Just when I had everything running so well. Graphics were good and I even had multiple VM's running. Today FC says I have 246 updates. The updates good through fine. I reboot my machine and now it's stuck. ArrrgIt is stuck at the message: ADDRCONF (NETDEV_CHANGE): eth0: link becomes ready
View 9 RepliesJust installed Ubuntu a month ago (installed within windows), and for the 2nd time it has gotten stuck in grub upon restart after doing an automatic update. Last time, I reinstalled from the CD, but I can't do that every time. Learning how to start up from grub would probably be worth learning so I don't have to use the CD. But fixing the problem is most important. It makes me wonder if it was a mistake to install Ubuntu from within Windows (does this mean I have "wubu"?). I did find a webpage on booting Ubuntu from grub, but I could not get the kernel to load, regardless of if I used the instructions for wubu or not.
View 3 Replies View RelatedTo give a bit of background, I started using Fedora at Fedora Core 2. I've installed and upgraded Fedora several times in the last few years.However, I'm not a Linux master, and there are many things I don't know how to do. When I need help, I can usually find an answer, but not this time.
I've just wiped clean my hard drive (after backing up to a separate drive), repartitioned it, and have installed F11. There were a few glitches along the way regarding the repartitioning, but they got worked out.Oh, before the install, I also added a new 1TB SATA hard drive to the system.Now that the initial install is done, I'm trying to boot up and complete the process, but the system hangs after checking filesystems. Yes, it already checked and passed the new 1TB drive.I've left the machine at this step for an hour and it has not yet loaded the firstboot screen to complete the install process.
fedora 13.I have ran fedora for a little while now and its quite good, a lot more stable than I was led to believe and add/remove tool has a great variety. So today I was booting up and decided to "type" as fedora was booting. The long and the short of this is that fedora stops at this well the bar fills just before nvidia screen/login dialog pops up and freezes there.
View 8 Replies View RelatedIt's trying to fix/complete failed installs but keeps encountering the same errors (error message below). I'm running basically Testing, but there are a few Stable and SID packages due to issues with the blasted nVidia legacy drivers. I've swapped out the video board with an ATI board so that is sorted, but now I can't do any updates. Hoping there is some way to manually override apt's determination to try to fix all broken packages whenever I do anything (install, remove, update, etc). A Google search of this error message didn't turn up anything recent. Any thoughts are welcome.
[Code].....
Looking for an option to get Fedora working again, I followed Leighs guide to install the kernel nvidia driver. On Reboot however I am stuck a the Fedora splash.Is there a way when booting to disable splash, or enter in safe mode?I have an nvidia geforce 9 card and I used the non-PAE install.
View 6 Replies View RelatedI'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies View RelatedI just did a software update moments ago of things that were in the auto update thingthere were around 20 of them and some were for abrt and some kerneloops thing...But now i can't boot up...I get the following error...
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Boot has failed, sleeping forever.
[code]....
Performed the daily update, don't recall which packages were available, and the boot process freezes near the end upon trying to start my VNC server. Using rescue disk removed tiger-vnc server. Oddly upon reboot, selinux reset the files even though initial setting was 'permissive'. have not tried re-installed vnc yet.
View 3 Replies View RelatedI am new to Ubuntu and I am running v10.10 through VMPlayer on Windows 7. I wanted to run the updates through the Update Manager. After downloading them and installing them, my VM rebooted and has not worked properly ever since.
When it boots now I get a screen which has my computer name "jason-virtual-machine" and its just frozen there. I tried the "recovery mode" but that does not boot up either.
What happened and what can I do to fix this?
Forgive the terseness. I'm frazzled with this issue, perhaps I should have asked earlier. Every weekend for the past 2 months has been an endless cycle of 'repair broken system' off the install disk.
