from within Windows (does this mean I have "wubu"?). I did find a webpage on booting Ubuntu from grub, but I could not get the kernel to load, regardless of if I used the instructions for wubu or not.
View 3 Replies View RelatedI regularly check for updates via Update Manager. I have, as of today started getting errors, some updates did not upload.
View 2 Replies View RelatedI just did a software update moments ago of things that were in the auto update thingthere were around 20 of them and some were for abrt and some kerneloops thing...But now i can't boot up...I get the following error...
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Boot has failed, sleeping forever.
[code]....
I recently upgraded to Fedora 14, and was surprised to find that OpenOffice is not included in the distro like it was in previous versions. Anyways after installing it it was working until while ago when I downloaded the recommended updates, and now when I try to start it, nothing happens.
View 2 Replies View RelatedI think I need some command line help here. I am trying to download the initial updates using Yum Extender GUI in LDXE desktop. It downloads the updates until about 90% then If I get any error it craps out. I have gotten errors relating to no key avaliable, sorry don't remember the precise text, and also that no repo is avalable for a specific pacakge. At this point there are no options given to skip, etc... just "OK" and Yum Extender closes and I have to start over. It seems to start over about were it left of, this leads me to believe the packges are being stored some where on the drive.
Without using the GUI, hey I'm trying to switch from Windoz, Is there a command line that will tell Yum to download all updates and install and skip errors? I imagine there must be if this package installer is working, it must be talking to the system in a similar manor.
I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!
Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View RelatedFor some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
I just learned that warsow 0.6 is out, and went to see if it was available in the ubuntu software center yet, as opposed to going and downloading and installing it manually from the warsow website. The ubuntu repo's still have version 0.5, and at the bottom of the page it says:
"Updates: Canonical does not provide updates for Warsow. Some updates may be provided by the Ubuntu community."
So if I wanted to 'update' this item in the repo's for the better of the community what would that entail?
Due to hardware failure I have had to set up a server several times. Each time it takes more than a day to set it up from scratch and import the databases etc. I would like a solution that separates all the data, including the configuration files, from the binaries and stores the data on a portable medium that can be quickly used to setup a new server.
Here are the details. I don't use Apache Friends' xampp, instead I set up apache2, php, mysql according to the instructions in [URL].. So the php, css, html etc files are in /var/www, the apache config files are in /etc/apache2 and the mysql data is in /var/lib/mysql. What is the simplest way of making the data and configuration files portable so that I can quickly set up the same server on a new machine that I have first installed Ubuntu on?
Can I put the above mentioned partitions and directories on a usb drive? Should I always make regular dumps of the mysql data and use the dump files instead? Should I keep the whole lot on the local hard drive and find a way using rsync, unison etc to mirror the files onto another potential backup machine on a regular basis - this is not a trivial operation if all the file permissions and ownerships are to be preserved.
There are some updates in the Update Manager list which I do not install. Among them, some drivers for HP Printers (I don't know why this cropped up; I don't even use printers on my laptop), and gcj updates (I use gcc/g++ but not gcj). I unchecked them the first time I saw them on my UM list. However, for every subsequent batch of new updates, UM retains these updates and I need to uncheck them every time. How can I remove them totally from my UM list?
View 2 Replies View RelatedI'm looking to setup X11 forwarding on my machine and secure it either with a vpn or ssh. A portable x11 client is need for access on the go. I am not sure if I am over complicating the issue but security is a must and some app I can run in windows on a thumb drive is a must.
View 4 Replies View RelatedI removed my old 160Gb laptop drive to install a new 320Gb drive. The 160Gb drive is partitioned as follows: 20Gb unallocated partition, 115Gb ext3 partition (running ubuntu 10.04), and 5Gb swap.
I placed this drive in a portable enclosure so that I could retrieve data from it. The Disk Utility in Ubuntu recognizes the drive but the partitions are not recognized, shows unknown and the only option available is to format the volume. If I place the drive back into my laptop, the drive boots normally and data is accessible.
I have connected other portable USB drives and they work (NTFS formatted), so USB ports are not the problem.
