In my CentOS5.4 I need to install gtk+-2.12.2, it demands glib-2.22.3, and system has only glib-2.13.5I download and install glib-2.22.3 with command ./configure --prefix=/opt/glib-2.22.3 && make && make installDownloaded gtk+-2.12.2 and compiling like ./configure --prefix=/opt/gtk+-2.12.2 --with-glib=/opt/glib-2.22.3gives error:Requested 'glib-2.0 >= 2.13.5' but version of GLib is 2.12.3Consider adjusting the PKG_CONFIG_PATH environment variable if youinstalled software in a non-standard prefixI made $ export PKG_CONFIG_PATH=/opt/glib-2.22.3/bin:$PKG_CONFIG_PATHAnd please specify if here I have to write /opt/glib-2.22.3/bin or /opt/glib-2.22.3?and echo $PKG_CONFIG_PATH - I see my lib in $PKG_CONFIG_PATH
I'm trying to install the latest version of tracker - 0.8.15. When I run ./configure, I come up with an error like this:
Code: checking for getline... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB2... configure: error: Package requirements (glib-2.0 >= 2.24.0) were not met: No package 'glib-2.0' found
[Code]...
Surely the libglib2.0-0 package is some kind of replacement for glib-2.0? My understanding from the man page is that PKG_CONFIG_PATH is some way of linking to and checking requested packages... is this right? Can I change it to point at the libglib package instead?
i ran into a problem while isntalling xine player on fedora 11, i first of all installed its core engine 'xine-lib' successfully with standard prefix! when i run the './configure' for its frontend (xine-ui) it gives this error.
No package 'libxine' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XINE_CFLAGS and XINE_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).
When I do #./pdfedit.SlackBuil I get the information in the terminal:
[Code]...
Whether we want to checking PDFedit prepare-core-dev package ... yes Whether we want to checking build PDFedit gui ... yes configure: error: QTDIR environment variable must Be Set
checking what language compliance flags to pass to the C compiler... checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.16... yes configure: error: glib-compile-schemas not found. < ---
1. How to determine what package glib-compile-schemas belongs to ?
2. Where to get the package ?
I'm basically trying to install Anjuta 3.0 and getting this error when I run ./configure
Objective: Create a guide to building the now orphaned pam_usb source for Laughlin and summarize the make/install process so that everyone can easily do their own make.
I have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1 checking for a BSD compatible install... /usr/bin/install -c checking whether we are using gcc... yes
(gimp:4216): GLib-WARNING **: /build/buildd/glib2.0-2.28.6/./glib/goption.c:2132: ignoring no-arg, optional-arg or filename flags ( on option of type 0 segmentation fault
gimp stopped working on kubuntu after installing updates, any fix?
On my openSuSE 11.4 with GNome, zypper throws lots of errors when used on the command line.However, zypper does it's work correctly, but the error messages are annoying.Does anybody know what the problem is ?The error messages:
I'm getting this error when I try to login: GLib can't find the user in list [0] or something like that. This happens when I try to login using the graphical method. It logins properly when in failsafe mode. I'm using Lucid, and this happens after the hard drive load is shown in the splash screen following the login screen. It just jumps back to the login screen after this.
Im trying to install cUrlFtpFs. I get an error when run the configure file though, it says:************************************************** *checking for GLIB... configure: error: Package requirements (glib-2.0) were not met:No package 'glib-2.0' foundConsider adjusting the PKG_CONFIG_PATH environment variable if youinstalled software in a non-standard prefix.Alternatively, you may set the environment variables GLIB_CFLAGSand GLIB_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.***********************************************echo $PKG_CONFIG_PATHecho $GLIB_LIBSecho $GLIB_CFLAGS
My level is starter with Ubuntu. Moderate experience with C.Problem starting with programming in C under Ubuntu.I have installed Anjuta IDE and made this classical program.
I am trying to install a program called airfart and when I run make after cd'ing to the appropriate file i get this
Code:
g++ -g `pkg-config gtk+-2.0 --cflags` -o src/main.o -c src/main.cpp Package gtk+-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `gtk+-2.0.pc'
I have slackware 64 13.37 Kernel 2.6.37.6 I am trying to install notifcation daemon so I can use notify-send. I am trying to install the package notification-daemon, via sbopkg using the 13.37 repository. I have installed dependencies: ORBit2, GConf, libsexy.I hit this error during installation of notification-daemon.
/usr/lib/libdbus-glib-1.so: could not read symbols: File in wrong format collect2: ld returned 1 exit status
I did previously have gsb gnome 3 installed, but removed that and then lost notify-send.