Installed from Ubuntu server 10.04LTS x86_64, + xfce-desktop Here is uname -a Linux ournas 2.6.32-25-server #45-Ubuntu SMP Sat Oct 16 20:06:58 UTC 2010 x86_64 GNU/Linux If I add my raid + lvm to the fstab file, the boot stalls, (no error it, just hangs waiting, forever). So that's a not very user friendly to start with.
I've tried the suggestions about UUID in fstab tried using LABEL instead, or even /dev/xxx. Every time it hangs. I've googled this endlessly and not found a solution. So don't ask why... since I seem to have tried every odd suggestion to fix this, I've lost track. There seems to be some consensus that whoever gave us plymouth laid an egg. Forgive me if I'm wrong, but did we need a better graphical boot if it breaks everything else?
[Code]...
The little red popup window (packagekit) from the lower right showed yum updates
I did a yum update and no updates!
I tried again this morning and no updates
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
I started my computer up in ubuntu today and got an error while it was running through a system check. It said "Errors were found while checking the disk drive for /". I pressed F to fix it and a while later, instead of booting like it normally would, it went to the terminal.
It asked for me to login, and when I did, it said:
/usr/lib/update-notifier/update-motd-updates-available: 52: cannot create /var/lib/update-notifier/updates-available: Directory nonexistent
[code]....
the boot of my server is stuck at the message "GRUB"
I've allready tried :
chroot /mnt/sysimage
grub-install /dev/cciss/c0d0
but with no improvement. What else can I try?
Been trying to follow this tutorial [URL] ..... and when I reboot and select the entry with Xen GRUB hangs at loading initial ramdisk ....
View 0 Replies View RelatedI have had to reinstall SuSE 11.2. After its successful completion it got into a strange situation: the boot loader identified a boot record on the hard drive and displayed the appropriate message on the screen - but then nothing happened. When I restarted the system with the live CD and chose "boot from hard drive" it got to the normal boot menu without difficulty. I have no idea why the second method succeeds while the first fails
View 3 Replies View RelatedI was able to login openSuSe/KDE. Now, every time I enter my username and password the system hangs half-way through the Boot Logo.
View 4 Replies View RelatedI lost power during my Ubuntu update and when I powered back up ubuntu was broken. Now the stupid bit. My hdd was partitioned into 3 bits, vista os, data, and ubuntu. In vista I deleted the ubuntu part and merged it with the data part. Now when I power up my computer it goes straight to a black screen that says...
error : no such partition.
grub rescue> I have looked through the forums for an answer to my problem but to no avail. When I put the ubuntu live cd in and turn back on itjust goes to the same screen. I'm a novice to the world of computers and need any help you can offer.
I had a dual-boot windows7 n Ubuntu 10.10
reinstalled windows...
Now when i try reinstalling Ubuntu, the USB boot is detected but is stuck...
Tried changing download sources, USBs...it is happening on all notebook computer i tried booting with it...
I upgraded my 9.10 Ubuntu install last night using the Update Manager, everything downloaded fine, and appeared to install correctly. When it finished I got the message advising that my machine needed to reboot for changes to take effect. I checked my mail quickly before rebooting, and then let it do its thing. It shut down fine, then booted up and went into MemTest86. No real worries, so I wandered off expecting it to take 10-20 minutes. After 4 hours, though, I was starting to worry. A message at the bottom of the screen advised something along the lines that the test had been successful, and I could press Escape to exit.
I did, and my machine rebooted, and went back into MemTest86. I just figured I was being too impatient and left the test running all night. My machine has now been running MemTest86 for 16 hours, and while the timer is still running and the tests refreshing, my keyboard is not responding.
I updated my server via SSH from another computer. I'm running Ubuntu 10.10 on my old laptop. I updated it at the 1/3. But now i experience problems! Since the update there where Radeon driver updates which made Ubuntu not to load X. [URL] You can see the update @ 1/3. The computer is a HP 6715s. As I can remember there is a Radeon X1250 in the computer. How can I get the old version working again without reinstalling?