My portable HDD is suddenly saying that I don't have write permission anymore.
properties>permissions says that I have full read/write permission over the top folder of the drive. After looking in the permissions I'm out of ideas.
I checked the properties of the drive itself and it said "Permissions could not be determined"
I haven't changed the permissions deliberately - I use this hard drive every other day to move movies across to my TV.
can I can use the Ubuntu USB-installer as a portable operating system (through the "try it" feature) by selecting "persistence" when I follow the instructions to load Ubuntu onto a bootable external hard drive
View 9 Replies View RelatedI did originally have Ubuntu 10.04, in which gave me the same problem. I have upgraded to Ubuntu 10.10.I have been using the portable Adobe Photoshop CS5 application for a while now however it has kind of broken on me now. Everytime I tun the application now, it gives me a runtime error.
"Runtime Error!
Program C:Pro.
R6034
An application has made an attempt to load the C runtime library incorrectly. contact the application's support team for more info" I have tried re-installing several times now. Even downloading a different version. I am also running it through wine through the following command.. "wine "C:Program FilesPhotoshopPortablePhotoshopCS5Portable.exe"
I've just tried to install PS CS5 portable in wine but I get a R6034 error. Does anyone know what I need to do?
View 1 Replies View RelatedI haven't heard of anyone doing this and I am wondering why not. I have an equipment closet. Where I have a home server, network gear, directv box, dvd player, stereo system(yet to come). I have only heard of people putting fans in such closets and wondering why not a portable air conditioner? I am thinking I want a
SOLEUS AIR PE6-10R-03 Portable Air Conditioner from new egg for about $315
It claims 45db 256 CFM and 2 pints/hour dehumidifer. That sounds perfect to me for a media closet but am wondering why I don't see others using a portable air conditioner for a media closet? They had a cheaper unit but it doesn't claim to have a fan which I think circulation is a must for a media closet. There is even a drain that is on the other side of the wall that I can run the drain pipe to. All I need to do is run a exhaust duct through the attic and to an exhaust that I can put in my roof overhang.
I have spent the summer and just got my few must-have Windows programs over to Ubuntu 11.04 (64-bit), got it customized with Docky (under Ubuntu Classic) and everything is SWEET. (But don't get me going on Unity dock). One problem: if I boot with my 1TB portable hard drive plugged in Ubuntu will recognize it. If I plug a portable drive in after the boot, I get this error below. I tried Mounting manually and with Archive Mount
View 1 Replies View RelatedDoes "Portable Ubuntu" run separate from Windows? Point being, would I be vulnerable to Windows based trojans if I ran Firefox from Portable Ubuntu on Windows?
View 1 Replies View Relatedupdates manager constantly crash i tried gnome in safe mode and it doesn't work so i need some way to update the os untill hopefully one update would fix the update.
View 5 Replies View RelatedSo, it is my understanding that Ubuntu's automatic updates do not install ANY updates that are not "important security updates." For example, it did not upgrade me to Firefox 4 automatically; I had to do it myself (Don't all new browser versions usually contain new security features/patches? Oh well...That is a separate question entirely).
ANYWAY, is there some way to get the latest stable versions of all of my open-source software automatically (or at least all at once, on command), instead of just security updates? It seems silly to have to install new versions for every program manually.
Also, related/side question: Now that I have installed Firefox 4 myself (via apt-get by adding the mozilla-stable PPA), will I stop getting security updates for Firefox through the standard Ubuntu update manager?
Actually, a really thorough explanation of the whole automatic update system (or a link to one) would be great too.
I got a CentOS 5.3 fileserver machine (no monitor/kb/mouse). I'd like to "pair" it with a specific USB drive, so that when this USB drive is connected and mounted it would start a backup - just a simple cp /source /target will do for now - it's the "autorun on mounted a specific USB drive" part I can't really solve. Is there an elegant way to do this some sort of autorun? My only really rough idea to do it is to check if the USB drive is available with a script run in crontab every minute :-
View 7 Replies View Related