I am trying to install syslog-ng-3.0.2 on Fedora 12 and have run into an issue I don't know how to solve. When runing the "configure --enable-ssl" I get the following "checking for pkg-config... (cached) /usr/bin/pkg-config checking pkg-config is at least version 0.14 checking for GLIB - version >= 2.0... 2.0, bad version string no configure: error: Cannot find GLIB version >= 2.0: is pkg-config in path?" I have glib-2.24.0 installed on this system so I don't understand where this issue is coming from or how to fix it.
Back ground on my system - [root@syslog-ng]# set PKG_CONFIG=/usr/lib/pkgconfig [root@syslog-ng]# export PKG_CONFIG
My recent issue is that when i start firefox 3.6.7 OS 9.10 is that the terminal will pop up and have this error: (firefox-bin:2690): GLib-WARNING **: g_set_prgname() called multiple times. I can only have firefox running when the terminal is running.If I close the terminal firefox will close as well
I am trying to build Pidgin on my Lucid install and on running configure, I get the following:
Quote:
configure: error: You must have GLib 2.4.0 or newer development headers installed to build.
If you have these installed already you may need to install pkg-config so I can find them. I tried installing pkg-config, but it's already in its newest version. I then tried going to the following website
[URL]
and downloaded and extracted glib on my computer. That changed nothing. I was hoping someone could tell me what's going on here. I just tried the this:
Quote:
sudo apt-get install libgtk2.0-0
and got
Quote:
libgtk2.0-0 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
"(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)"
It comes after choosing language, when the Ubuntu start-up logo shows with the 5 dut under it. I am trying to install Ubuntu Netbook on a little Compaq Mini.
When i try to install Ubuntu 11.04 or try without installing i get graphics like this:[URL] same with older versions, and on older versions i used to get this error: (process:257):GLib-Warning**:getpwuid_r():failed due to unknown user id(0) but on new version it dosent appear. My graphics card is: GeForce 7600GT MSI.
What's the centos-approved way to handle group environment configuration? Let's say there are users in, oh, 4 different groups. Let's use the usual suspects:
accounting warehouse admin netadmin
and I want to set up environment variables and maybe some pathing that are specific to a given group. So that when 'joeblow', who is a member of group 'warehouse', logs in, the pathing and environment variables (and whatever else) that is needed for users in the 'warehouse' group is set up and configured.
What I was initially looking for was an /etc/groups.d, and in /etc/groups.d is
As part of the login process, the group memberships for the login username would be examined, and for each hit the respective /etc/groups.d/ script would be run. I'm not seeing anything like that, so I'm assuming centos uses some other mechanism, but I'm obviously not using the proper keyword mojo. Can someone point me to where this mechanism is described?
my problem is inkscape-0.48.0-1.fc14.3.src.rpm in fedora 14 64 bittry rebuild --source inkscape-0.48.0-1.fc14.3.src.rpm and this my error:I think something wrong pkgconfig .
attributes.cpp:20:32: fatal error: glib.h: No such file or directory compilation terminated. arc-context.cpp:21:28: fatal error: gdk/gdkkeysyms.h: No such file or directory
An update to the Pan Newsreader (0.134, "Wait for Me") is out as of February 15, 2011. This release is supposed to add some functionality as well as some bug fixes. Has anyone successfully installed from the source code? I have tried, but have not been successful. I get an error message about "GLIB" not being found. Does anyone know a site for which a .deb file for this can be downloaded?
I am trying to install wireshark latest version on Fedora core 9. It has a dependency on gtk2.0 > 2.4, I tried installing gtk+2.18, But this sucks.GTK inturn has dependencies on glib(2.21), atk , pango and cairo. I have old version of glib i.e 2.16.6 which comes of fc9 distro. I downloaded and installed glib 2.22 from the source( ./compile, make and make install). The installation was succesful, the libraries get generated in /usr/local/lib. After installing glib, still I get this error while installing gtk+2.
Error:
///////////////// " checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.21.3 atk >= 1.13.0 pango >= 1.20 cairo >= 1.6) were not met:
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found /bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
I am facing problems when trying to install gtk+, I have downloaded all the required libraries, but the following output?
checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.21.3 atk >= 1.13.0 pango >= 1.20 cairo >= 1.6) were not met:
Requested 'glib-2.0 >= 2.21.3' but version of GLib is 2.12.3
No package 'atk' found No package 'pango' found No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. you may set the environment variables BASE_DEPENDENCIES_CFLAGS and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