[Code]....
I have currently installed the ubuntu 11.04 natty narwhal edition through the wubi installer alongside windows 7. I wanted to just check out what the kde environment had to offer differently from the default desktop environment which is gnome unity environment.
I installed the kde environment using some sudo command given by google. After using kde environment for a few hours, I just began to feel, I liked the default gnome environment better (in classic mode) as compared to kde as I was more used to the former.
So I uninstalled kde with another sudo command which I got by googling. At the final step of the uninstallation, I admit I am not sure whether what I did was right or wrong. There was sth related to 'daemon' that popped up eventually and I chose yes for that and kde was uninstalled successfully or atleast that's what I thought.
But to my horror, when i tried rebooting my laptop to ubuntu gnome, the blue coloured kubuntu logo was popping once again and I had to go back to the synaptic package manager and delete sth called the 'plymouth' package to remove the kubuntu logo.
Now after doing all these, when I tried booting ubuntu, I was not able to get to the gnome login screen. The screen was just stuck with the ubuntu logo and the process bar blinking and gnome never started.
When I pressed the Esc key to check out what was happening from behind, I could see that some processes were being checked and there was a [ok] after everything and there was a [FAIL] next to "starting CPU interrupts balancing daemon". And the terminal screen ended with "stopping system V run level compatibility". I am not sure if this might be the root cause of blocking the boot-up. But I couldn't get a screenshot of those intermittent terminal screens as I was not in a position to type in any commands such as fbgrab which can be used to grab a screenshot of the terminal screen.
Eventually after intense googling, I figured how to manually configure gnome to start up. I pressed the Cnt + Alt +F1 as soon as the white ubuntu logo popped up and after logging in into my ubuntu account through the terminal interface, I typed in the following things:
And then voila I got the gnome login screen. I temporarily heaved a sigh of relief. (by the way I saw something flash quickly on the terminal moments before it went to the gnome login screen like "you need not init this way or sth"..I just couldn't catch sight of it properly as it flashed only for a few moments)
But I am not satisfied. Obviously there might be a way to set this problem right isn't it? Kindly someone pls throw some light on this issue. I want gdm to be automatically activated during boot. Its a big pain to manually configure it everytime I boot. Is it possible to do a windows restore to set the ubuntu right? But I saw in some forums mention that something called the boot.ini will botch up if we perform a system restore in win 7.
Method that does not involve uninstalling ubuntu and reinstalling it. This is because I have done a lot of tweaks, optimisations and installed lot of apps in it. I do not have a system image backup as well. So it will be a nightmare to do all these things over and over again. The mistake or rather the drawback from my side is I just have my laptop alone and do not have another standalone desktop to experiment with linux.
I was on Windows and I accidentally deleted my Ubuntu install. Now when I boot I have Windows 7 and Ubuntu, and it's corrupt. So I went to add remove programs in Windows 7 and it just deleted the Ubuntu uninstaller (cause i deleted it) and now i'm stuck with a corrupt boot, how to remove it because I want to re install Ubuntu and it's annoying having 2 Ubuntu systems (one corrupt) and Windows 7 on my boot screen.
View 3 Replies View RelatedAfter my last update in my ubuntu, I had a problem. (As almost everytime that I update it)
When I select to boot ubuntu, it doesn't work.It shows something like:"GNU GRUB version 1.97"beta 4[ Minimal BASH-like line editing is supported.For the first word, TAB lists possible command completions.Anywhere else TAB lists possible device/file completions]
sh:grub> "And I don't know how to make it work.I tried to follow this tutorial:[URL]I got an error message saying that the file couldn't be found. And if I skip it, when I type "boot" the system reboots and comes to the same place I was before.
I've also tried to set another partitions like
I am using CentOS 5.2 with GRUB booting a software RAID configuration. The first disk is md0 and is mirrored across sda1 and sdb1.I manually re-installed grub using grub-install and the machine will no longer boot off of the HD. The grub menu comes up, I can select my kernel the machine then jumps to loading the initrd and hangs.It will go no further. I have a live DVD that can boot from the HD. If I use that to first boot from the DVD, then specifiy the HD, it shows the same grub menu and then the machine boots fine w/o the initrd hang.I have tried re-installing grub but not been able to get the machine to work again w/o the DVD.
View 3 Replies View RelatedI've just installed Debian 6.0.1a on a HP Proliant ML115, the install seemed to go ok. As it began to start up it 'Grub Bootloader' loaded then on the screen after the bootup froze at 'Loading initial ramdisk'
Unfortunately im a complete novice to debian
I have SUSE 11.3 on an Acer Aspire 3620 (laptop). When it boots up, it gets stuck and doesn't complete the process. Can't use safe boot either because I can't get past the login- when I type the password, no keystrokes appear, regardless of the key I strike. Here's how I got into this situation and a little more description of the problem. After my laptop got some nasty bugs that damaged Windows XP so badly that I couldn't use the rescue disk (that I so obediently made per instructions), I bought several linux flavors on Live CD/DVD and decided to go with SUSE. I had been using the Live DVD for about a month and everything worked well so I installed it last weekend (SUSE only -no dual operating system). Everything went well for a couple of days and I even used Yast to get Adobe Flash. Then I plugged in my MP3 Player to recharge it and quirky things started happening.
Once, the computer went in to standby and I couldn't get to the login screen - I started pushing all the keys and something worked. That evening I closed the laptop (so it should have gone to suspend) with the MP3 player attached still, and pulled it out, probably as the computer was going through the motions or shortly thereafter. (My player and usb stick suffer no ill consequences if not ejected properly.) Since then I have not been able to boot up. I powered down several times and tried. It seems to start normally with the green screen and little reptile appearing as the monitoring bar grows. Then it goes black, except the cursor's spinning wheel indicating activity. Then comes back to the green screen, with the bar still increasing and nearly making it to completion. Then the black screen and cursor-- forever. Eventually I can hear that the harddrive is no longer spinning.
Also, when the black screen appears, there is an error message that says that the configuration settings for Gnome Power Manager were not installed properly, which I highly doubt since I had no trouble in the installation, but maybe that is pointing the right direction to the problem. Anyway, now I am back to Live DVD, so that I can surf for the answer to this problem. Least that works! Before installing, when I was using SUSE as a live DVD, it sometimes was a little quirky when I inserted the MP3 Player and USB Stick- sometimes wouldn't recognize them, sometimes would, sometimes wouldn't/couldn't unmount. Firefox also would start crashing after alot of use, but I could reboot and things were fine, so I thought this might just be due to the fact that it was Live and not Installed.
I installed it with the default, KDE. I read another post somewhere with a similar problem in which the author says KDE is very bad with inserted media but I wouldn't know if that's true or not. This is the first time I've used linux, apart from a little bit of experience at work. It really has it's ups and downs, when it was working, it was so exciting, when I got hung up so soon, disappointing. The only thing I can think of to do now is reinstall and tip-toe around being extra careful about the quirks when connecting devices. Not very practical though. Thanks for listening to this long story. Will be trying to get it fixed in the evenings after work EST.
PS IF you can bear to read another line. The live DVD I bought was rather badly scratched and scuffed in my opinion. Although there were no installation errors that I could see, would this have had an unknown immeasurable effect that could account for weird behavior?
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
I have just recently installed Linux Lime along with windows 7 Home Premium. Before, there would be a menu asking me which operating system I would like to use. When I click linux it goes to linux and windows 7 goes to windows 7. Now when I click Linux, the black screen you get at the beginning shows a - (dash) constantly flashing on a black screen and won't boot to linux. This is normal as it does that for a second then boots. Now its stuck on that flashing dash on a black screen and won't boot.
View 1 Replies View Related